How do I solve my color profile problem?

When I load photoshop cc I get a message 'The monitor profile 'Samsung Natural Color Pro 1.0 ICM' appears to be defective. Please rerun your monitor calibration software'. The monitor is a Samsung Syncmaster 2032BW which worked fine with my previous cs3 version of Photoshop. There doesn't appear to be any updates either for the 2032BW monitor on the Samsung site. Any help or suggestions would be very much appreciated.
Message was edited by: dhubz

I will post some screen shots later.
I have tried the iTunes username and password but it does not accept these.
It is apparently a well known problem in the UK and Apple are also aware of it although they aren't doing much about it - apparently there is to be a 'fix' in the next update? Not sure, in the meantime, I've been unable to connect to my home broadband for 4months!
As I said, none of my other devices, iPod Touch/MacBook/iPad, have this problem. Just the iPhone 5.
Thank you for your comments so far...screen shots to follow later.

Similar Messages

How to solve the Embed Color Profile problem...

Hi Everyone,
This vijay from Chennai. I have one doubt for rectify the Embed color Profile problem, that's is how can i judges whether the file had Embed Color Profile or not. anyone solve this problem.
Thanks in Advance.
-yajiv

I used another profiles name, because I dont have the old one installed anymore, Youll have to be exact about the letters though.
And from a prepress-standpoint Id like to point out that removing the profile as opposed to »Convert to Profile« seems a peculiar practice, though of course Your reasons for doing so may be valid indeed.
You could try:
var myDocument = app.activeDocument;
if (myDocument.colorProfileName == "U.S. Web Coated (SWOP) v2") {
// =======================================================
var idassignProfile = stringIDToTypeID( "assignProfile" );
var desc2 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref1 = new ActionReference();
var idDcmn = charIDToTypeID( "Dcmn" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref1.putEnumerated( idDcmn, idOrdn, idTrgt );
desc2.putReference( idnull, ref1 );
var idmanage = stringIDToTypeID( "manage" );
desc2.putBoolean( idmanage, false );
executeAction( idassignProfile, desc2, DialogModes.NO );
else {

How Can I add a color profile to OS X 10.8.4?

How Can I add a color profile to OS X 10.8.4?
I've tried to locate the color profile folder but it's not availble.

Hello gipseyeyes,
It sounds like you're trying to add a ColorSync Profile to your Mac. I found a few resources that may help.
First, I recommend reviewing the following article:
Mac OS X: How to Create a ColorSync Profile Used By Every Account
http://support.apple.com/kb/TA22329
The note in step 6 from that article is particularly useful for your situation:
Note: You may need to make some of these folders if they do not exist.
Also, the user Library in Mountain Lion is hidden, so you will need to follow these steps to get to "~/Library/ColorSync/Profiles/":
OS X Mountain Lion: What is the Library folder?
The Library folder contains files used by OS X and your apps, including your personal fonts and preferences. The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
You can find the full article here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
Thank you for using Apple Support Communities.
Best,
Sheila M.

Color profile problem after installing CS4

OK.
First, let me post these side-by-side comparisons:
As you can see in Image 1 (the "before," left-side photo in each comparison), the colors and overall appearance are distorted. I've read things about gamma but it's all confusing to me. This is surely a color profile problem, right? The transition among pixels that involve colors of yellow and gray is rocky, grainy, and the flat out color is just wrong. Now this color problem affects pictures when opened in both Photoshop 7.0 and the standard Windows Photo Viewer. Meaning, whenever I open pictures in both PS 7.0 and Windows Photo Viewer (my default viewer), this color problem totally messes up certain photos and really damages my ability to edit. I'm an avid photo editor and it's imperative I have proper color display so that I can accurately edit. Keep in mind that certain pictures do not take on this error. When a photo is generally brighter, the distortion is basically invisible. It's photos that are dark or have dark portions in them that display the distortion.
*Note: I took these before-and-after pictures with my camera, because screencapping would not work, since you all don't have the same color profile issue on your computer. That's the only way I can show you!
HOWEVER, when I open photos in another standard Windows application, "Microsoft Office Picture Manager," the color problem is magically erradicated altogether. It shows photos as I've been seeing them all along, until I installed CS4 about two weeks ago. Before installing CS4, everything was fine and I had been using Photoshop 7 for years and have never had a problem. I'm guessing CS4 messed something up. It had to have. Just FYI, I uninstalled CS4, hoping it would reverse the problem. But still, the color issue persists in PS 7 and in my regular Windows Photo Viewer.
Since images display their true form in Windows Office Picture Manager, I don't think I need to calibrate my screen. Or do I? I've read things about it, and to some people, it's not necessary. Right? Okay. I really hope someone can give some advice! Thank you!
P.S. Here's the original photo. On my screen, it looks distorted when opened in photoshop or opened w/the viewer. However, here on Firefox, it's fine.

You should try to familiarize yourself with the concepts of color management.
It's kind of too in-depth a subject to walk you through from a cold start here... There are a lot of good resources out there to help you get started. For example, in just a few seconds Google turned up this:
http://www.adobepress.com/articles/article.asp?p=1315593
The one thing to remember is this: There is NO quick solution, easy set of defaults, or direct answer to making your setup do what you want without your having to understand color management.
People may tell you to calibrate your monitors, or use a particular color profile as a default, or whatever, and they may have good, solid reasons for telling you those things, but if you don't attempt to get your mind around color management it will always seem as though something isn't working right, or is simply magic, which will be frustrating to you.
Here are some basic questions to ponder:
What image color profile is your image carrying?
Is your monitor a wide-gamut display and do you have a color profile set up for it? What kind of monitor is it?
What version of Windows are you running?
Do you know the difference between a color-managed app and one that is not color-managed?
Which of the apps you're using/showing above are color-managed?
What are your settings in Edit - Color Settings?
Take some time and do some research, get your head around the concepts, and it will all make more sense I promise you.
-Noel

Color profile problem/question.

These two exports of the same file were taken on my spouse's D300s, and are good examples of a profile problem I cannot seem to solve. This is the identical problem I also experience on the Nikon D700 and D3. The following was exported with the "Camera Standard" profile, and notice the yellow sun reflection on the door panels:
The following was exported with a xrite generated lightroom profile. Notice the better overall contrast, but also the horrendous unnatural yellow on the same door:
This difference causes all sorts of distortion in natural animal hair that contains any red-orange. I use these doors because they are such a stark example. Any attempts to correct with the WB will usually result in too much blue elsewhere. Also I have created many test profiles under many light conditions (both manually and from LR), and they all cause this problem in all three cameras. This is not a matter of one bad cameral, or one erroneously created profile.
I have two questions: Does this example show up well enough to see what I am talking about? If so, can anyone speculate as to the problem or solution? Even guesses would be appreciated since I am out of my own, and not expert in this sort of thing. Thanks!

George, thank you for this information. I have a couple of things for you to try and another question. The ColorChecker Passport color patches are small, so I would suggest trying to reshoot a calibration image with the ColorChecker Passport in the center and filling at least 1/3 of the picture width. In the image you provided the ColorChecker Passport is about 1/8 the image width and far left of center. I know, I know, it should not matter, but give it a try. This is what I'm doing to create camera profiles for all three of my camera bodies (Canon 300D, 600D, 5D MKII), and I have not had a single problem with "color matching" using this procedure AND what I will describe next.
Concerning white balance procedure you say:
Using the grey card of the same product placed just outside the subject crop.
I assume you are referring to the large 60% reflectance white balance card on one side of the ColorChecker Passport, but you do not mention how you set white balance. I suggest using the LR white balance eyedropper tool with the smaller 80% reflectance gray scale patch on the ColorChecker Classic target side. This is the 2nd patch from the left bottom in your picture right next to the brightest 90% white patch. Two reasons for doing this! A higher reflectance patch reduces the influence of camera noise in the image with the LR 5 x 5 pixels eyedropper tool. Here's a LR forum post with a heated discussion on these issues (or lack thereof): http://forums.adobe.com/thread/854734?tstart=60 The second purely empirical reason is the "Classic" target side provides me with more accurate white balance than using the larger 60% card. Perhaps this is a defect with my ColorChecker Passport target, but I don't know.
When setting white balance with the LR eyedropper tool I suggest taking at least five (5) samples of the 80% patch. I use the center, TL, TR, BR and BL corner areas of the patch. Do not use any reading that has a large variation from the others. Please remember that the eyedropper tool is sampling a very small 5 x 5 (25 pixels) area, and image noise or a target paint defect can give you a bogus reading. Write down the temp and tint for each of the five (5) readings, add them, and divide by five to get the "average" white balance temp and tint. Enter the temp and tint values manually into the white balance tool. I create a user preset for each profile which contains only the ColorChecker created camera profile and manually adjusted white balance settings.
I would also suggest you check the readings of all six (6) grayscale patches for neutrality (R=G=B) using your new camera profile and white balance settings. I have found in some cases using the 65% reflectance patch (3rd patch in) provides the most neutral “overall” white balance setting for the six (6) patches. This is despite the fact it contains more camera noise than the 80% patch next to it. Again, this observation is purely empirical – I am not writing a scientific thesis! It works for me and hopefully it will get you closer to what you want.
One thing I am going to do tomorrow is borrow a friends color checker to rule out the possibility mine is defective. It doesn't look defective, but the problem is so consistent.
This is a very good idea! Having worked in a manufacturing environment for over 45 years, trust me when I tell you defective product from even the largest company ends up in the consumer’s hands. Please let us know what you find.

Display Calibration Creates Color Profile Problems.

I haven't received any response out of the MBP Display forum and I thought you guys might have better insight anyway because you are dealing with color calibration more often. Here it is:
I used colorsync utility to calibrate my monitor, hoping it would at least get the colors more accurate than they are with the "Color LCD" profile. The Color LCD profile has a bad yellow tinge to it. I went through the process 4 times so I would be able to choose the best profile out of the 4. (Now I can't delete the extra profiles but I guess that is a different topic...) The color accuracy and the gray-tone is MUCH better BUT I have a slight (understatement) saturation problem.
My problem is after using Color Sync, ALL of my REDS are oversaturated and blown out. There is a problem with the blues and greens as well but it isn't as bad. Of course, they look fine in non color managed applications (ie FireFox) but everything else makes my photos look horrible. Even the RAW files straight out of the camera look blown out.
I had, at first edited these files on a PC so they always looked fine but now that I have switched to Mac I have noticed how oversaturated they are in all of its color managed applications. (Safari, preview, and even the desktop.) I thought perhaps that I had just pumped up the contrast and saturation too high on the PC and the color profile was now creating a problem because the color was set for an un-profiled file. BUT after viewing the unaltered .NEF's straight out of my camera, they too are oversaturated.
Now, I have some wallpapers I had downloaded from the web that look the same as before. It is just MY OWN photographs that are oversaturated. Obviously I have chosen the wrong color profile or something is wrong with my workflow. The wallpaper that looks the same doesn't have a profile assigned it when I view-info. It just labels the color space as RGB. All my photos that have problems, have a color profile assigned. I am using sRGB as recommended. There are a few still using Adobe RGB (which is what my camera defaults to) and they have the same oversaturation problem.
Aperture is set to export with an sRGB profile and CS2 uses sRGB as well.
Any advice? What monitor and color management profile's are you guys using?
I can't tell what is right anymore. What should I edit my photos to look good in? The only MONITOR profile that doesn't blow them out is Adobe/Apple RGB, Color LCD, and a few of the other default installed profiles.
I've got a bad case of color vertigo!

sorry uberfoto, did not get what MBP meant at first.
what Jan says about color calibration tool is right....and start again from the RAW.....
i am photographer in the advertisement, reportage, portraits and landscape.
my problem was to get the thinks printed as I saw them on the screen.
here what I have to say on that (part of another discussion):
".... Sorry, but no AppleTFT Display comes close to a hardware calibrated display. Maybe they are semi-professional. I do not say this to insult Apple, ore somebody else, but i say this to sway out the illusion of , " if I just spend more money on the calibration tool and software, I´ll have better prints". It´s just not possible, because the display cant show what is there. A Apple CRT Studio Display is far better in this. I you want to have a flat-screen TFT Display to bring good results, you have to choose one that is able to be hardware calibrated and has a higher lookup table (EIZO, LaCie, QuatoGrafics......)
I use use one professional EIZO CG21" and one semi-prof. EIZO FlexScanL985EX(21") and the diffrence is important between the two.
But i need only one to be Print Proof ready.
Before i was always afraid when i gave the picture file to my client, because of what my pictures look like once it is printed. Now the outcome is right or differs only very little from what I saw on the screen. my calibration tool is EYE ONE. "..
BUT your main problem is how it looks in the web.
my thoughts and suggestion on this:
1. most people see the web on PC Display. those use a gamma of 2.2
(apple = 1.8) so pictures appear more blue with more contrast. this setting is made to hide the low ability of the system and display to show colors as they are and give and give crispy impression. So you will have to consider this when you prepare the pictures for the web. therefor the standard calibration of your MBP is best for your needs. ( for printing the Display has to be set on 5.600 kelvin ,that would be to warm 4 the wwweb).
2.
a) In the beginning I use Aperture 1.5 (or Lightroom) to select and prepare the pictures as I like them.
b) then I export them in 8 bit/300 dpi in the size they will be used as PSD or TIFF.
c) I will then open them in Photoshop (color-settings=web /internet) make the cleaning and so on.( 4 the web I always increase the saturation because sRGB and JPG will throw away lots of colors).
d) AND NOW "save for the web ". This is definitely the best tool to prepare pictures for the web. on the right upper part of the window there is a flash-open menu where you may choose to see the colors like in windows or macintosh system.
and on the lower right of the application-window there is a roll-down menu where you may preview the results in different browsers of your choice.
It is here where you can produce amazing high Q pictures 4 the web under 100 kb.
Hope this may help.
good luck,
larry
G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12" Mac OS X (10.4.2) EIZO CG 21"+EIZO L985ex 21"
G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12" Mac OS X (10.4.2) EIZO CG 21"+EIZO L985ex 21"
G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12" Mac OS X (10.4.2) EIZO CG 21"+EIZO L985ex 21"

Color profile problems and text issues

hello all!
recently, after installing the java update i ran across some permissions problems when doing a permissions repair.
these java permissions seem to be the result of database updates and are fairly innocuous.
however, since then, my color profiles are screwed up. things look horrible. some pictures are fine, some bad. at first i thought it was just safari, but it's system wide. i've tried repairing permissions again but to no effect. i've downloaded the profiles from adobe and copied them into the profiles directory in library. no effect.
some profiles show up twice on the list. when i select, for instance, the second listing, the selection moves to the first listing. do you follow?
when i run the profile first aid this is what i get:
Searching for profiles...
Checking 88 profiles...
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Required tag is not present.
Tag 'B2A1': Required tag is not present.
Tag 'A2B2': Required tag is not present.
Tag 'B2A2': Required tag is not present.
Tag 'gamt': Required tag is not present.
The file is locked. Could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Required tag is not present.
Tag 'B2A1': Required tag is not present.
Tag 'A2B2': Required tag is not present.
Tag 'B2A2': Required tag is not present.
Tag 'gamt': Required tag is not present.
The file is locked. Could not be fixed.
/Library/ColorSync/Profiles/EW-sRGB
Tag 'desc': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EPSON Perfection1250
Tag 'dmnd': Tag size is not correct. Could not be fixed.
Tag 'dmdd': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EPSON Perfection1250 TPU
Tag 'dmnd': Tag size is not correct. Could not be fixed.
Repair done - 0 out of 5 profiles fixed.
any suggestions would be most welcome. possibly help on reverting to the earlier java would be nice..don't know if that'll help but it started back then.
thank you!
cheers,
sean

okay, a boot up into safe mode and everything looks great, the way it should. everything looks awesome in another user account too.
so, it user specific. i've discovered these issues affect safari and not firefox. images in ff look fine.
if there are font or profile issues, how do i go about finding what might be broken in my main user account?
can i just transfer everything to a new user account? what are the steps involved?
thanks again for any help!

How to make custom icc color profile work as default for all users?

Hi!
I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
Is there a specific place I have to put custom icc profile to make it system default?
Thank you!

If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.

Print driver/color profile problems after 2.0 update

Since I updated to the latest version of aperture 2 I have had problems with printing on my canon 5200R printer. The coloring is way off, as if aperture does not seem to recognize the canon print drivers or color profiles. I have read about printing from another program but was so happy with color quality using aperture 1.5, is there a fix for the current problem?

Bump.

How can I solve the Error 110 problem when trying to modify the Description of Properties of PDF?

Hello!
I am trying to modify the Description of the PDF fies but I cannot do for some files because of the Error 110. How can I solve this problem so I can succesfully modify the Description of the Properties of the PDF files?
I also have one more question!
Why is it impossible to modify the Description parts when the File name is missing in the Description? There is a File name on each individual PDFs but some of them have to File names on the Description!
Thank you very much in advance!

Noelia, i have the same problem, did you solved it ?I had the same issue as Noelia when I investigated Noelia's issue originally (see the TwoVideos sample application in this thread: Re: How can I play different videos with only one MediaPlayer?
I tried running the TwoVideos sample application today on Windows XPsp3, JavaFX 2.1b17, JDK7u4ea and I was unable to reproduce the problem, so it is likely fixed either 2.1 or (less likely I believe) a Windows 7 only related issue.
http://www.oracle.com/technetwork/java/javafx/downloads/devpreview-1429449.html
If you can reproduce the issue with the latest developer preview, then log a bug at http://javafx-jira.kenai.com with environment details, steps, sample media and code to reproduce the issue.
Please contact me ainchilc at gmail dot com.If it is an answer to an unanswered question on a public forum, it is best to post the answer on the forum, then everybody who reads the forum will know what the answer is.

How do I load a color profile onto my CS3?

My printer has requested that I work in CYMK, GRACol2006_coated1v2.icc color setting. I can't find it on my list of profiles. My printer has sent me the file. How do I get it into my pull down list?
Thanks in advance.

Profiles need to be added via Windows's color management. Put the profile in C:\Windows\System32\Spool\Driver\Color along where the other profiles are and it should show up as a printer profile. You can also put them in Adobe's color folder C:\Program Files\Common Files\Adobe\Color\Profiles.
Mylenium

Color Profile Problem

Hey, I have a question about color profiles.
If you go to system preferences -> display -> color, and use "Color LCD." Now click on "calibrate," use expert mode, and click continue all the time. does the screen change at all?
Mine seems to become greener, is that a problem?

Hi haginile,
When you start the calibration did you follow the instructions and move the sliders around until the Apple icon in the box looks neutral gray to you before hitting the continue button?
Jrsy
Actually I forgot to mention that you need to adjust both left and right sliders through each of the five calibration steps before continuing to the next step.
Message was edited by: Jrsy Man

X300 color profile problem

Hi. Just got an X300. Like all my laptops and desktops, I do a color calibration using Datavision SpyderPro2 to create a color profile that is near-professional. The calibration runs fine on the X300, and the profile loads at startup which triggers the correct color profile and color balance and it looks great.  But just a few minutes later, magically, the X300 reverts back to the default color profile, essentially ignoring/ejecting the color profile I created with Spyder Pro.
What is the cause of this? Why would the X300 accept, then later on, reject and revert back to the default color profile (which, btw, is waaaaay too blue).
Thanks
Message Edited by JayNYC on 04-26-2008 07:45 PM

i had a hunch you were using vista.
LUT = look-up table.   it's the table used by your video card driver to determine how each color has to render.   by changing values in this table, each color can be made brighter, darker, or shifted in hue.
the way i worked around the vista issue is to set a schedule in task scheduler to run the LUT loader roughly 15~20 seconds after login.   this covers both login after boot and after recovery from sleep.   it's a PITA but is the only workaround i can think to do.
i briefly glanced over the article you've linked above and it sounds like exactly what i went through back in august when i received my T61p and first used vista.   i'm still using vista today and have since decided to live with the added headache with vista's color management interface (or lack thereof).
if all you need to do is remove color cast then seriously consider using the gamma controls in the "color correction" section of the intel GMA control panel.   if your display appears too blue then just knock the brightness down on the blue channel until it looks good to you.   since you aren't doing design work with the X300, this will be a perfectly viable solution.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

PSE 11 - How save image with printer color profile?

I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer? Thanks.

You can print a photo using the correct printer profile for the lab printer. In the print dialog box , go to "Page Option>Color Management" and then choose Color Handling as "Photoshop Managers color". Now click the printer profile dropdown and choose the profile for your lab printer. If you are not able to find the profile for you printer then choose "Printer Manages Color"
To your second question the answer is that you cannot save the image with the correct colors for printing. You can only convert the profile of your image to Adobe RGB which matches gamut of most printer profiles using "Image Menu>Convert Color Profile and choose Adobe RGB.

How do i solve the silverlight installation problems

How do I solve the Sliverlight installation issues on my new Macbook pro?

What exactly is the installation issue?
Uninstall Silverlight: https://www.microsoft.com/getsilverlight/get-started/install/removing-silverligh t-mac.aspx
Reinstall Silverlight: https://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
Sometimes you may need to repair permissions and users permissions on the machine.
See #6 and #11 here
..Step by Step to fix your Mac
If your having trouble with the installation process, it's sort of the same procedure to install Flash
How to install/uninstall Flash, fix problems
Installing software from the web is a bit more difficult than from AppStore.
Microsoft Silverlight should be approved through Gatekeeper, so having to control or right click on the installer to select "Open" to bypass Gatekeeper shouldn't be required.
If this is occuring, like it's saying this app can't be installed as it's not from MacAppStore or a Apple Identified Developer, then it's likely not the real Silverlight but a trojan malware.
Please use the links I've provided to install Silverlight as they are direct to Microsoft.

How do I solve my color profile problem?

Similar Messages

Maybe you are looking for