How do I specify that I want no more than x instances of my MDB ?
How do I specify that I want no more than x instances of my MDB ?
After all, I don't want as many MDB instances as messages, what's a queue for then...
Does Max Beans In Free Pool do the trick ?
Thank you.
[att1.html]
Hi Rosalie,
Max Beans in Free Pool is there for this purpose. Note
that MDB concurrency is also limited by the thread pool size,
and that it is often useful to give MDBs their own
thread pool to prevent them from stealing threads from other
applications. See:
http://edocs.bea.com/wls/docs81/ejb/DDreference-ejb-jar.html#dispatch-policy
You will likely find it useful to read through the
JMS Performance Guide if you haven't already done so. The above
information, as well as related info, is included:
http://dev2dev.bea.com/products/wlserver/whitepapers/WL_JMS_Perform_GD.jsp
Tom
Rosalie Mignon wrote:
> How do I specify that I want no more than x instances of my MDB ?
>
> After all, I don't want as many MDB instances as messages, what's a
> queue for then...
>
> Does Max Beans In Free Pool do the trick ?
>
> Thank you.
>
>
>
>
>
>
>
>
>
Similar Messages
-
How we will know that dimension size is more than the fact table size?
how we will know that dimension size is more than the fact table size?
Hi,
Let us assume that we are going to take Division and distribution channel in a dimension and assume we have 20 distinct values for Division in R/3 and 30 Distinct values for Distribution channel .So Maximum, we can get 20 * 30 records in dimension table and we can take rough estimation of records in the cube by observing the raw data in source system.
With rgds,
Anil Kumar Sharma .P -
iMac 7,1. SnowLeopard. 2 printers that printed nothing, or more than ±1/4 from page top.Reinstalled OS. Time Machine BU now allows only latest (faulty) files. ±4series shown, each taking +8 hours to complete. How to reinstall from ‘DEVICES’in ‘iMac’?
You need to get rid of MacKeeper (Zeobit). Do not use their uninstaller, follow the instructions here ...
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
When that is done there does not appear to be a lot wrong if you correct the red ink entries.
The 4Gb is sufficient for Yosemite though 6 or 8 Gb would be better. You may find the download slow so be prepared. -
How to install more than one instances on one machine
Hi ALL,
I want to install more than one instances on one machine, but i am a freshman on SAP field. How and where can i get the related infomation for that? thank you very much !!Hi tieyan,
Glad the information was of some help.
For Windows, there is an older note <a href="http://service.sap.com/sap/support/notes/28392">28392</a> that has some more information. It is important also that the SAP parameter PHYS_MEMSIZE is sized correctly according to note <a href="http://service.sap.com/sap/support/notes/88416">88416</a> (the bottom of the note gives some examples). For example, if there were two central instances and the two Oracle database instances on one host, PHYS_MEMSIZE for both instance profiles (of the central instances) would be 35% of the RAM (1/2 of 70%). In the case of MSSQLSRV 2000, for PHYS_MEMSIZE you would refer to the scenarios of note <a href="http://service.sap.com/sap/support/notes/327494">327494</a>.
If you ever want to thank somebody else for helping in answering a question, the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">Rules of Engagement</a> has a section 'Thank Others by Giving Points' that explains this further.
Regards, Mark -
HT3529 How do I send a text message to more than one phone number at the same time?
How do I send the same text to more than one phone at the same time?
You'll need to see if there's an app in the App Store that does what you want. Search for "Group SMS" or similar.
-
How can I use my iPod nano on more than one computer?
How can I use my iPod nano on more than one computer?
Hi, China6450.
Thank you for visiting Apple Support Communities.
I would recommend setting up Manually manage music. This will only allow music to be synced from the computer to the iPod nano. Here are some helpful articles that will walk you through the process.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/HT1202
Cheers,
Jason H. -
How can i restrict a user not open more than 3 sessions in database
how can i restrict a user not open more than 3 sessions in database.For this i have already create a profile and set CONCURRENT_SESSIONS=3 and assing that profile to user but the problem is there.
You will simply need to use the following parameter in your CREATE PROFILE syntax.
CREATE PROFILE normal_user
LIMIT SESSIONS_PER_USER 2;
but the resource limits set for a profile are enforced only when you enable resource limitation for the associated database.
you could do this either by having an initialization paramater which will invoke as soon as the database starts or try using ALTER SYSTEM command -
What happens if I post a fillable form on a website that is used by more than 500 people (any versio
What happens if I post a fillable form on a website that is used by more than 500 people (any version of Adobe Acrobat) how can I accomplish this legally.
LiveCycle Designer does not figure into this at all. The other enabling software that can allow for unrestricted use is called LiveCycle Reader Extensions. There is a version of this software available through Datalogics (www.datalogics.com) as well that may be more convenient to use.
People often bring up the scenario of making a small change and creating a new form. I don't think this would be valid and use the following as a guideline: If the form is collecting the same data for the same purpose, it's the same form
I got this years ago from some materials for LiveCycle Reader Extensions and it seems reasonable.
Note that Reader 11 can do a lot without the form needing to be enabled, such as saving a filled in form and using template features, but not digital signatures. So if you can get your users to update to Reader 11, you won't need to bother with these restrictions. -
How to build an EVDRE input schedule with more than 3 dimensions?
Hello experts,
can anybody tell me, how to build an EVDRE input schedule with more than 3 dimensions?
How must the parameter configuration (expansion 1, 2, 3, 4) and range configuration (ColKeyRange, RowKeyRange, PageKeyRange) look like? If anybody could post an example, how such an input schedule could look like, I would be very thankful.
Best regards,
StefanWell, posting an example might be quite difficult. But there is no right-or-wrong approach. Since Inputs are made at the lowest or base level members of all dimensions, the key is to determine which dimensions you want in your expansion, to be able to gather the input. Otherwise, you may only need a couple of nested dimensions. But if you open BPC for Excel, open a blank workbook and in any cell type [ =EVDRE() ], then press refresh, the DRE wizard will allow you to select your nested row and columns for the report, and then build a basic report for your foundation.
I personally like to NOT expand my columns, and only nest 2 or 3 row member sets, depending on the details we need for input. SOmetimes, the whole input schedule is without any expansions, and just refreshes based on the CV changes, such as entity, category, time etc.
If you need more details, keep posting what you are trying to accomplish and we will try to help. -
How to find out which sub query returns more than one row
Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
prxm.mbr_idntfr AS "Beneficiary ID",
md.last_name
|| ', '
|| md.first_name AS "Beneficiary Name",
pci.idntfr AS "Tracking No.",
TO_CHAR (TRUNC (req.pa_rqst_date),
'MM/dd/yyyy'
) AS "Request Date",
sts.status_name AS "Status",
req.pa_rqst_sid AS "Request #",
prxm.mbr_sid AS "Mbr_sid",
TO_CHAR
(TRUNC (req.pa_revision_date),
'MM/dd/yyyy'
) AS "Last Updated",
TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
DECODE
((SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
0, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "NPI/ID",
DECODE
((SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT pd.last_name
|| ', '
|| pd.first_name
|| ' '
|| pd.middle_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "Prvdr Name",
TO_CHAR (psd.from_date,
'MM/dd/yyyy'
) AS "Srvc From Date",
TO_CHAR (req.validity_start_date,
'MM/DD/YYYY'
) AS "Due Date",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>Left",
req.pa_mode_type_lkpcd AS "Source",
TO_CHAR (TRUNC (wmdtl.rtng_date),
'MM/dd/yyyy'
) AS "Assigned On",
NVL (wmdtl.assigned_to_user_name,
'Not Assigned'
) AS "Assigned To",
req.org_unit_sid AS "OrgUnitSid",
TO_CHAR
(wmdtl.modified_date,
'MM/dd/yyyy hh24:mi:ss'
) AS "WTRD_MODIFIED_DATE",
TO_CHAR (wmdtl.rtng_date,
'MM/dd/yyyy'
) AS "WTRD_RTNG_DATE",
req.status_cid AS "PA_STATUS_CID",
TO_CHAR (req.modified_date,
'MM/dd/yyyy'
) AS "PA_REQ_MODIFIED_DATE",
prs.state_pa_srvc_type_code
AS "STATE_PA_SRVC_TYPE_CODE",
wmdtl.wm_pa_task_rtng_dtl_sid
AS "WM_TASK_RTNG_DTL_SID",
wmdtl.assigned_to_user_acct_sid
AS "WTRD_Assigned_to_user_acct_sid",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>LeftSort",
wmdtl.assigned_to_org_unit_sid
AS "WTRD_Assigned_to_OrgUntSid",
DECODE
((SELECT COUNT (*)
FROM pa_request_status prs
WHERE prs.pa_rqst_sid = req.pa_rqst_sid
AND prs.status_cid = 5
AND prs.oprtnl_flag = 'I'),
0, 'N',
'Y'
) AS "SHOW_UTILIZATION"
FROM pa_request req,
pa_certification_identifier pci,
status sts,
pa_request_x_member prxm,
wm_pa_task_routing_detail wmdtl,
pa_service_date psd,
org_unit ou,
pa_request_service prs,
pa_request_x_provider_location prxpl,
provider_location pl,
provider_detail pd,
provider p,
mbr_dmgrphc md
WHERE req.oprtnl_flag = 'A'
AND req.status_cid NOT IN
(20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
AND req.org_unit_sid IN
(3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
3101, 3186, 3102, 3187, 3103, 3003, 75000104,
75000108, 2006, 75000103, 75000102, 75000113,
75000111, 75000109, 2001, 2009, 75000105,
75000107, 2004, 2010, 2013, 2014, 2005, 2011,
75000112, 2002, 1001, 2012, 75000106, 2007,
75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
3140, 3056, 3141)
AND req.pa_rqst_sid = prs.pa_rqst_sid
AND prs.oprtnl_flag = 'A'
AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
AND psd.oprtnl_flag = 'A'
AND req.pa_rqst_sid = pci.pa_rqst_sid
AND pci.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxm.pa_rqst_sid
AND prxm.oprtnl_flag = 'A'
AND md.oprtnl_flag = 'A'
AND md.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
AND prxm.mbr_sid = md.mbr_sid
AND ou.org_unit_sid = req.org_unit_sid
AND ou.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
AND pci.pa_rqst_sid = prxm.pa_rqst_sid
AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxpl.pa_prvdr_type_lkpcd = 'RR'
AND prxpl.oprtnl_flag = 'A'
AND req.status_cid = sts.status_cid
AND sts.status_type_cid = 3
AND sts.oprtnl_flag = 'A'
AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
AND p.prvdr_sid = pd.prvdr_sid
AND p.prvdr_sid = pl.prvdr_sid
AND pd.oprtnl_flag = 'A'
AND pd.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
AND wmdtl.subsystem_lkpcd = 'PA'
AND wmdtl.oprtnl_flag = 'A'
AND req.pa_rqst_date > (SYSDATE - 365)
ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
"Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck! -
Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?
Sorry - should have been more specific. As far as I can see, Keynote will only allow me to see the current slide and the next slide on my laptop when I am presenting a slideshow through a projector. But an old version of PowerPoint allowed me to show the current slide....and (adjustable) many more slides ahead (say 10)....so I could simply jump ahead to a 'future' slide and skip several slides in between. Net result being that I was able to matcgh my slides to group discussions rather than stick to a fixed, predetermined slide show.
As much as it pains me, without this facility - PowerPoint (old verson, not current one) is more useful for me! :-(( -
HT201436 How can I listen to a voice mail more than once?
How can I likten to a voice mail more than once?
Don't delete it. Go back into your phone app, tap voicemail then hit play
-
My name is Sabahattin Bodur. I purchased Macbook Air (MBAIR 13.3/2.0/8/512Flash). The price is $ 2,199.00 (total invoice amount is $ 2,338.64). When I check on your website, the price of this merchandise looks as $ 1,199. I feel that I have paid more than it costs.
Please kindly clarify the situation and inform me.
Invoice date : June 27, 2012 12:25 PM
Invoice number : *************
Part number : MD846LL/A
Serial number : C0******F57J
Kind Regards,
Sabahattin Bodur
<Edited by Host>Thank you for reply Ralph. When I check the system summary on my Mac, I find the following info. It looks like system has not been upgraded. I appreciate if you share your opinion with me.
Regards,
Model Name: MacBook Air
Model Identifier: MacBookAir5,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Boot ROM Version: MBA51.00EF.B00
SMC Version (system): 2.5f7
Serial Number (system): C0******57J
Hardware UUID: ****
<Edited By Host> -
How can i get apple tv2 to recognize more than one computer in my house
how can i get apple tv2 to recognize more than one computer in my house, I just got it and can only find one of two computers in my home
Same here. I have 1 ATV2 and 2 computers and each has separate iTunes accounts (mine and my wife's). The ATV menu says "computers" so I presume you can have more than 1 computer on 1 ATV. The big question is how do you set it up?
-
How can i send an email with subject more than 50 char.
Hi
Can you please explain How can i send an email with subject more than 50 char?? I am using Cl_BCS=>SET_MESSAGE_SUBJECT but it is throwing an error " An exception of the type CX_SY_REF_IS_INITIAL has occured which is not caught" .
Regards
AlokTry using the following FM
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = i_mail_data
put_in_outbox = c_x
TABLES
packing_list = i_objpack[]
object_header = i_objhead[]
contents_bin = i_objbin[]
contents_txt = i_objtxt[]
receivers = i_receivers[]
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Regards
Avinash
Edited by: Avinash Jagtap on Dec 2, 2009 7:00 AM
Edited by: Avinash Jagtap on Dec 2, 2009 7:02 AM
Maybe you are looking for
-
Java using GUI's mixed with opengl... needs help...urgent....
guys, i need help.... is anyone there have an idea about opengl...? ill attach 4 files that needs to be enhanced or debug for possible errors. to see the canvas... you should have atleast all the needed lib and jar of opengl in your pc. its urgent, i
-
I just got a new iphone 5c this is my first smart phone. I have an Ipad so thought it would be easy. I downloaded the new software don't know if this changed anything. I have only had phone for 4 days but now the light won't shut off. I have to turn
-
Couldn't get to the login scrn. Circle with slash symbol. S-mode not helpin
System: *PowerMac G4 DDR 1GHz with 1.25GB RAM and Tiger 10.4.10 (or .11 not sure)* At first, I could not get the Mac to get to the login screen i.e. it boots up but the timer symbol thing (you know that clockwise 'loading' icon thingy) keeps cycling
-
Urgent - 'Distribute' Function is reffering to wrong planning area
Dear Consultants I have problem with 'Distribute with Key' function. I am using Actuals cube and Planning cube in my multiplanning area. I like to distribute planned quantity from material level to sales office level. No selections for planning area
-
How to Create EAR File by Ant Script for ADF Application
Hi, I want to deploy my ADF Application by EAR. I refer this blog:- http://jdeveloperfaq.blogspot.com/2010/01/faq-10-how-to-configure-ojdeploy-as-ant.html From this I am able to make WAR file but not EAR file and I want it should be EAR Can anyone su