How do I specify time of day as a smart collection criteria?

This seems like an unlikely omission but I cannot find it in the criteria list. "Date" only appears to deal with date, and that is where I would expect to find a capture time criteria. I have a need to separate two events in one day by their time of ocurrance (E.g. before/after 2pm).

There's a reason you can't find it.
It's not a feature of Lightroom.
If this is a one-time only thing where you need to separate two events before/after 2pm, just give each event its own keyword. Problem solved.

Similar Messages

How do I add or delete photos from a SMART collection?

In LR3 I recently created a Smart Collection from color flagged photos. Now I want to add a few, and delete a few. How?? The obvious method are not allowed with SMART Collections..... Thanks for any input -

Hi,
If you select ALL images that are in your Smart Selection that you wish to keep in a collection, then create a new 'Non-Smart' Collection, all the selected photographs are automatically added to your new Collection (well, they are in LR 3.3RC on Windows 7). You can then delete the 'Smart' collection, and add / delete photos to your new collection as you wish.

How do I see the time of day a call was received on 4S?

Can anyone tell me how to see the time of day a phone call was received or sent on the IPhone 4S?

Phone>Recents...tap the "Blue" chevron.

Launchd plist xml to run job several times a day?

I've been reading about using launchd instead of cron.
For the life of me I can't find out how to run a script at 10AM and 2PM
Can you use:
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>10</integer>
<key>Hour</key>
<integer>14</integer>
or maybe
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>10</integer>
<integer>14</integer>
Maybe I need 2 plists?
If I wanted to run it every X minutes, I can program that into the XML but I don't know how you could do several specified times a day... or for that matter just on Monday and Friday?
I've Googled all night and can't find an example. What is the trick... if there IS a trick?
Thanks,
Al

In Apple's system-lingo: "A daemon is a program that runs in the background as part of the overall system (that is, it is not tied to a particular user). A daemon cannot display any GUI; more specifically, it is not allowed to connect to the window server." (see Tech Note 2083) It doesn't have to be a continuously running program, just one that doesn't interact with users directly. Your script will probably work in either location, mind you, so the distinction might be academic.
All enabled plists are loaded at restart or login. Enabled plists are plists in one of the three user-accessible launchd folders (already mentioned) which are not explicitly disabled by a Disabled key set to true (it's actually a little more complicated than that - the Disabled key in the plist is 'advisory', and the system stores the real enabled list in an undisclosed location - but it usually works). You only need to use launchctl if you are manually updating a plist and don't want to log out, or sometimes in super-tricky cases where you want to programmatically load a plist (in those cases you set the plist's Disabled key to true so it doesn't load, and then script launchctl to load it by override the Disabled key with the -F or -w options. probably TMI). it is set-it-and-forget-it.
There's no simple utility for this, I think, because not that many people use launchd directly, and those few who do tend to write plists, toss them in the correct folder, and forget about them. I have a applescript I use for loading and reloading plists which I keep in the script menu:
on run
          tell application "Finder" to set theItems to the selection as alias list
relaunchd(theItems)
end run
to relaunchd(theItems)
          repeat with thisPlistFile in theItems
                    tell application "Finder" to set containerName to displayed name of container of thisPlistFile
                    if containerName is in {"LaunchAgents", "LaunchDaemons"} then
                              set thePath to quoted form of (POSIX path of thisPlistFile)
                              do shell script "launchctl unload " & thePath
                              do shell script "launchctl load " & thePath
                    end if
          end repeat
end relaunchd
The difference between launchd and cron is that cron is (pardon me for putting it this way) a unix-geek tool: its language is highly compressed and symbolic. good for fast typing in a command-line environment, bad because a single mistyped character can become a major headache to diagnose and fix. Launchd (like many things Apple) is much more verbose and 'natural language'-like, which means a lot more typing but a generally more user-friendly experience (once you wrap your head around it). tradeoffs vs. tradeoffs.

Update Podcasts at a certain time of day

My ISP limits bandwidth during certain times of the day, and if I exceed a quota during the restricted hours, my connection speed is lowered. Is there a way to set iTunes to check for podcast updates / purchases at a user specified time of day?

I'm looking for the solution to this issue too. Once or twice, a full system restart has seemed to solve the problem temporarily but it slips back to an afternoon refresh after a few days.
Seems like it would be simple for Apple to allow us to specify a time of day for refreshes in the preferences section.

Incorrect time of day on iPhone 3G

Anyone else notice how the 3G's time of day does not sync correctly with the computer?
Mine is always off by a few minutes even after trying to set in manually. I cannot find a setting anywhere that allows one to sync the times.
Some have mentioned that the provider needs to offer this. However, my iPod touch always synced the time to the computer. Just seems strange that this was forgotten with the 3G.
Did anyone find a solution to this yet?

Thanks very much for the feedback.
I know that iPod just syncs with the computer and I was thinking that the iPhone would too since the computer is syncing with Apple Europe (time.euro.apple.com)
Unfortunately, there is not a setting under date & time on the iPhone where I can even choose whether to autoselect or not. Maybe it is not supported by T-Mobile.
I can manually set the time and sync it pretty close to the desktop time but within a day, they are off by a minute.
Just curious how to get the time to sync up if it's possible.

How to schedule a concurrent request to run at a specified time/day?

Hi All,
How to schedule a concurrent request to run at a specified time/day (ex: Sunday 12pm)?
Thanks,
Chiru
Message was edited by:
Megastar_Chiru

Is this to run periodically ?
During the request submission, click schedule, choose the specific days, and click on S = Sunday.
Change the start date on the date of the sunday you want to run, eg : 15-JUL-07 14:00:00, change the end date as well.

How many mails i can send at a time per day using APEX mail system?

HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
Gowthami

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

How can I disarm the counter in a specified time?

I am using 6602 counter. I use 2 counters to perform "Buffered Period Measurement ". I use internal time base (20MHz) as the SOURCE, and wire the signal to the Gate. The counters are triggered by a trigger signal.
Now I just want to stop counting the signal in a specified time after the counters triggered. After that time, even the input signal is still running,the counting must be stopped. How can I implement this purpose? I don't know how to disarm the counter when the counter are still running, and how to exactly determinate the stop time.
Thanks for any advise. I have attach my present routine here.
Attachments:
counters.vi ‏192 KB

Just to expand a bit on Justin's answer to outline a few particulars.
You mentioned using 2 counters to capture buffered periods so I'm assuming that you'll enable triggering to guarantee that they both have the same start time. Note that in this scheme, element #0 of your array of buffered periods will represent the time from the Trigger edge until the first Gate edge.
Since your description made it sound acceptable to ignore pulse periods occurring later than the interval of interest, perhaps you can collect data for a little longer than necessary, then reset the counters and trim off the periods that came in "too late" using 'Array Subset.' A quick-and-dirty way is to loop over each array of periods, performing a cumulative sum until it exceeds the specified data collection time interval. That'll tell you the length of the subset you need to keep.
The hard part is that after starting the measurement, you'll need to poll task attributes/properties to determine when the trigger has been received. Only after that's been determined would you start keeping track of approximate time in software.
There are ways to do the timing in hardware if you get more of the 6602's counters involved. Here's one way:
1. First configure your 2 counters for buffered period measurement. However, instead of using the internal timebase for a Source, use another counter's output as a Source. Under DAQmx, the internal routing details are handled for you; under traditional NI-DAQ, you'll need to make explicit routing via RTSI.
Note that in this scheme, these 2 counters don't need to be triggered.
2. Next, generate a finite-duration pulse train at 20 MHz (examples can be readily found under LabVIEW help or this website). This pulse train should last for your data collection time interval, and will act as the Source signal for your period measurements. It is important that the period-measuring counters are started before the finite pulse train.
The finite pulse train uses 2 counters -- one to generate the output pulse train at 20 MHz and a "helper" that produces a single pulse whose duration equals your data collection interval time.
If you need to synchronize to some external trigger signal, you can set the "helper" counter to be triggered, but there'll be one subtle catch. The first period measurement in your buffers will not include the time from the external trigger signal until the beginning of the single "helper" pulse, i.e., the "delay" time spec for the pulse. You can either make this very very short and ignore it, or make it any convenient duration and then add it to the first period measurements. Be careful though: the timebase for this "delay" time isn't necessarily the same as the timebase used to measure periods.
There's quite a bit of complication there, so let me suggest an easier way that assumes no need to synchronize to an external trigger. (I'll use DAQmx terminology, since the traditional NI-DAQ would get complicated again with explicit RTSI signal routing.)
A. As describe in #1 above, configure your period-measuring counters to use a 3rd counter's output as the timing source terminal.
B. After starting your 2 period-measuring counters, start up the 3rd counter to generate a continuous 20 MHz pulse train.
C. After the 3rd counter starts, call the 'Wait (ms)' function from the Time & Dialog palette. Wait for slightly longer than your desired collection time.
D. Read all buffered periods from the counters. You may need to first query each to find out how many are waiting to be read.
E. Reset all 3 counters.
F. Do the cumulative sum work on the two buffered period arrays to determine where each should be truncated.
Note that step "C" above will leave you stuck while data is being collected. A small variation would be to read a reference time ("Tick Count (ms)") right after starting your 20 MHz counter, then set up a loop that allows you to terminate early (logical OR of, say, "abort" button, data acq error cluster error, and time comparison). In that loop, you put a delay of maybe 50-200 msec using "Wait (ms)."
"Wait (ms)" will output a tick count from which you subtract the reference time. When the difference exceeds your data collection time, you can exit the loop and continue with step D above.
-Kevin P.

How to Set Automatic to turn on and off at specified time my TV with STB

It seems very frustrating talking with Verizon tech support, that's why I turn to you guys to find if anyone knows the answer to my question above.,from my experience calling verizon for my tech support regarding fiosTV and most of my experience from Verizon are either inept and giving the customer the run around by keeping you on hold for the longest and not having the answer after all the time I spend with the tech on the phone or they will tell you that the that there is no such thing; and when you call again when you get another tech on the phone you get completely different answer if not an inept answer.
My Specific question is, if I turned off my STB (top box) and my TV at a particular time; and I like my TV with STB to turn on at a specified time ( example I turned off my STB and TV at 9:00 PM ) and would like my TV with the STB to be turn on like 11:00 PM to turn off at 12:00 midnight by itself, not to record but just to turn on as reminder and to serve as power saver incase I fall asleep ( this is just example scenario). How would I do that? The manual of either remote control or the STB does not provide that information. My television manual say the TV can but I can not turn it on automatically with the STB connected.
I called Verizon tech, he first sounded inept and sounded like he just talking from a scripted lines, and would not tell me straight forward that he does not know the answer; I explained that I switched to Verizon Fios for its claim in high and advance technology as they compare themselves by far higher in technology as compared with Cable or direct TV, and with Cable Vision I was able to used the above automatic turn on and off with the remote; I asked for his supervisor or maybe more expert tech support, He turned over the call to his supervisor, who told me that the STB or the remote Fios TV does not have that level of capability which sounded to me like a joke, he also told me that the STB can not be turn on and off because STB is always set as on; I told him I can see the green light turns on and off on the STB each time I press the ON button on the Verizon Remote; he defended that its always on because the timer is ON, and he told me instead FIOSTV has another feature that although it will not turn the feature on and off automatically, it will serve as reminder, I asked him How to carry out that function, the tech supervisor said to me to just press the record button on my remote, which I know right away that it will just record, and I told him that its not what I want to accomplish, this Tech Supervisor insisted that it will not record but will set to notify me, but surely it did record and it just wasted and used my DVR memory capacity the time when he put me on hold for a long period of time, I knew it recorded because the red button on the STB/TVR was on., and it did not notify me in anyway what time the TV and STB will turn on. That was a complete waste of time, instead of him getting the issue to higher level of their tech support and try to research thru and get back to the client. To me, simple feature as this, is such absurd to claim that fiosTV has more advance features than others, where infact they can not even have their tech support answer such simple question.
Any one here has any idea, please help.

The set top box does not offer any auto on or auto off feature.
you can only do that if your TV offers the feature.
If neither your TV nor the STB offer that feature (in this case the stb does not offer) then you can go to a radio shack or a similiar store and purchase a AC timer. they make them and you plug them into your wall, they are very cheap.
I have had directv and fios and neither of my systems did an automatic on or off.
BUT my samsung TV upstairs does have that feature (auto on and off) and I have not checked my mitsubishi downstairs.
so you may want to check your settings on your TV to see if it will do it, like my samsung does.

How can I set iTunes to check for new podcasts at a specific time of day?

Hi guys,
Anybody know a work around for this? I thought it was just a matter of clicking the refresh button at the time I want iTunes to look for new podcasts, but it doesn't seem to be the case...
I want iTunes to look for new podcasts at 2 am every day. So, at 2 am, I clicked the refresh button in the Podcasts section in iTunes. It would then say, in the settings, that iTunes last checked for podcasts at 2 am and will look again at 2 am the next day. Awesome, not. Every single time I try this, iTunes always resets itself and decides to look for podcasts at 2:49 pm. I can't work it out.
So, if anyone has a solution, I would love to hear it! I'm on the latest version. 9.0.2. Thanks for reading.
Regards,
Daniel

I'm looking for the solution to this issue too. Once or twice, a full system restart has seemed to solve the problem temporarily but it slips back to an afternoon refresh after a few days.
Seems like it would be simple for Apple to allow us to specify a time of day for refreshes in the preferences section.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

How do I schedule an automator script to run at a certain time every day?

How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli

Kenoli Oleari1 wrote:
How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli
You can use lauchd to run the script.
Here's an example of an Automator App that I have scheduled to run at 7am daily:
You would save this as com.yourname.plist and put it the the Folder: ~/Library/LaunchAgents/ (then log out and back in, or reboot)
(To run a workflow, change open to automator)
(A nice GUI launchd editor is Lingon)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>com.tonyt.EventReport</string>
          <key>ProgramArguments</key>
          <array>
                    <string>open</string>
                    <string>/Users/Tony/Library/Scripts/Events Report.app</string>
          </array>
          <key>StartCalendarInterval</key>
          <dict>
                    <key>Hour</key>
                    <integer>7</integer>
                    <key>Minute</key>
                    <integer>0</integer>
          </dict>
</dict>
</plist>

Hello THIS IS RAZA I GOT A MACBOOK PRO I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks Screen Shot 2015-03-21 at 10.

Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks

This is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php

How can I execute a method on a specified time?

How can I execute a method on a specified time such as method1() will be executed on 1:00 p.m and the method2() will be executed in 1:00 a.m?

BilgeTonyukuk99 wrote:
How can I execute a method on a specified time such as method1() will be executed on 1:00 p.m and the method2() will be executed in 1:00 a.m?As a simple example, take a look at http://www.javapractices.com/topic/TopicAction.do?Id=54.
As an alternative (and looks like better approach), you could use the ScheduledThreadPoolExecutor.

How do I specify time of day as a smart collection criteria?

Similar Messages

Maybe you are looking for