How do I show the master and version copy of a pic seperately?

I have downloaded the trial of Aperture 2, and seem to like what I see so far. I'm having a little trouble
learning a few things though. I wish I had a real book to study, but I know this software is so new.
Here is my problem, when I first started using the program, whenever I chose an image from the browser, and started editing in the viewer, a second copy was imediately put next to the master copy in my browser after i was finished. I like this because as i scrolled through my browser I was able to see
both copys side by side, same pic number, master and edited version.
Now in certain projects when i scroll through the browser I only see the edited version without the master sitting right next to it. I must have clicked on something, but I can't figure out how to get both side by side again in the browser. So far the only way I can see some of the masters in the project is by hitting the M key or going to toolbar, and clicking on show master, but I can't see the master by itself in the browser. Sorry if i'm confusing anyone, but if anyone can help I would really appreciate it. Thank you. Tommy

Thanks, sekoya, dave, and DY,
I tried what Dave said and it worked, but it's kind of weird, in one project when I edit it does create
the new version, but puts a stack box around it. Ian different project it just shows 2 seperate picture with the same numbers, but not highlighted for a stack.
I really appreciate the info, I know this is probably kind of petty, but I hate being stumped by things like this.
So how would I be able to show just masters in the browser without having to dig through the versions first? Again, this forum has always been very helpful to me in the past. Thanks to anyone who helps. Tommy

Similar Messages

How can I show the number of version of document in the layout set iview?

I have enabled the version of KM folder.
I add the "rnd:icon,rnd:displayname(contentLink+rnd:action,contentlength,col:rating,rnd:collaborationstatus,modified,enhancedcollection,rnd:numberOfDocs" in document properties, but I would like to show the number of version.
What is the property name of version number?
Thank you for every answering,

Hi Boonma,
Pls refer to the http://forums.sdn.sap.com/thread.jspa?threadID=37904 thread.
Thanks
Prasad

How can I show the date and time on the pictures in iMovie

I am trying to make a slide show. The date and time the pictures were taken are the important information that I would like to show in the slide show. However, I cannot find the way to do that in iMovie.

I am trying to make a slide show. The date and time the pictures were taken are the important information that I would like to show in the slide show. However, I cannot find the way to do that in iMovie.

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

I just updated to Adobe Reader 11.0.07 on my Mac 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I just updated to Adobe Reader 11.0.07 on my Mac OS version 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)." My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac? Sometimes when I try to view streaming video I get sound but no video.
>

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version. How can I have the header and footer included when I open a template?

That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user. Among the surprises:
- it strips out images from headers and footers without warning
- it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
- it strips out alternating left/right margins, without warning.
There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
-mail merge
-meaningful Applescript/Services support
-non-contiguous text selection
-ability to set defaul zoom
-ability to see comments while editing
-ability to print comments
-ability to read RTF files
-ability to drag in hyperlinked ted from a browser
These about about 90 other features are gone.
Then there are the bugs. Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers. Many reports of the program crashing, courrupting files, etc.
Fortunately for you, the previous version of Pages is still on your system. Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!). Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

The box in my Photoshop Elements, which shows the size and types of brushes has shrunk to one unreadable line. How do I expand the box to its original size? I have tried dragging it open but nothing moves.

The box in my Photoshop Elements, which shows the size and type of brushes, has shrunk to one unreadable line. How can I expand this box to its original size? I have tried dragging it open but nothing happens and none of the tool boxes appear to give me an expansion option

Well, when you open the program, the splash screen, the window you see while the program is opening, should make that clear enough. For example:

How do you get the sender and receiver pics to show up in iMessage

How do you get the sender and receiver pics to show up in iMessage

'''If this is a new Pop mail account''',
Those folders do not appear until you have actually Sent or saved a Draft email.
check settings:
Tools > Account Settings > Copies & Folders
* select: 'place a copy in'
* select: 'Sent' folder on the mail account
For Archive
* select 'keep message archives in:'
* choose ' 'Archives' folder on mail account
For Drafts and Templates
* choose 'Drafts' folder on mail account
* choose 'Templates' folder on mail account
* click on OK
'''If you have an IMAP mail account''',
you need to make sure you have selected to subscribe to see those folders.
Then make sure your settings use those folders.
Tools > Account Settings > Copies & Folders
* select: 'place a copy in'
* select: 'Other' and choose the sent folder on the server mail account
* If you want all Archive, Drafts and Templates to also be saved to the server folders, choose 'Other' and the respective folder on the server mail account.
* Click on OK to save changes.
More info on synchronising:
* https://support.mozilla.org/en-US/kb/imap-synchronization
Info on IMAP gmail:
* https://support.mozilla.org/en-US/kb/thunderbird-and-gmail
I note that you are using a gmail mail account. Please note that the gmail 'All Mail' folder is gmails archive copy of all of your emails, so if you subscribe to see this folder it will double the amount of space used. It is suggested that you do not subscribe to see this folder.
Read section under 'All Mail':
* http://kb.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite

Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

Hi AppleLove78,
I'm sorry to hear you are having issues with your new iPhone 6. If you continue to have audio or call quality issues, you may find the information and troubleshooting steps outlined in the following article helpful:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
Regards,
- Brenden

How do I get the starter home screen back to showing the time and weather?

The phone had showed the time and weather from the starter mode and now it doesn't. How do I get it back to showing it?

We would be delighted to assist today Arkad! Do you mind sharing your current device? Let's get this resolved.
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

How can i get the time and result together show in one Array or in Cluster?

hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF ‏54 KB

You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG ‏11 KB

How can i do to see the master and text values of the Key figure 0UNIT

Hi gurus,
How can i do to see the master and text values of the Key figure 0UNIT, please step by step, i m in the key figure 0UNIT but i want to see if the UNIT for example BX = BOX, something like this is that i want to check, thanks!

If you look at the unit tables, you will see the values and texts. It's in SPRO, not in RSA1. My access is limited on my system here, but the documentation says to go to t-code CUNI. I believe in that tcode you can look at all of the unit equivalencies and what each unit's text is ..... like an ea means each; KG = Kilogram; etc...
I am on an 3.x system, so in SPRO I go to BW CIG=>General Settings=>Check units of measurement.
Brian

How to show the First and Last name of the user instead of user name

Gurus,
We have the full email id of the user as the portal user name. Right now we are using the "Item Attributes - Current User" to show the user name. We don't want to show this anymore. We would like to show the First and Last name of the user on the Portal page. How can i do this. Please post a reply if you have some idea about it.
Thanks
Raj
---------

I believe this is possible using the security APIs. See http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PLSQL/DOC/PLDOC_9026/INDEX.HTML and look for person_info (Returns user information, given a user name)
under wwsec_api
Suggest posting any follow-up questions to the Security forum - http://forums.oracle.com/forums/forum.jsp?forum=6

CS 4 InDesign 6.0.4 How do I get rid of it showing the X and Y's

How do I get rid of it showing the X and Y positions when I move a box or something around? Thank you.

Thank you, I don't know how some of these things are coming up and happening since I upgraded to OS 10.6

How do I show the master and version copy of a pic seperately?

Similar Messages

Maybe you are looking for