How do I specify the build number when deploying an iOS application (not version number)

I'm looking for a way to specify the application's build number when deploying an iOS application.
Currently in the -app.xml file, you can specify a version number by using:
<versionNumber>1.0.24</versionNumber>
But when submitting to the iTunes Connect store, I want to be able to submit the new updates as a build change, and not version change to avoid the approval process again.
Can this be done ?
Thanks in advance.
-Daniel

Hi Gig52,
Unfortunately, there is no way for you update/modify/increment the build/version number information from the command line. You will have to set that via the Project Explorer. You could check the box labeled Auto Increment in the Version Information property to have the version number automatically increment each time you build your application.

Similar Messages

How do I specify the file extensions when opening a file in Labview?

When opening a file, the file open dialogue box appears with a drop down box called 'Files of type *.*
I want to only display files of type IPC, and I will create all my files to have this extension.
I have been using this technique in VB for some time, but I cannot find a method of doing this in Labview so far, can anyone help?

Use the function "File Dialog" and wire your type to "pattern label".
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

How can I specify the path in Form Builder 9.0

Hi, everyone,
could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
besides, when I run a form, sometime there will be a warnig:
Please acknowledge message
what's that meaning?
thank you very much for your great help

Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
but, when I open my form, it always suggest me:
FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
have a good weekend :-)

How can we specify the number of decimals to be printed

How can we specify the number of decimals to be printed
such as "%5.2d" in C.
Can anyone help me

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

How do I specify the JRE i wish to use to Run an Application.

Hi Everyone;
Please bear with me if you read this before.
I have installed java 1.3.1 and java 1.4.1 in that order.
The JRE used by default is java 1.4.1
How do I specify the JRE I wish to use to Run an Application from a command prompt.
Example:
Java -something org.jboss.Main
help ??
Stephen

I was a lil embarrassed. I told my supervisor that the installation of java overwrites the JRE and that's that.
My supervisor took 10 minutes and went through it and found java.exe in the System32 file.
The java.exe file is found in guess where "C:/WINNT/System32/" folder how nice. C:/WINNT/System32/ is in the path. Not only that it's the first entry in the path. So when I execute java it is not using java.exe any one of the java files that I got from the java website.
So I don't have any control over the version.
Oh well;
That's life. That's 1 for my supervisor.
Stephen

How to specify the target name while deploying a code in OSB-- Plz Help

Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
Prabhu

Hi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj

How should I specify the JSESSIONID in URL?

Hi, friends.
I've got a client wich I use instead of browser.
Could you please prompt me how should I specify JSESSIONID in url, when connecting to server to use previously created session if I already know the ID?
I tried [my_url]?JSESSIONID=[ID] but in servlet when I call req.getRequestedSessionId() is returns null.

Use a semi-colon
[my_url];JSESSIONID=[ID]?param1=xxx etc ...

How can I specify the attribute AU_SIZE in OUI

Hello,
How can I specify the AU_SIZE when i create the disk group for OCR and Voting disk when i install the GI home.
Basically i want to create the Disk group with AU_SIZE as 4MB when i create it Via OUI.I know I can edit the attributes when i do using ASMCA.But not sure about OUI.
Please can someone guide me ?
Regards
Joe

Hi Joe,
Did you mean that i will need to move the OCR/voting **** to another diskgroup -> drop the one created during installtion -> recrerate the diskgroup with AU_SIZE as desired Yes.. you must move OCR, VOTING and ASM SPFILE to another diskgroup and recreate the diskgroup.
Doc said : Oracle recommends that the allocation unit (AU) size for a disk group be set to 4 megabytes (MB).
I do not see benefits to configure the AU SIZE 4MBytes for diskgroup that will store only Clusterware Files.
The voting files are stored directly on ASM Disk (i.e not use AU SIZE). The OCR File and ASM SPFILE use AU SIZE, but are not frequently accessed (low I/O) and files are too small to configure AU to 4MBytes.
Set AU SIZE makes a difference when you do need high I/O throughput. i.e: Used to Diskgroup that will store Datafiles.
I recommend you read my point of view how to store VOTING Files, OCR and ASM SPFILE on ASM.
Re: 3rd voting disk on nfs share
Regards,
Levi Pereira

How can I open the taps(now) when I open the firefox next time?

How can I open the taps(now) when I open the firefox next time?

There is no way to programitically bring up the dialog window for the timestamp control. I recommend building your own dialog window VI that will work by opening when you want the user to set the time and when it closes, it can programatically update the timestamp control. It will not be as pretty but it will be just as functional.

How do I select the entire text when the focus is moved to one TextBox?

How do I select the entire text when the focus is moved to one TextBox?
There are three TextBoxes. I use <TextBox TabIndex="1"/> to set the order they are selected. When I enter one specific TextBox, I would like to have the entire text selected ... one key stroke removes all of the text in that TextBox.
bhs67

I do it the following way:
1. Override the OnStartup for the application. Use the following code: (VB.NET)
EventManager.RegisterClassHandler(GetType(TextBox), TextBox.GotFocusEvent, New RoutedEventHandler(AddressOf TextBox_GotFocus))
2. In the event handler use this code (again VB.NET)
Private Sub TextBox_GotFocus(ByVal sender As Object, ByVal e As RoutedEventArgs)
_theTextBox = CType(sender, TextBox)
If setFocusTimer IsNot Nothing Then
RemoveHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
End If
setFocusTimer = New DispatcherTimer
setFocusTimer.Interval = TimeSpan.FromMilliseconds(10)
AddHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
setFocusTimer.Start()
End Sub
Private Sub setFocusTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs)
setFocusTimer.Stop()
_theTextBox.SelectAll()
End Sub
What this does is register a handler for every textbox in your application. This will execute when the GotFocus event is raised and will allow you to do whatever (in this case select all) you want. A great way of handling things at the application
level.
Lloyd Sheen

Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

Molnar are you receiving that error during the download or install process? Also which operating system are you using?

How do I specify the build number when deploying an iOS application (not version number)

Similar Messages

Maybe you are looking for