How do I size teh group area oin teh mixed signal graph to fit my signal names?
I have a simple mixed signal graph and I have programmed my signal names and they are longer than the width of the existing group pane on the object and I want them to be visible. How can I resize the graph panes after I write the names to the object? I know I can customize the thing, but is there a method or property that I am missing here?
Solved!
Go to Solution.
Attachments:
Untitled 1.vi 12 KB
It looks like this is a known problem. You can change the legend size using a property node for waveform graphs and charts, but not for a mixed signal graph. A good work around would be to mouse-over the grey bar between the legend and the plot area until your cursor changes to the resize tool. You can then size it to be large enough to show the whole legend. This is an issue that is set to be resolved in future versions of LabVIEW.
Applications Engineer
National Instruments
Similar Messages
-
How do I change the number of plot areas in a Mixed Signal Graph
How do I *programatically* change the number of plot areas in a Mixed Signal Graph? I recognize that the developer can choose to add or remove a plot area during edit mode but I want to select between 2 or 3 visible plot areas and scale the plot areas appropriately. Is there a property that tells me how many plot areas (or yscales) there are? I also need a property that I can write to as to set the number of plot areas available.
Aside from manually making too many plot areas and then hiding the unneeded plot areas how can I do this?
JonathanHello,
I don't think that is possible - I searched the property and invoke nodes but didn't find something to do that. This would make a great product suggestion though, which you can submit (it goes directly to R&D) by clicking the word feedback in the bottom left corner of the Contact NI page linked below:
Contact NI:
http://sine.ni.com/apps/utf8/nicc.call_me
Best Regards,
JLS -
I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit
What do you mean a moderator
-
How to define the size of report area and its elements?
How can I define the report area size and its elements? And how can I define that for each printed paper, the details area will repeat horizontally or vertically?
Is there any way to change the measuring units?
Are there any difference between Crystal Reports that is bundled with Visual Studio 2005 to the standalone version that don't allow me doing what I need?
Thanks.Hi Juliano,
I hope this is what you had in mind...
1. File / Page setup: set your paper size, portrait/landscape and margins.
2. Section Expert: the page header &footer sections are 'locked' in that each page will have the space indicated dedicated to these sections; report header & footer - this is the space dedicated on the first and last page of the document. The remaining space available will be used up by the Details section.
I'm not sure how you can get the Details to print verticall vs horizontally - except maybe with cross-tab format.
3. Measuring units: is this for the ruler? This is pulled from your computer settings.
The rest I'm not sure about but I hope this is enough to get you started!
Heather -
How to get the screen groups for the screen field which are on selectionscn
hiiii Experts,
How to know the screen groups for the screen field which are on selection screen.
Thanks and regards,
kasyapNAME PNPABKRS-LOW
GROUP1 SEL
GROUP2 DBS
GROUP3 LOW
GROUP4 180
to get this use this:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
if screen-name CS 'ABKRS'.
BREAK-POINT.
endif.
ENDLOOP. -
How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you
https://discussions.apple.com/message/11994130#11994130
-
My contacts and groups are not duplicated in iCloud but my groups are duplicated on iPhone and iPad. Any ideas on how to remove duplicate groups or why they are duplicating?
Welcome to the Apple Community.
Check that you don't have more than one account in your contacts, such as 'iCloud' and 'On My Phone'. -
I have multiple groups in the cloud. I have checked the group I want to use. the next time I go to my contacts they are all checked, how can I stop this?
Are they coming from one forum (e.g. this one, 'iTunes Store'), or from just one thread ? If one community then what shows at the top right of the screen under the Notifications box for the forum - if it says 'stop email notifications' then click on it.
Stopping emails from these forums : https://discussions.apple.com/docs/DOC-3661 -
I need a sample about how substitution groups are rewrited
Hi
As mentioned in a documentation, substitution groups in 10g are rewritten:
The XML Schema constructs for the XPath expression are rewritable.
XML Schema constructs such as complex types, enumerated values, lists, inherited (derived) types, and substitution groups are rewritten.
Can anybody give me a link to a topic or a blog where this subject is discussed?
I'm very need to.
Thanks
DmitryHi
As mentioned in a documentation, substitution groups in 10g are rewritten:
The XML Schema constructs for the XPath expression are rewritable.
XML Schema constructs such as complex types, enumerated values, lists, inherited (derived) types, and substitution groups are rewritten.
Can anybody give me a link to a topic or a blog where this subject is discussed?
I'm very need to.
Thanks
Dmitry -
How can I import songs which are filed basis one album/compilation as one folder?
How can I import songs which are filed basis one album/compilation as one folder?
i can drag and drop one folder which is a proper album into itunes under playlist. if i drag and drop two proper albums into itunes it is also ok but if itunes does not know my own compliations and i drag and rop my 3000 folders in one shot into itunes i get only one playlist containing all songs.
pleased to hear if anybody know how i can avoid to do 3000 times drag and drop a folder into itunes.
rgds, alexanderBefore you begin the import, edit the properties of the tracks to set the Album Artist to Various Artists and Part of a Compilation to Yes.
For more info. see Grouping tracks into albums.
tt2 -
How can I remove 300 groups from my iCloud Contacts?
My OS X Address Book started out with about 10 groups, but now iCloud.com has about 300 groups.
The replication arose because of a bug in how iCloud handles a mixture of Address Book Cards with both OS X and Windows line terminated Notes (LF vs. CRLF - it helps if you once used a typewriter).
I figured out how to convert Address Book to all LF terminated line feeds and I was able to get iCloud.com working on a different account, but my core account is stuck with 300 groups (some replicated 50 times).
I know how to delete all Cards/Contacts in iCloud.com Contacts, but, unfortunately that doesn't remove Groups. (Groups have an interesting behavior in iCloud, almost as though Apple has a special plan for them.)
I can delete Groups one at a time on iCloud.com, but that's tedious. Unfortunately deleting them on Address Book, and trusting in sync to clear up iCloud.com, is equally tedious.
Has anyone heard of a way to delete all Groups on iCloud or Address Book 6? Perhaps an AppleScript?
Has anyone heard of Apple resetting a corrupt iCloud account to clear out bad data? (I have a clean version of Address Book I can use to restart -- that, by the way, is harder than you'd think. Again because Groups are special).
Advice appreciated. If I get some free time I might take may laptop by the Genius bar and see what they say...I figured this out. In this case I didn't care about my Contacts, I had them elsewhere. My problem was my iCloud acount was "poisoned" with massive replication of 'Groups'. Even after I deleted all the Contacts I still had hundreds of Groups to get rid of. Manual deletion was too tedious.
The answer was a simple AppleScript (I'm on ML on the machine i ran this on, so it's "contacts" rather than Address Book:
tell application "Contacts"
repeat 50 times
set theGroup to group "MyGroupName"
delete theGroup
end repeat
save
end tell
Since I had the same Group Names replicated about 100 times each, I only had to run this about 10 times to clear them all out. When I got to smaller numbers I had to drop the repeat count. I changed the Group name as I went.
Took me about five minutes.
I'm sure an AppleScripter could turn this into a general script for removing all groups all at once. Or could get very clever, and only remove groups that had no contacts (so one could salvage the group/contact relationships).
I didn't need that. My problem has been fixed.
I think sync works a LOT better in ML than Lion btw. iCloud updated very quickly. -
How to re-size project using flash bulider to be the same size in all screens
Hi,
Im develop a chat project using flash bulider, my question is how i make sure that the porject when open from diffrent screens size no change,
becouse after i finish th chat project i publish on website later i discover this problem for example when i access project from screen have size 17 or 21
is work fine but in the same time i access from my notbook that him screen is 14 is not work and seems the project is mixed the webcamera no appear complete also other function dosent appear complete like sharescreen.
can some help guide me to find the way that i access the project whatever screen size is work fine and not mixed od disappear functions.
Thanks,What email are you using?
The easiest way to send pictures is to use Apple's Mail.app that is part of the OS - it DOES NOT require a .Mac account.
If you are using a purely web-based email account, the File>Export method is the easiest. -
How to add a Calender Group in a shared Calender
Hi,
I have an iCal server running.
I have an account "shared calender"
that will be shared between multiple computers.
The server works and all the events entered on one client show up on the other clients upon synch.
But how can I add "calender groups" to this shared iCal ?
When adding a new "calender group" it wll be added to my local account not the shared account....
Googling did not come up with anything useful
Any hints ?
Thanks in advanceThanks for the advice. I am looking in my config.s file and this is what i see..
.section ".text",#alloc,#execinstr
/* 0x0000 7 */ .file "x.c"
.section ".data",#alloc,#write
/* 0x0000 9 */ .global ss_dba_grp
/* 0x0000 10 */ .align 8
.global ss_dba_grp
ss_dba_grp:
/* 0x0000 17 */ .align 8
/* 0x0000 18 */ .xword (.L12+0)
/* 0x0004 24 */ .align 8
/* 0x0004 25 */ .xword (.L13+0)
/* 0x0008 26 */ .type ss_dba_grp,#object
/* 0x0008 27 */ .size ss_dba_grp,16
.section ".rodata1",#alloc
/* 0x0008 13 */ .align 8
.L12:
/* 0x0008 15 */ .ascii "dba\0"
/* 0x0014 20 */ .align 8
.L13:
/* 0x0014 22 */ .ascii "dba\0"
What should i change? -
How do I create a group distribution email list with my contacts?
I have many contacts and need to create email distribution lists with my contacts. It is too difficult to choose each contact with every email. How do I create a group contact list with my contacts on iCloud?
Hello there, swcoxdpm.
The following Knowledge Base article provides information on creating Group Contacts in Mavericks on your Macbook Air:
Mail (Mavericks): Address messages
http://support.apple.com/kb/PH14922
Use a group address
If you regularly send messages to the same group of people, you can save them as a group in Contacts, then use the group address to email them.
Group contacts
The steps to do that, are found here:
Contacts (Mavericks): Group contacts
http://support.apple.com/kb/PH15075
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme. How do I change where appointments are put ?
Or how can I choose where the appointment is put ?
I use the mobileme sync services so the ical calendars that are synced are those in the "[email protected]" group.
Please help !
NickActually you can't drag the appointment to ano calendar - its says "You can’t make changes to this invitation., Only the organiser can change this event"
Also if you double click on the received appointment and open the window the only calendars shown that you can select are the 'on my mac" ones, and not the sync'd ones.
Any ideas welcome !!
Nick
Maybe you are looking for
-
How to fix error 3259 on a mac?
Midway through a download it stopped. When I tried to start the download again, I got error 3259. All my downloads just hang at zero kb and I get error 3259. I didn't change anything that I'm aware of and I tried a few things to no avail. Any fixes?
-
how to print a pdf document
-
Flash QA: How to extracting all URLs in a flash file
As part of performing link validation on web sites, there's no obvious way to enumerate all URLs in all flash files for link validation. Of course I can open each flash file and review the each actions pane, but that is slow-going. How can I do this
-
I'm trying to parse XML being returned from a service but having no luck. I've written a unit test to parse a sample that looks like this: *<?xml version="1.0" encoding="UTF-8"?>* *<ShoppingLists xmlns="http://service.mydomain.com/2011/01" xmlns:i="h
-
Dear All, I have not used this Program (RFUMSV50) earlier. Is it a new addition for Service Tax settings in India? We used to post Service Tax Input to One Intermediary account. Whenever the vendor is paid, we used to transfer the service tax compone