How do I split 1 image across 2 pages? Am using Pages `08.

When formatting a magazine - how do I split one image across 2 pages side by side?

You can't with a single image, but you can "fake" it. Duplicate the image & then line up the two halves. It's easier if you are viewing facing pages two-up.

Similar Messages

  • How do I spread one image across 2 pages?

    How do I spread one image across 2 pages?

    You can't with a single image, but you can "fake" it. Duplicate the image & then line up the two halves. It's easier if you are viewing facing pages two-up.

  • How do you Spread an Image across multiple pages and print?

    I'm trying to create a large poster to be put on a bulletin board. I've mangaed to spread the image across multiple pages but I can't figure how to be able to print the pages have the edges line up successfully after cropping. I've been playing with the bleed settings but can't figure it out. Here a shot of what im working with:
    Im working in CS3 on Mac OS X

    Create your InDesign document at your final size and when you print it out put a check mark in the box for Tile

  • Need to select and move images across multiple pages...

    Hi,
    I am using Indesign CS2 on a Windows machine and have a 25 page document with 4-up photos (4"X6") on individual pages. I used the ImageCatalog javascript to load these images so I don't seem to have any control from the Master page. I would like to group and move these images to a different location on their own pages.
    Do you know how to select these images across multiple pages? Or can a simple script be written to process this task?
    Thanks in advance for your help.
    -Greg

    Hi Greg,
    A script can certainly do what you want to do--but you have to be a bit more specific. Do you want to move them to different pages in some predefined way, or do you just want to adjust them a bit on the pages they're already on?
    Thanks,
    Ole

  • How can i upload a image file to server by using jsp or servlet.

    Hi,
    I m gurumoorthy. how can i upload a image file to server by using jsp or servlet without using third party API. pls anyone send me atleast outline of the source code.
    Pls send me anyone.
    Regards,
    Gurumoorthy.

    I'm not an applet programmer so I can't give you much advice there.
    If you want to stream the file from the server before it's entirely uploaded, then I don't believe you can treat it like a normal file. If you're just wanting to throw it up there and then listen to it, then you can treat it like a normal file.
    But again, I'm not entirely certain. You might be able to stream the start of the file from the server while you're still uploading the end of it, but it probably depends on what method you're using to do the transfer.

  • How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    Hi Peru Bob,
    I've tried two images, the results were:
    Image 1
    Jpg, original file size 923KB, dimensions 848px x 279px.
    After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
    Image 2
    Jpg, original file size 809KB, dimensions 1200px x 1800px.
    After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
    So, there seems to be a fair file size loss - is this to be expected?

  • How do you insert an image into a google map using a macbook?

    I am trying to put images into a Google map using my MacBook, but cannot seem to find any help. How do I insert an image into my Google map using my MacBook?

    Nothing complicated with your menu - very clear "ADD Image" but my menus are not as simple. Everytime I need to add an image I spend 5-10 minutes searching again. Wonder why so hard. I generally find Acrobat menus cryptic and unclear and I am big Adobe fan - use Illustrator, Photoshop, Dreamweaver, Premier, Fireworks etc - but Acrobat menus are like calculus in the dark.

  • How can I split a pdf file into smaller files using Acrobat XI

    How can I split a pdf file into smaller files using Acrobat XI?

    Hi laforcej
    Open the PDF In Acrobat ...
    Go to Tools -> Pages -> Extract
    Now Select the Page Number you Want to Extract and Save them

  • How can we split the image when its added dynamically ?

    Hi Experts,
    I have an image where i'm calling a DAL in Entry tab Data section under section level properties.As you know that will execute during Entry process.In that DAL i'm Adding an image based on the user choice during entry.
    When image added that should be accomedate the spaces availale in the form.First half of the section can accomedate in the first page and secound half will go to next page.
    I have used CANSPLITIMAGE rule,but that is not get executed during entry process.
    Can someone help me How to split the image during entry process when its added dynamically ?
    Thanks,
    RAMAN C.

    Aside from what you might think of as the origin placement, Gendata rules are not run during Entry operations. As such, you are not able to do what you describe in versions before 12.2. Starting in 12.2, you still can't execute Gendata rules, however there is a newly supported feature when DAL adds a section that will look for the existence of the CanSplitImage rule and assigns an internal attribute that will allow the section to split during entry. This isn't the same as running the rule, but the net effect should be acceptable. (At some point in the future, perhaps this internal attribute will become something you can just set when adding the section on the form and you won't have to specify the CanSplitImage rule at all - for Batch or Entry. That would be great.) In the meantime, if you are not using 12.2, your only option is to break your section up into smaller section components and add them separately. That should help minimize unused space on the page when something doesn't fit.

  • I know it is possible as E O Wilson's - Life  On Earth displays it, but how do you place images across multiple pages in iBook Author?

    I have a large image that I would like to span across 2 or possibly more pages in iBook Author. I know that it is possible as you can see it in the above mentioned E O Wilson's Life On Earth. However at the moment when I place an image in the position required it simply displays it on one of the pages. Any help with this issue would be greatfully recieved.

    You'd need to split the image into two, then place the left 1/2 on one page and the right 1/2 on the next, side-by-side.
    Disable Portrait orientation for the book via the Inspector.

  • How to print large image across several pages?

    After using Appleworks for years I finally got Pages 09. In AW I used to be able to use drawing app to print large (36 x 36) images over several pieces of paper, simply by adding pages to the document. I would then tape the pages together to form the large poster. I can't see anyway to do this in Pages. It won't let you print any larger than 11x17, nor let you add pages to a layout to print a large image. Anybody know how to do this, or did I just waste my money?

    Welcome to Apple Discussions
    Yvan Koenig discovered with iWork '08 that you can span images across pages in a Numbers document as a substitute. Select & delete any tables & then treat the Numbers document as a draw document. You shouldn't need to add pages like in AppleWorks as Numbers adds them as needed to display all of the content.

  • Image across 2 page spread?

    Is it possible to get an image to spread across 2 pages wide without having to split it in half manually and import two seperate images?
    I can not for the life of my find any way to do this
    thanks for any tips

    There is no need for a "hack" or other editing to make 2 halves. Since the photo will "disappear" off of the page, all you need to do is insert the image twice or duplicate it & then line up the photo on two side by side pages. Use the pop-up at the bottom left of the document & choose two-up. You could also mask one half on one page & the other half on the other page.
    I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

  • Spread image across two pages and print the full pages

    Hi there,
    Im having a bit of trouble with InDesign CS3.
    I want to place an image across two facing pages but can't seem to make it go further than one page.
    Also I want to figure out how to print full pages, currently I am only able to print what is contained in the pruple bounding box on the page, any part of the image outwith this is cropped off leaving a white border on the page - this isn't an issue for all but my title page and this two page image I require.
    Any tips.
    Cheers
    malc

    I don't understand the inability to place an image that spans two pages (not that I necessarily think this is a good thing to do under most circumstances, but that's a different discussion). Can you see both pages in the same spread? How about providing some details about what you are doing, and maybe a screen shot showing what's happening. Perhaps you're using a frame on the master page?
    The second part sounds like a printer issue, but that's hard to know without knowing what your "purple" guides (presumably the page margins) are set to. Most printers are not able to print to the edge of the sheet of paper, regardless of what might be included on the page, so you get a white border that will vary in size depending on the printer model. Generally speaking, to print a bleed you must extend the items beyond the page edge (to insure there is no white edge left fom misaligment in the cutter) and print on a larger sheet, then trim to finished size.

  • How do I split a table over two pages in Pages?

    Hi
    I'm trying to split a table in Pages so that the text in the two adjacent rows will fall on two separate pages but I cannot find a way to do this. This was something that is easy to do if using MS Word so I can't believe it would be a feature missing from Pages?
    The document I'm working with is my resume and I had my jobs nicely formatted in a long table so it was easy to work with (job title, dates, achievements etc. in different cells). Since updating to Yosemite and Pages 5.5 I've noticed that I now have my career summary and 'Professional Experience' title on the first page but the table with all my job information is now starting on the second page - leaving just a lot of blank space on the first page. One of the jobs on the second page now also splits across pages 2 and 3. I can see that it is trying to keep everything in the table together and that what I need to do is just split the table at a certain point so that I can put the first part of the table back onto page 1 and the second part of it on page 2 - but it won't give me any option to do this.
    Any ideas?

    Although this thread is several months old, I felt compelled to reply as I have just encountered this gaping hole in Pages functionality.  Jerrold Green 1 is incorrect in asserting that the OP's problem is that Pages won't split a cell across pages.  The OP clearly indicates that Pages is not moving rows that won't fit on the first page of the table, but rather it moves the whole table to the next page.
    So for example, if I have a paragraph of text at the top of page 1, and then insert a table under this paragraph that contains more rows than will fit on the remainder of the page, rather than the rows that won't fit being moved to page 2, Pages moves the entire table to page 2 leaving a big blank space on page 1.  But bizarrely if the table contains more rows than will fit on one whole page, then it will move the overflow rows onto the third page, making you wonder why it didn't just do this on page 1.
    This is with the table arrangement set to Move with Text.  If I set it to Stay on Page, the end of the table just flows over the footer and off the page into oblivion.  If I set Text Wrap to None, it just plonks the table right on top of the other text.  So it gives you the option to do something silly, but not the most sensible option.
    If I am missing something, then can someone please correct me.  Without this basic functionality Pages cannot be considered a professional Word Processor.  I'll unfortunately have to go back to MS Word.

  • Image across 2 pages

    I have a 2 page spread in InDesign. I want an image to go across both pages. For production purposes, must I break that image up into two pieces with half on one page and the other half on the second page? I have noticed that If I run a sigle graphic container across the two pages and then make a PDF, it will make the image into two that goes with the page. Is that something that it does just visually? Or would that work to have that file sent to production?

    Thanks for your quick repy and help. I was concerned about preparing the pages that way when they are intended to end up in a signature in a publication. The pages of the spread may not end up on the same physical piece of paper.

Maybe you are looking for

  • MULTIPLE ACCOUNT ASSIGNMENT IN SERVICE PO

    Hello Experts,    I've created service PO with multiple account assignment. This PO contains manually entered condition at header level.Issue is that for multiple A/C assignment, I'm getting message " No delivery Cost can be posted in case of multipl

  • How to include .jar file in our classpath

    I want to do serial communication.I have one demo program but in it they mention that set comm.jar file in your class path.Then how can I set comm.jar file in my class path?

  • BDC Migrations for Both Call and Session for same Transaction

    Hi Friends, When am trying to migrate 100 records for MM01 by using both call transaction and session method but i got the error at 50th record..i would like to know what was happen in both of them and how can i resolve those errors please can you le

  • Wake up phone on calendar event... Feature lost from old BB to new 9900

    Hi all, just a little request if anyone at RIM read this, put an option in the calendar settings or whatever that let you choose if you want the event you set in your calendar to wake the phone as this was working on the older OS, I just upgraded fro

  • Using MAP parameter type through Xacute Query

    Hey All, I have a transaction that has an input parameter of type Map. My question is what is the format I have to pass to the transaction through an xacute query. I've tried Key=[string:Value] Any help would be appreciated. Jasper Edited by: Jasper