How do I specify the right Y axis for an annotation in cwGraph?

Hi,
I'm useing MS 7.0 under LW/CVI 7.0 on Windows XP.
I have a cwGraph in an ActiveX container with 4 plots on it. I'm using
annotations, but when I specify the coordinates of the cwShape (or
cwCaption) object, it always uses the Y axis
of the first plot. So when I try to put an annotation on the 2nd plot,
the Y coordinate is wrong (since it uses the Y coordinates of the first
plot).
I tried associating plots with the cwAnnotation object but it didn't seem to help.
How could I associate an Y axis with one of these objects?
Thanks in advance,
svk

Hi Phyllis,
The two axes on a bar chart are the Category axis and the Value axis. The category axis consists, generally, of a list of titles. Always text. For this reason, the Chart feature expects the Category axis data to be in a Header Column, usually Column A. (Header columns always default to text format, unless forced to something other than Automatic or Text.)
With your Category titles in Header Column A and your various parts of the value in columns B, C, etc., Select all the data columns and then Insert the Stacked Bar Chart. Your Categories should be properly displayed.
Jerry

Similar Messages

How do I get the right operating system for iPod Touch 1st generation?

I have an iPod Touch 1st generation and am experiencing problems with most of the apps that I´ve downloaded. The error message is "Application not compatible - this application requires the iPhone 4.0 Software update". Can I upgrad the software on my iPod?

You 1G iPod can only go as far as iOS 3.1.3, Sorry. If you want 3.1.3 go here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How can i download the right xdev version for snowboard Leopard ?

Hi,
I want to develop any personal application for my ipad, so I would like to download xdev for snowboard Leopard but the latest version is not the good one.
Can you help me please

Thank you for tour advices, on m'y case I just Want to develop m'y Own application. I do not Want to put it on applestore. Will i have
to pay for that ?

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

HT1443 I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer. How do I find the right item to download?

I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer. How do I find the right item to download?

There is no download; you need to buy a Mac OS X 10.6 DVD.
(83218)

How do I specify the JRE i wish to use to Run an Application.

Hi Everyone;
Please bear with me if you read this before.
I have installed java 1.3.1 and java 1.4.1 in that order.
The JRE used by default is java 1.4.1
How do I specify the JRE I wish to use to Run an Application from a command prompt.
Example:
Java -something org.jboss.Main
help ??
Stephen

I was a lil embarrassed. I told my supervisor that the installation of java overwrites the JRE and that's that.
My supervisor took 10 minutes and went through it and found java.exe in the System32 file.
The java.exe file is found in guess where "C:/WINNT/System32/" folder how nice. C:/WINNT/System32/ is in the path. Not only that it's the first entry in the path. So when I execute java it is not using java.exe any one of the java files that I got from the java website.
So I don't have any control over the version.
Oh well;
That's life. That's 1 for my supervisor.
Stephen

How do i specify the port form where i want to send the mails

i have smtp server which by default has proxy at port 25.So i want to send the mails through some other port.So how can i specify the exact port in the bean(i am using a bean to send email) so that all the mails through that port.my machine is having public ip.so what i do is Properties prop = new Properties();
prop.put("mail.smtp.host",hostname);but how do i specify the port name coz this sends the mail at port 25 by default.

prop.put("mail.smtp.port",portnumber)

After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again

After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again?

no.
you need the update for a mac, not windows.
Product updates

How can I get the right click to work in firefox -- it works in internet explorer

how can I get the right click to work in firefox -- it works in interne

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How can I specify the path in Form Builder 9.0

Hi, everyone,
could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
besides, when I run a form, sometime there will be a warnig:
Please acknowledge message
what's that meaning?
thank you very much for your great help

Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
but, when I open my form, it always suggest me:
FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
have a good weekend :-)

How do I close the right side message view in mail

how do I close the right side message view in mail

Here's how I do that in Yosemite (OS X 10.10) -
Open Mail. Open Mail's Preferences (in the Mail menu in the main menubar). On Mail's Preferences, go to the Viewing tab.
Click (checkmark) the item "Use classic layout". That should change the layout of the window to the old-style over-under arrangement for the mail list and display panes. Then drag the dot in the center divider (the horizontal bar that separates the message list pane from the message display pane) all the way to the bottom of the window so that the bottom pane is closed.
Uncheck the item "Use classic layout". That should result in the 'new' style layout but with only two panes showing - the mailboxes list (if set to show) and the list of messages. The display message window should not be open at this point. If you wish to re-open it, look for a small dot in the right-hand margin of the window, and drag that dot a bit to the left.

How can I know the right component for a transaction?

Hi, I have a question
When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
Thanks in advance
Edited by: María Valdés on Aug 19, 2008 6:25 PM

Hello Maria,
Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
For example, if you are from Quality department, the following can be visible when you press F4.
QM - Quality Management
-- QM-ADB Adobe Forms
-- QM-ADB-PRN Print Forms
For the Print Forms, the component will be QM-ADB-PRN
I hope it helps.
Cheers,
Satish.

How can I specify the attribute AU_SIZE in OUI

Hello,
How can I specify the AU_SIZE when i create the disk group for OCR and Voting disk when i install the GI home.
Basically i want to create the Disk group with AU_SIZE as 4MB when i create it Via OUI.I know I can edit the attributes when i do using ASMCA.But not sure about OUI.
Please can someone guide me ?
Regards
Joe

Hi Joe,
Did you mean that i will need to move the OCR/voting **** to another diskgroup -> drop the one created during installtion -> recrerate the diskgroup with AU_SIZE as desired Yes.. you must move OCR, VOTING and ASM SPFILE to another diskgroup and recreate the diskgroup.
Doc said : Oracle recommends that the allocation unit (AU) size for a disk group be set to 4 megabytes (MB).
I do not see benefits to configure the AU SIZE 4MBytes for diskgroup that will store only Clusterware Files.
The voting files are stored directly on ASM Disk (i.e not use AU SIZE). The OCR File and ASM SPFILE use AU SIZE, but are not frequently accessed (low I/O) and files are too small to configure AU to 4MBytes.
Set AU SIZE makes a difference when you do need high I/O throughput. i.e: Used to Diskgroup that will store Datafiles.
I recommend you read my point of view how to store VOTING Files, OCR and ASM SPFILE on ASM.
Re: 3rd voting disk on nfs share
Regards,
Levi Pereira

I downloaded microsoft office to my MBP and my question is how do i get the right file or operating system to open it and so that i can use it?

i downloaded microsoft office to my MBP and my question is how do i get the right file or operating system to open it and so that i can use it?

Welcome to the Apple Support Communities
There are two Office versions: Office for Windows, and Office for Mac.
I suspect that you have downloaded Office for Windows, and you can use it if you install Windows, but a cheaper and easiest way to use Office is to use Office for Mac, so you won't have to install Windows. See > http://www.microsoft.com/mac

How do I specify the right Y axis for an annotation in cwGraph?

Similar Messages

Maybe you are looking for