How do i solve the following problem. By starting up the message appears: could not found CoreFoundation.dll. Windows error 7

By starting up the following message appaers: could not found CoreFoundation.dll.
Windows Error 7
How can I solve this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Similar Messages

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
share to the media browser? I have done this many times before and never got this message. This is very frustrating. Can anyone help me?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

On opening the application PHOTOSHOP CC the following message appears: Could not initialize Photoshop because of a program error

On opening the application Photoshop CC the following message appears Photoshop could not initialize because of a program error

Moving this discussion to the Photoshop General Discussion forum.

How can I up date Abobe Flassh when I get this message: Action list not found?

I've looked every where and have not found an answer--I keep getting the message: Actionlist not found. Therefore I can not up date my Adobe Flash driver. I am using OX 10.8.5, does anyone have a workable solution?

Turn off any Firewall, if you have turned it on.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.   Click Safari in the menubar and select “Quit Safari”.
    Restart computer. Relaunch Safari.

How to reselove mx.messaging.Consumer could not found ?

Hi,
I am new to flex programming. I just tried build using ant and I got this error. I just included rpc.swc in Flex build path but this error didnt get resolved. Can any one tell me what went wrong?
Thanks,
Sat

Can you connect to ANYTHING at all on your network ???
If you get the message that the server could not be found you should wait for a few minutes until the diagnostics launches automatically with the FIVE yellow, green or red balls to indicate ISP, Ethernet & other status reports...
M

AppStore displays permanently an update avaible and there is none really, how can I solve these little problem?

AppStore displays permanently an update avaible and there is none really, how can I solve these little problem?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Sync with iTunes
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
I myself would live with it before doing the following
- Restore to factory settings/new iOS device.

When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.

when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad "/Volumes/Data/MacBook Pro de Carlos.sparsebundle" ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

Try Here > http://pondini.org/TM/Time_Capsule.html
Perhaps P 2 > Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109).

Just wondered if anyone else is experiencing the following problem and knows a solution. I know a few friends who are also having the issue so its obviously something wrong with IOS7. Basically I have an iphone 4 and upgraded to v7 and most recently v7.

Just wondered if anyone else is experiencing the following problem and knows a solution. I know a few friends who are also having the issue so its obviously something wrong with IOS7.
Basically I have an iphone 4 and upgraded to v7 and most recently v7.0.2. When I am on calls the phone started to beep and vibrate and sometimes change the call to speaker. It seems to be that the screen is sometimes active whilst on calls and so my ear is actually pressing the buttons and hitting numbers or changing it to speaker phone. It has also cancelled a call a few times.
This is extremely annoying and makes every call a worry.
Any ideas of how to solve this problem?

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

When I try to activate my home sharing on iTune I get this error message."home sharing could not be activated because an error occurred(-2146762487)" .How can I solve this problem?

When I try to activate my home sharing on iTune I get this error message."home sharing could not be activated because an error occurred(-2146762487)" .How can I solve this problem?

I have a brand new iMac with all the newest updates etc etc, Safari logs me in without any problem but iTunes etc is just not working.. and I have the same message...Any ideas how to resolve this?
"Home Sharing could not be activated because an error occurred (5506)."

How can i solve this replication problem between TT and ORACLE

Hi
I have an application that using AWT cashgroup implement the replication between TT (7.0.6.7) and ORACLE(10g);
but i encounter this problem:
16:16:50.01 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5259: Failed to store Awt runtime information for datastore /abm_wh/abm_bal_ttdata/abm_bal_wh on Oracle.
16:16:50.02 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5107: TT5107: Oracle(OCI) error in OCIStmtExecute(): ORA-08177: can't serialize access for this transaction rc = -1 -- file "bdbStmt.c", lineno 3726, procedure "ttBDbStmtExecute()"
16:16:50.02 Err : REP: 2302682: ABM_BAL_WH:receiver.c(5612): TT16187: Transaction 1316077016/357692526; Error: transient 0, permanent 1
the isolation level of my date store is read-committed ,and the sys.ODBC.INI file is also set Isolation=1(readcommitted mode)
so ,I still wonder how the error ORA-08177!
how can i solve this replication problem?
thank you.

I suspect this is failing on an UPDATE to the tt_03_reppeers table on Oracle. I would guess the TT repagent has to temporarily use serializable isolation when updating this table. Do you have any other datastores with AWT cachegroups propagating into the same Oracle database? Or can you identify if some other process is preventing the repagent from using serializable isolation? If you google ORA-08177 there seem to be ways out there to narrow down what's causing the contention.

Hallo! I have a question to the following problem.

Hallo! I have a question to the following problem. I have to compare data. I get every 10 ms 3 data from a sensor. I must save the last 5 measurements. Compare the data and then I have to make a decision. Can I save the last 5 measurements with a shift register?? How can I save it, because I get continuously the data in the shift register. How can I compare the data when I put them in a cluster, save a cluster every 10ms and the I want to compare them with each other.
I thank you very much for your help!
thomas

If I understand you correctly, you need to operate on the last five data sets from your three sensors.
Simply expand the right shift register to store the data from the last few iterations (see attached image). Since I don't know how you need to compare the data, I have just placed a generic VI that operates on the history data.
(Please attach your VI if you want me to give you a more specific solution.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
processing.gif ‏4 KB

How do i solve the following problem. By starting up the message appears: could not found CoreFoundation.dll. Windows error 7

Similar Messages

Maybe you are looking for