How do I sort clips in the Project Assets window by date and time before dragging into the timeline?

I am using Elements 12 and don't seem able to sort clips by time and date (when using clips from different cameras) as we were able to in an earlier version of the program.

Roger A
I will think about it some more to make sure I am not overlooking anything, but, as far as can be determined, your sorting choices in Project Assets are under Sort by, with only two options:
a. File Name (ascending)
b. Duration (ascending)
ATR

Similar Messages

How do I sort clips in the Project panel library (bin) alphabetically by file name?

Two questions: How do I sort clip thumbnails in the Project Panel library (bin) alphabetically by file name?
How do I "select" a group of 25 consecutive clips on the time line to form a group without having to click on each individual clip one at a time. The method in the Help menu about "alt" click does nothing for me.

Sorry, I missed part 2. Unless CS4.2 has added a true "Group" function, like in InDesign, Illustrator, etc., there is not a direct way to keep Selected Clips together. However, you can put them on their own Sequence and then Nest that Sequence with others. This is often done, so that one can apply Effects "globally" to that Nested Sequence. [Note: there is no real Group function in Titler either, but for many operations, one can Select multiple Text Blocks, Shapes, Lines, etc., but there is no way to permanently "hold" that group.]
The Alt-click in the Project Panel, for instance, will allow one to drag all to the Timeline, and the Shift-click (or lasso w/ Cursor) in the Timeline will allow one to apply certain things to that group, but the moment that any other Clip is Selected, that "group," does not exist.
I can see a use for a real Group function, but for things like the application of Effects, one would still need to do the Nesting. Test this out by Selecting just two Clips, and go to apply an Effect - you cannot do that. OTOH, one can apply an Effect to one Clip, Rt-click it and choose Copy, then Select multiple Clips and Rt-click on those, where you would Paste Attributes. Not exactly what I think you are asking about, but the results, with just a few clicks, should be the same.
If I missed your intent and need, let me know where I went wrong.
Good luck,
Hunt

How to rejoin two clips in the timeline in PrE 7?

Hello all. Please excuse this newbisome question, but I've had no luck in figuring it out.
I get one long clip into the timeline and then chop it up a lot (in a musical way that relates to quarter, eighth, sixteenth notes, etc). Often I find that I need to rejoin some of the clips, sometimes quite a bit of time after they've been split (so undo isn't an option).
How can I do this?
PS, this is the first video editing software I've used. I've had PrE for three hours, but have had quite a bit of experience with editing audio in one program or another.
Cheers and thanks for your time.

People, thanks for the quick replies.
I understand that all the clips in the timeline are just instances; the same thing happens in audio software, but that software gives you the opportunity to re-glue clips (they're called regions in Logic) once they've been split.
I'm interested in trying to make a video like this http://www.youtube.com/watch?v=35Y7tr3mBtQ
I can do this sort of thing quite easily with audio, and I think I'm on my way with the video stuff, but being able to re-glue clips would help with handling. I go through the “master clip” looking for beats and little sections that will do the trick. In my current proj, a 1/16th note lasts for four frames, so as you can imagine, I have a lot of 4-frame sub-clips to deal with. I generate each sub-clip from my original master clip after I have dragged it into the timeline from the organizer. I then copy, paste and resize the clips, all in the timeline. I only use the preview window as a way of reminding myself what clip x, y or z sounds like. Maybe I need to investigate the functions of the preview window more. The group option may be a work around as well.
A lot of what I do is “suck and see”. I split off a piece, then listen to it in isolation in the preview window by double-clicking and using 'play from In to Out'. A simple re-glue would be fast and convenient if the clip didn't pass the audition.
Quite possibly I'm using an inefficient method (very new to this). Any advice would be gratefully received.
Cheers,
Mark

How do I lock clips on the timeline?

Hi,
I am compiling music videos, taking the best grabs from 6 to 10 takes of a song which the band played along with the studio recording of the song.
The sound track is therefore the synch mechanism.
I am lining all the takes up above each other in synch with the master audio track.
My problem is that when I make cuts in the various takes the clips all ripple backwards and I have to constantly keep re-synching the clips.
I have used this method previously in Premiere Pro 6 which had a padlock symbol at the left hand end of the tracks which was used to lock or unlock the clips on the timeline.
Is there a control key that will do this for me in Premiere Elements and if not, could you suggest another way to get around this problem?
Thanks,
Nick
PS an unrelated question: Can I run Elements 9 on my laptop? (2 gb Ram, 1.66ghz intel centrino duo). I know that the processor speed is lower than recommended but am wondering if it will just run slowly or not at all.
Cheers

PRE does not have a lock feature. By default it ripple deletes (i.e butts the clips either side of a cut). To override this right-click and select clear or use [Shift]+[Delete].
Personally I think you would find the experience unpleasant running on that laptop, but the best thing to do is to install it and see (your licence allows you to install on two machines providing both are not in use at the same time).
Cheers,
Neale
Insanity is hereditary, you get it from your children

How do I link clips in the timeline so that they move together?

I cannot seem to effectively link my clips together in the timeline and it is causing me multiple problems. First of all, when I want to move a clip from one place to another, the other clips after it are not moving forward to close the gap. I tried grouping the whole lot of clips together but then I cannot move individual clips without ungrouping them. Other problems are occuring as I try to solve this problem; the audio seems to have separated from the video so that if I do move a clip, the associated audio isn't going with it. It's frustrating. Someone can help with this easy problem surely. I've only just started using Premiere CS6 so I am a novice.

Gaps dont automatically close.
Moving multiple clips you can do that in different ways: lassoing, using the track selection tool, shift click and so on.
You might want to start here.
Learn Premiere Pro CS6 | Adobe TV

How do I Nudge clips in the timeline

Hello All,
I relatively new to Pr Pro and I am working on a music Video. I need to sync various clips to the music track. I would like to know is there a key command for nudging clip position in the timeline so that I can more easily get my mouth movements to reflect the words being sung. I know about nudging the time indicator with the arrow keys but I can't find any info on nudging an actual clip forward or backward. Right now I have to go to the highest resolution and move the clip around with the selection tool. One other problem with this is that the clip blacks out in the program monitor when moving it around with the selection tool.
Thank you

Easy to do : Alt + left/right arrow to move one frame. Alt+Shift+ left/right arrow to move 5 frames.
Hmm... unless you changed to these combos from the defaults, those are actually the key combos for sliding a clip. To nudge one frame, you want Alt+, (comma) or Alt+. (period). Add Shift to move 5 frames.
Ultimately, you can make these key combos to be (just about) anything you want. These combos and many more are user customizable under Edit > Keyboard Customization.
EDIT: I should mention that as long as your clip is "free-floating"--in other words, its head and tail are not adjacent to the head or tail of any surrounding clips, the key combo Robert mentioned will work. However, if your target clip abuts one or more clips in the sequence, you'll change the duration of the surrounding clips.
For example, say that your target clip is called "B", and it is 10 frames long. The preceding clip is "A" and is also 10 frames long, and the following clip is "C" and is 10 frames long. If you "nudge" clip B one frame earlier, clip A will now be 9 frames long, because the last outgoing frame will be overlaid by B, but clip C will remain 10 frames long, and a 1 frame gap will be created between B and C.
However, if you "slide" clip B one frame earlier, clip A will again be 9 frames and clip B will remain 10 frames, but clip C will now be 11 frames long with no gap between B and C.
Sliding a clip maintains its duration and its clip in and out points, but changes its timeline in and out points. Nudging does much the same, but it is not "sticky" in the way sliding is, in that it pulls unused frames from adjacent clips into the sequence to fill gaps. Both have their use; it simply depends on the situation to dictate what you actually want to do.

I was wondering how can I find out if there's a conflict on date and time

I have a program written for a local auction house where it allows them to track when there drivers were parking cars (hourly) or going on trips (flat rate). The person who enters the record does so later so she would need to enter the times that they did what. What they're concerned with is someone making a mistake and entering a record for 02:00 to 04:00 and another for 03:00 to 05:00 and having them get paid for 4 hours when it's really 3. So they wanted me to make sure they didn't get double billed. I decided to make it so duplicates can't be entered but I'm wondering how would I write it so if a period exists between the fromDate/fromTime and toDate/toTime I would know?

Convert the dates to seconds since the Epoch with http://java.sun.com/j2se/1.4.2/docs/api/java/util/Date.html#getTime() and check for overlapping intervals.
Harald.
Java Text Crunching: http://www.ebi.ac.uk/Rebholz-srv/whatizit/software

How do I import photos from a memory card that didn't have the date and time set yet?

Aloha,
So I got a new 5dmark 3 and I was shooting a wedding and didn't set the date and time before I started shooting. When I uploaded the images to Lightroom they uploaded all over the place and not in order. Is there a way to upload to lightroom and keep them in order?
THanks so much,
Eric

You can change the sort order to filename. That's what I prefer to use, and it keeps my images in shooting order.

Lost clips after adjusting date and time??

I just updated to iMovie 10.0.3 and adjusted a buch of events in iMovie. All of them were incorrectly placed in wrong years when viewing in "by date" format. After adjusting the date and time with the event highlighted, I come to see either all or some (a clip of two) of the event is lost. The good old "missing file" is what I get in the playback window.
I want to go on an anti-iMovie rant as this version has caused me NOTHING but headaches sence I installed it last year but it's MY fault for not having a spare iMovie 9.0 laying around so I cannot revert.
Is there any solution here besides wiping my iMovie library clean and restoring from TM?
Thanks.
EDIT, I just looked in each event in the file system and the original media is not even there anymore but the library size hasnt changed. Wow. I don't get this at all.

There seems to be a serious bug here that has been introduced with iMovie 10.0.3, and reported by several posters. I would recommend you report it using Apple feedback at: http://www.apple.com/feedback/
There is probably a particular infrequent set of conditions that have to exist for a clip to be deleted after using the adjust time and date function, but I've seen no posts yet that have clarified this. Any further details you have would be worth reporting - for example did you change the date/time to earlier or later? If only some date/time changed clips have disappeared, do they have anything in common, not shared by the clips which havn't disappeared?
You could restore your library from Time machine or, if there are not many lost clips it may be simpler and quicker s to re-import (or drag and drop) the clips from a backup and correct affected projects. (Maybe you can change their date and time before importing them).
As for the library size were the clips big enough to make a visible difference to the library total?
Have you searched for the missing clips by name?
Geoff.

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How do I duplicate a clip from the timeline?

In a sports video I want to duplicate a clip to the project files, then stretch the time of the clip to slow motion, add a title that says " Let's watch that in slow motion" and then insert the slow motion clip after the original clip to make sort-of an instant replay for my grandson. I don't know how to duplicate the clip and put it in "project files" and I'm not sure the best way to make the file a slow motion file. I've looked at the "Help" section but for some reason the blue links there don't function to lead me to the video clips of explanation.

You may be over thinking this. There are easier ways. Jim's way is simple to use.
Or, how about this instead?
Put the clip on the timeline at full speed, then put it on the timeline again, and stretch the time to show it at 25% speed (for example). Put the title over the slower clip and that's it.
This example video shows me putting the video on the timeline, then putting in a title I have already prepared over a copy of the clip held on the last frame, then the same video but set for slow motion using Time Remapping.
If the clip had been longer, I would have eased into the slow motion gradually over the first three seconds or so, but this clip just wasn't long enough for that.

Is there a way to copy & paste a clip from the timeline in one project in to another project?

Hello Popular Premiere Pontificaters,
I am using Premiere 6 on a Windows 7 machine.
Is there a way to copy and paste a clip from the timeline in one project in to another project?... I can copy my clip, but when I open the other project, it will not allow me to paste it in there... but I am able to copy and paste a clip within a single project. I tried everything... pasting in to a new video track and pasting in to an existing video track in the second project, but the paste option simply isn't there when I open the second project.
And if Premiere itself will not allow me to do this in any way, will a copy-paste clipboard type of accessory app allow me to do this?... if so, which is the best, trustworthy copy-paste app that is malware free?
Thanks,
digi

Hi Bill Hunt,
I just read the page that you provided about "Handles"... thanks allot for that ARTICLE. In your article and the subsequent article HANDLES, "Transitions Overview: applying transitions" linked from your article, it indicates (in PrE and PrPro anyway - I'm in Premiere 6) that transitions can be applied to non-Video 1 tracks... the paragraph below is a quote from that "Transitions Overview: applying transitions" article...
"Whatever is below the transition in a Timeline panel appears in the transparent portion of the transition (the portion of the effect that would display frames from the adjacent clip in a two-sided transition). If the clip is on Video 1 or has no clips beneath it, the transparent portions display black. If the clip is on a track above another clip, the lower clip is shown through the transition, making it look like a double-sided transition."
So this indicates that transitions can be applied to non-Video 1 tracks since it is referring to content in tracks beneath a transparent fade that would show through... and only non-Video 1 tracks can be transparent and have other clips "beneath" them in the timeline, right?
In the screenshot sample in your article at this LINK, I see the handles (referred to as B and E) and I can see in my monitor window how those handles would be represented by the two little bracket symbols { } ... you can see how they appear in my monitor window in Premiere 6 in this screenshot, and below, from a different thread that isn't related to this topic.
But I'm still trying to figure out how the handles can be applied in the non-Video 1 tracks in the timeline to insert a transition (cross-dissolve) between two clips.
Can you advise me on this?... I posted a separate thread HERE on this topic, but I haven't got any further with finding an answer.
Thanks so much for your article,
digi

Something happened, now I can't select clips in the timeline of my current project(in Elements 4)

I've been working on a project for a few days now, everything's been fine. Last night while editing, something happened when I was trying to add a transition between two clips. Now I can't select or edit any clips in the timeline anymore, and can't add new ones. When I click on the clips in the timeline, nothing happens. When I try to drag the select box around several of them, same thing. It acts like there's nothing to select. Same thing with right clicks, soundtrack mp3s, etc. The clips ARE still THERE though, and they all play fine in the preview screen in real time, and when I drag the slider back and forth along them.
All the clips are already rendered except the one transition I was adding when this started. When I hit 'Enter' to render, though, it says "Rendering 1 of 6 Audio Previews" instead of the usual x-number of video previews. I've not seen that before so it probably has something to do with all this.
It's ONLY with this one project. I can still edit and select clips in all my other projects as before.
I've already tried loading other projects and then coming back to this one, as well as closing the program and re-opening it. My current project is still stuck like this but the others are fine.
Please keep all this info in mind. This can't have anything to do with codecs or the clips being in the wrong format for the program. They're all regular AVI files and MP3s, I've been selecting and editing every single clip on this timeline dozens of times over the past few days with no problems. I'm just suddenly not able to select or edit them anymore or add anything new to the timeline, but they still play normally as previews.
I'm really hoping this is a simple thing where I've just tripped some setting and accidentally saved it that way and it can be easily changed back.

OK, then all that I suggested here:
Now, Exit from PrE, and Shutdown the computer completely. Wait a few moments, and then do a cold boot, launching PrE and Opening that Save_As Project. Do you now have the ability to edit the Clips on the Timeline?
If not, go to the location where you Copied the AutoSave folder, and view the files with Detail View ON. Then, look at the Date/Time of the files (probably will be 5 of them). Choose the last one written, Open that, and test. If no change, work backwards to the oldest.
If nothing is working, the only thing that comes to my mind would be an issue with the display driver, BUT that should affect all Projects, and not just this one. However, updating the video driver is always a good step, and should not hurt anything.
Note: many MP3's can cause all sorts of problems. I recommend always converting them to PCM/WAV @ 48KHz 16-bit, and replacing MP3's with those WAV files. One can use the great, free audio-editor, Audacity, to convert the MP3's.
If all of the above tests fail, let us know, and if you get any error, or warning messages, copy those down completely, and post those
all failed too?
If so, there is nothing that I can suggest. It seems that your Project is hosed, and is very likely not recoverable.
Sorry,
Hunt

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

I am moving clips to the timeline and they arrive zoomed in. how can I stop this?

need some help. I'm moving clips to the timeline and they arrive zoomed in. I don't want this effect. How can I stop it?

To expand a little on John's questions and link, every clip and every sequence has its own frame dimensions (and pixel aspect ratio & frame rate). By default, Premiere preserves the dimensions (or "resolution") of a clip when you add it to a sequence. That means that if a clip's resolution is greater than that of the sequence, it will appear to be zoomed in on the frame. Conversely, if the clip is lower res than the sequence, it will appear shrunk, with black borders.
If all of your content is the same resolution (which is the ideal case), then you should use a sequence that matches. The easiest way to do so is the "New Item" method that John refers to--dragging a clip to the Project Panel's New Item button--or, in later releases of PPro CC, dragging it into an empty Timeline panel. If you're working with content of mixed resolution, then you have to pick your poison and scale smaller clips up or larger clips down. The latter option is generally preferred because the former--scaling clips up--often results in unacceptable pixelation.

How do I sort clips in the Project Assets window by date and time before dragging into the timeline?

Similar Messages

Maybe you are looking for