How do I split the audio to both sides?

I was given a video to edit and the audio is all on one side. Is there a way to duplicate the track and make the new track audible on the other side?

I had tried that once before on a similar issue knowing it should be a simple fix, and for some unknown reason at that time it wasn't working so I thought there was more to it. But it did work this time. Thanks.

Similar Messages

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

There is no "adding" a device. Simply plug the iDevice into the computer. iTunes should automatically detect the device when it is connected.
iTunes can sync/manage as many iDevices as you want... there is no 1 device limit.

I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?

I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?

Use different Apple IDs for iMessage (and also FaceTime) to avoid getting each others text messages (and FaceTime calls). One of you should go to Settings>Messages>Send & Receive (and Settings>FaceTime), tap the ID, sign out, then sign back in with a different ID. You can continue to shared the same ID for the iTunes store and other services.

How do i split the digital signal for PIP?

My tv requires 2 separate A/V inputs to use PIP. How do I split the incoming signal without affecting the signal strength to STB? Everytime I connect a slpitter, the signal looses stregth and I can't HD out of my STB only digital, not HD. Is there a fix or solution for this problem?

DcmFD wrote:
My tv requires 2 separate A/V inputs to use PIP. How do I split the incoming signal without affecting the signal strength to STB? Everytime I connect a slpitter, the signal looses stregth and I can't HD out of my STB only digital, not HD. Is there a fix or solution for this problem?
It is just the nature of beast in that when you add a 2:1 splitter, you will lose 3.5dbm of signal strength (more loss per leg the larger the splitter.. IIRC a 4:1 splitter a is 7 or 7.5 dbm loss.)
How many splitters do you currently have from the ONT to that STB? Do you have any 4:1 splitters in the path that you could swap with a 3:1 or 2:1 (leaving no open legs)?
I will leave it to someone else to recommeand a MOCA amplifier, but that may be you only possible solution. It would have to be a MoCA amplifier, as the STB requires 1150Mhz to receive guide info, etc.. A traditional signal booster typically does not pass frequencies higher that 850-950Mhz.

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

How do I fix the timeline so both the images and the timeline are 1080p?

Hello everybody. I'm a relative newbie to FCP, but not totally new to the world of video editing. I've got a problem that I hope somebody out there can assist me with.
I've shot a lot of footage in HD (1080p) and have imported everything into a timeline. I've performed all my edits, transitions, music integration etc - now when I go to output the footage I realise I've made the mistake of doing everything in a 576p timeline.
I've figured out how to resize the timeline, but all the clips appear in their original 576p resolution in the middle of the canvas (ie huge bars around the image)..
My question is simple enough.. How do I fix the timeline so both the images and the timeline are 1080p? Is there a method to 'resize' all the clips to the new timeline? Will this resize the 576p clips or will they still be native 1080p?
If importing all those clips into the original timeline has destroyed pixels, then resizing to 1080p is definately not what I want to do. I want to retain all the resolution of the original clips.
Any advice would be very much appreciated. I've created nearly 300 edits in this timeline, not including all the effects and transitions. If I have to redo all this because I set up the timeline incorrectly I'm going to be rather upset!
Thanks everybody.

If you captured the footage as 1080 then the fastest way to re-size all the clips back to 1080 is to select all the clips on the time line and then in the menu bar go to Edit -> Remove Attributes. This will pop up window asking which attributes you want to remove. I would try checking the Basic Motion and Distort attributes and click OK. This should pop everything back to their original size and shape.
However, this will also remove any re-sizing or distortion that is intentional (ie to blow up a particular clip so you can focus on something).

How can i cut the audio from 1 file and put it on another?

I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
btw i have quicktime pro is that changes anything

Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

How do I see the audio waveforms in the timeline

How do I see the audio waveforms in the timeline
G5 Mac OS X (10.4.6)

In Sequence Setting (cmd-0) set the "Show Audio waveforms" in the Timeline Options tab.

How do I split the Browser into 4 sections?

I am using firefox 4.0.1 browser and I would like to know that how do I split the browser screen into 4 different sections with 4 different sites? The solution should be work on any version on the firefox.

Install this:
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
And then this:
* https://addons.mozilla.org/en-US/firefox/addon/fox-splitter-formerly-split-br/

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

Have imported video into audition but how do I get the audio to snap after editing?

Just to explain, I have imported a timeline from Premiere into Audition CC. I have one full piece of video and one piece of audio but need to clean up the audio. What I'm trying to do is edit the audio and have it snap to the piece of audio to the left as you would do normally. I will then concern myself with cutaways etc to mask the video when back in premiere. My question is how do I get the audio and video to snap in sync with my audio edits( Can't seem to get it to snap at all at the moment)
Cheers

The video in Audition is just a guide and can't be edited. So if you cut out chunks of the audio it will no longer be in sync with the video if you try and join the audio together.
When you say that you are cleaning up the audio what do you need to do to it in order to clean it? If it is just a case of muted unwanted parts of the audio that can be done in Multitrack by using the Volume envelopes to mute the audio at appropriate places without cutting anything out so it won't lose sync.

How do i delete a part of a clip and rejoin the audio on each side

How (or where in the manual are the instr) l) do i delete a part of a clip and rejoin the audio on each side. This is most frustrating. The join command is never available. If i select an area to delete everything above and below is deleted, whether or not its selected and whether or not its mute. I find in the manual only ways to move entire clips. I need to remove 2 words from a clip in one track.

i'm assuming your working in the multi-track mode since you didn't specify. select the razor blade tool and make two cuts to the audio, one where you want the cut to start, the other where you want the cut to end. select this smaller region that you want to delete and press the delete key.
now you'll have a gap of silence where that unwanted clip was. select the clip(s) to the right of the cut and drag them left. the default behavior is to do a cross fade when the clips overlap. you'll probably have to play with the cross fade amount in order to get it to sound natural.
hope that helps!
scott
PowerMac G5 2.5GHz Mac OS X (10.4.7) MacBook Pro 2.0GHz

How do I split the audio to both sides?

Similar Messages

Maybe you are looking for