How do I sort my phone numbers inside a contact? (using custom labels)

Alright, since I've converted to iCloud, I'm now adding new contacts in there. However... before I was adding phone numbers through Address Book on my Macbook (that ended up creating a conflict with iCloud so I'm now using iCloud). What I want to know is... in address book you can set up a "default template" for your contacts (to include spouses, children, multiple addresses, phone numbers etc) I have created several labels for phone numbers, so I know which carrier they are since most of my contacts have 2-4 cell phones (all different carriers). Anyways, in address book I have for example ATT as the primary one on the list and then example: Verizon, Sprint, Tmobile & last the home phone). I have it set in that way, so even if someone only has ATT & Sprint, ATT will be at the top. Since I switched to iCloud (the carriers are all jumbled around in the contact and the reason I had placed them in a specific order is because I have one or two of those first carriers). Please let me know if you know how to change this in iCloud? Thanks!!!

Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys.

Similar Messages

  • How can I see the phone number that a contact used to call me?

    I have several contacts in the addressbook of my iPhone 4 (iOS 5.0.1) for which I have entered multiple phone numbers. In the call history the names of my contacts are shown, which is fine. To call someone back based on the history  I would like to know which number was used to call me. Is there a way to get to this information?

    It will say "mobile" Home", etc under the name.
    You can also tap the blue arrow and see the highlighted number.
    iPhone User Guide (For iOS 5.0 Software)

  • How do I get just phone numbers on my contacts

    Have a new iphone and want to get my contacts saved but not the email address

    Depends on where you're attempting to get the info from. If you're getting the contacts to sync from Address Book etc then it will pull whatever details are listed within that.
    Alternatively it would be a matter of creating the contacts manually sans email, or syncing and then removing the email after the sync.

  • Question in regards to multiple addresses and phone numbers in one contact...

    Hello iPhone users!
    I have a quick question in regards to contacts. If I have a name of a restaurant that has two separate phone numbers and two separate locations, do I need to create a separate contact for each location and each phone number? For exmaple, let's say the Restaurant name is Luigi's and there is one location in Boston and one in New York. I wish to enter both of the addresses and both of phone numbers.
    Ideally, how would I combine both of these? I think to further qualify is if I'm able to combine both entries into one contact, how can I differentiate the phone numbers? I realize there are labels that I can customize (i.e. name one label Boston and the other New York) but it seems if I do that, then those custom labels appear to carry over for any other new contact I create which is not ideal.
    Am I on the right track or am I over thinking this? Does anyone have any suggestions?
    Many thanks!

    Thanks for your reply!  I'm just trying to figure out the best way. Basically I was hoping to create one contact entity with the restaurant name and withing that contact the following:
    1. Addresses for both locations
    2. Phone numbers for both locations
    3. A label to distinguish which number belongs to what location
    So at the moment, I have one contact and the label for one phone number is "main" which is not ideal because it doesn't distinguish what location the number is calling. Let's say I create a custom label called "Boston". It works fine and I can assign that label to that number. The drawback is that now the custom label "Boston" now appears globally in my custom label list. I guess this is fine with one or two labels but then I can see how this might get out of control with more labels being added. I was hoping a custom label would apply only to that one contact and not be globally available to all other new contacts.
    If I do create a custom label and delete it from my list, it then goes away for the contact that I assigned the label to.
    So given that information, I guess if I don't want the custom label list to get out of control, it's probably best to create a separate contact for each location... i.e.
    1. Luigi's - Boston
    2. Luigi's - New York
    I was just hoping to have everything consolidated into one contact as opposed to creating multiple ones. It seems like that can't be accomplished unless I have a huge list of custom labels in which I probably won't use them to apply to other contacts : )

  • How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers?  Until very recently it did so.  Contacts on my macbook pro does show up this way.  I do have a mobile me account an

    How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers?  Until very recently
    it did so.  Contacts on my macbook pro does show up this way.  I do have a mobile me account and in the past syncing was no problem.  What setting has changed?

    The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format.  When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

  • How do i get my phone numbers back after i restored phone back to new?

    how do i get my phone numbers back after i restored phone back to new?

    Where were you syncing the contacts to, iCloud, the computer and Outlook, an email account? That is where you get them back from.

  • How do I get my phone numbers from my IPhone 4 to IPhone 4S

    how do I get my phone numbers from my IPhone 4 to my new IPhone 4S?

    Contacts are designed to be synced with a supported address book app on your computer, or over the air with an email account that supports it. Not a good idea to depend on an iPhone or any cell phone alone for contacts which can be lost or stolen or damaged beyond repair by being dropped, etc.
    If you are syncing contacts with a supported address book app on your computer, you select the same under the Info tab for your iPhone sync preferences with iTunes followed by a sync.
    If you are syncing contacts over the air with an email account that supports it, create the account with the Mail app on your new iPhone and turn Contacts on for over the air syncing with the account settings on the iPhone.
    Contacts are included with the iPhone's backup. If your iPhone is being backed up with iTunes on your computer, the first time you connect a new iPhone to iTunes on a computer being synced with another iPhone, you are prompted to transfer the backup for the other iPhone or set up the new iPhone as a new iPhone.

  • How do I restore all phone numbers deleted more than 1 week ago?

    How do I restore all phone numbers after they were deleted more than a week ago?

    erin --
    If you've emptied your Mail trash, you can't.

  • HT201328 How can I retrieve phone numbers in my contacts on my Iphone 4S?  Only email addresses are showing up.

    How can I retrieve phone numbers in my contacts? Only email addresses are showing.  This is on my Iphone 4S.  Thanks!

    Phone numbers are on phone only. I haven't been using iCloud to sync with iPad & Mac yet. This morning I started to text & my yahoo acct popped up &'asked for my password. When I entered it, that's when all info disappeared except for email addresses.

  • I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

    I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

    Thanks Eric, but that was already turned on. I just now tried turning it off and on again, no change. Actually, I"m more interested in seeing the names than the pictures. I now only see the phone numbers and generic avatars where pics would be.

  • [Question]how to count the occurance of numbers inside the array

    im just practicing my java skill but i cant get my program work can you give me guys some idea on how to determine a number that occured more than 1 inside the array e.g i have 10 elements and inside of my offset i have
    1,2,5,4,5,6,5,8,9,5
    and what im planning to do is count the occurances of the number who occures more than 1 and for that 5 occur 3 times how my program can know that i use for loop but cant figure out how to filter the occurances of numbers inside
    my offset
    thank's

    Encephalopathic you said put - 1 instead i did - 2
    public class sample
       public static void main(String args[])
          int num[] = {2,2,2};
          int index1, count = 0, find = 0;
          for(index1 = 0; index1 < num.length - 2; index1++)
             for(int index2 = 0; index2 < num.length; index2++)
                if(num[index2]==num[index1])
                  find = num[index2];
                  count++;
             System.out.println("i found " + find + " " + count + " same number inside your offset");
    }output is:
    i found 2 3 same number inside your offset
    but another question is what if i want my program to tell the other number that occur 1 time
    like this:
    i found 1 2 same number inside your offset
    i found 2 0 same number inside your offset
    i found 1 2 same number inside your offset

  • How do I change the order of phone numbers in a contact?

    When I enter phone numbers for a contact on the iPhone, they seem to be stuck in the order they were entered. Is there any way to change the order using the phone interface? I sync with Yahoo Address Book. Will the order be preserved if I change the order there?

    Ditto! I am having the same problem. Anyone?

  • Maximum number of phone numbers in a contact, and how to add them easily...

    1. Does anybody know what the maximum number of phonenumbers you can have in a single contact (iPhone 3G)?
    I have a database of telemarketers numbers that I would like to add under a singel contact, put that contact on a silent ringtone, and that way not hear when these folks try to call me. The database contains over 5000 numbers, so I'm not sure if I can have that many numbers under a single contact...
    2. What's the easiest way to add several numbers to a contact? Is there a program that allows you to add a lot of phone numbers to on contact easily?
    I have tried with Windows Contacts and Outlook, but they seam not to be able to handle more than a few (4-6) numbers per contact, even though manualy adding numbers I have 9 numbers under a "Do nt answer" contact. But adding 5000+ numbers manualy in the iPhone is not an option...

    I don't think you can do it any way but manually as your right outlook has a limit on number of Phone numbers. Does Norway have a do not call register? this would be a simpler way of getting rid of tele-marketers.
    Sorry can't be of more help

  • TS2755 Messaging displays contact phone numbers instead of contact names.

    My Messaging displays contact phone numbers instead of contact names.  This just started happening and I do not recall changing any settings. How do I restore to display contact names again?

    Make sure the numbers are assigned to a contact.

  • TS2755 why is Messages now showing phone numbers instead of contact names.  any ideas?

    why is Messages now showing phone numbers instead of contact names.  any ideas?

    Check to see if you have contacts in your Contacts app. This is something that can happen sometimes, and is usually cured by resetting the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. No data will be lost.

Maybe you are looking for

  • Error message on the menu bar

    since installing 7, we get a very long error message in our menu bar: Uh oh! Error while rendering XUL: Value cannot be null. Parameter name: replacement at Vesdia. Toolbar.Handlers.GenericHandler.RenderInterface(String TemplateLoggedIn, String templ

  • OSX 10.4.7 Workgroup Admin problem from remote computer

    I've set up for test a 10.4 server on a private network. On this server, I've created with Workgroup Admin some accounts for files, mail and web. I've no problem to access nd modify these accounts with the tools installe on the server, but when I try

  • How do I undelete video from camcorder

    I have a faulty sdhc card and all my videos kept erasing when I started filming again. It looks like there is software that can recover it but at a cost of around $50. It seems steep for a few videos. Is there some other way?

  • Security on Field Level

    Hi, Actually We have a requirement to make some of the fields in not modifieble in Customer Master Transaction Code(XD01  and XD02). The Background of this requirement is: We are using MDM for Customer Master data. In this Process Customers are creat

  • Priceing Procedure set up

    I need to set up pricing procedure u2013 I am having condition types as follows Manual price as Base Price ZMPR Premium as surcharge ZPRE-which should affect the tax and also not affecting the tax Customer discount K007- which should affect the tax a