How Do I Solve this Problem when Copying Library from Backup Disks?
I recently had a pc problem that resulted in the repair company having to back up my hard drive (which included my I Tunes Library) onto DVDs.
When trying to upload the ITunes library from the DVD to my new computer (after downloading I Tunes software), about half of my library uploaded fine.
The other half is indicated in my new I Tunes library, but when I click on it it says that such songs "could not be used because the original file could not be found. Would you like to locate it?"
When I attempt to locate it, I cannot find it on the disk. But it must be there, I am guessing, because it loaded, albeit in the inaccessible form, into the new I Tunes library?
When I open the disk in my D drive, I cannot find the songs that will not open; it appears that the people who backed it up, only made it through the "Ds". But again, that is inconsistent with the fact that the inaccessible songs' titles were uploaded to the new I Tunes library.
I am totally stumped. Is there any way to fix this? I am faced with losing half my library.
CAn anyone tell me how to get out of this iphone recovery? thanks!!
Similar Messages
-
How can I solve the problem with copying text from Google Documents?
Ctrl+C and Ctrl+X are not always working in Google Document opened with Mozilla Firefox 30. This problem first occurred 2 days ago. No changes to the software were made.
The problem is not stable and permanent. I can successfully copy several lines from document and paste them somewhere else. And suddenly the next one is not copied using ctrl+c. Even ctrl+x is not working until I change the selection of the lines. Sometimes it begin to work after changing the selection, sometimes not.
I'm using Google Documents for a long time. I always use Firefox to work with them. And I've never had this problem before.This problem happens for me as well. I can copy/paste from Firefox initially, but then after pasting elsewhere the Firefox page has to be refreshed in order to copy something else....
-
When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario -
When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?
mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When I plug my ipod into my computer the computer dosnt read it and I get a messege saying that the device is drawing to much power. How do I solve this problem???
I had the same problem with mine when I connect the ipod when it's full charged and turn on. The problem never happen when the ipod is charging or i'ts full charged and it's turn off. So just turn off your ipod down and connect to your mac again.
-
The problem is when we create and then publish to ibooks review it can not be shown completely. How can I solve this problem?
If you are saying, that you published the book to the iBooks review team and cannot be seem in the store.
Use your iTunes Connect account > Manage your Books to check on its status. It takes time so you need to allow a few days.
If its a problems viewing on your iPad Follow the above advice and another option is is export your book, open iBooks on your Mac and drag the book into iBooks.
You can iTunes > add to libray and sync to your iPad. -
when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off
It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter- -
when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?
Step by step, how did you arrive at seeing this agreement?
-
My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
When you create a link to a web page in numbers "Mavericks" and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text (with Cmd-K) in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem?
Thank you.Hi again Raja!
I did as you recommended and installed HTTPWatch and below is the outcome of that program. It is the exact string with the only exception of obfuscated servernames and portnumbers. The last part that begins with "sap_ep_baseurl=" makes me suspicious, is that part really correct? It looks like it's lacking things.
Best regards
Benny
http://<server:port>/sap/bc/bsp/sap/Z_PURCHASE_REQ/process.htm?
sap-syscmd=nocookie&sap-client=200&sap-language=sv&style_sheet=
http%3A%2F%2F<server>%3A<port>%2Firj%2Fportalapps%2F
com.sap.portal.design.portaldesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2F
controls%2Fcontrols_ie6.css%3F7.0.10.0.0&sap-cssversion=7.0.10.0.0&sap-tray-type
=null&sap-tray-padding=null&sap-accessibility=&sap-ep-version=7.00.200611091758&
sap_ep_version=7.00.200611091758&sap_ep_baseurl=http%3A%2F%2F
<server>%3A<port>%2Firj%2Fportal&matnr=9780198603641 -
When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.
Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith. -
When I enter my photos app(only on my iPad Air), it says my iCloud storage can't update because it's full. In the settings it says I have 1,5 GB storage left. How do I solve this problem?
Welcome to the Apple community.
Could you please clarify what it is that is full, your iPad or your iCloud storage.
Maybe you are looking for
-
P4M890M Intial bootup giving me error message "Bus Processor is not supported"
Barebones Desktop Specs; P4 631 3Ghz HT 2M 800FSB Sock 775 w/Masscool 8W0141B 3.6Gz Cooling Fan MSI P4M890M-L Socket 775 MB w/ 450 watt power - MSI Case w/Extra Cooling Hitachi 250GB EIDE HD w/ HD Cooler XFX GeForce 6200 Turbo Cache 256MB PCIe 2 - Ul
-
How do i share my itunes library across accounts on my Mac mini server?
got the new server for the holidays and I migrated my entire itunes library from my old PC. It was my expectation that the accounts on the server would all have access to the same library, however, that does not appear to be the case. When my son l
-
Problem with Helve font in Adobe forms
Hi Gurus, I am working on an Adobe form.It contains Helve Font size 10 and 14. But I am not able to find Helve Font in the font pallette while creating that form in live cycle designer or in SAP. Is there any option to add fonts? How can I make Hel
-
Getting Receive File Name and status of application from Biztalk database.
Hello all, I want to retrieve Receive file name and status of application (started, partially started) in a stored procedure querying Biztalk databases. Please share if anybody have an Idea. Thanks
-
How to delete standard text in SO10
Hi, We have lot of data in SO10 ,whcih we don't need now. How can we delete it?