How do i split the digital signal for PIP?

My tv requires 2 separate A/V inputs to use PIP. How do I split the incoming signal without affecting the signal strength to STB? Everytime I connect a slpitter, the signal looses stregth and I can't HD out of my STB only digital, not HD. Is there a fix or solution for this problem?

DcmFD wrote:
My tv requires 2 separate A/V inputs to use PIP. How do I split the incoming signal without affecting the signal strength to STB? Everytime I connect a slpitter, the signal looses stregth and I can't HD out of my STB only digital, not HD. Is there a fix or solution for this problem?
It is just the nature of beast in that when you add a 2:1 splitter, you will lose 3.5dbm of signal strength (more loss per leg the larger the splitter.. IIRC a 4:1 splitter a is 7 or 7.5 dbm loss.)
How many splitters do you currently have from the ONT to that STB? Do you have any 4:1 splitters in the path that you could swap with a 3:1 or 2:1 (leaving no open legs)?
I will leave it to someone else to recommeand a MOCA amplifier, but that may be you only possible solution. It would have to be a MoCA amplifier, as the STB requires 1150Mhz to receive guide info, etc.. A traditional signal booster typically does not pass frequencies higher that 850-950Mhz.

Similar Messages

How to set up the digital signature for xi server

dear all,
these days i need to implement a interface using the digital signature technology to enable it's security transition.
we are going to use the digest sign with partner.
Could anyone of you tell me the detailed steps concerning the seting up at xi server for this pupose ?
Thanks a lot !

This is a really urgent request,
does anyone have the experience on this, please give me some hints ,thanks !!
BR
ZhouHui

How can I View the Digital Booklet for my Albums?

I have a few albums in my library with digital booklets, but have never been able to view them. I am working on Windows 8 right now, and have the updated version of iTunes. Anyone have a solution?

Install Acrobat Reader.
tt2

How to input/output a digital signal and acquire an analog signal at the same time?

Dasylab, version: 8.0.04
Acquirement Card: PCI1002L
When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
same time, DasyLab tell me the rate is too high and stop.
so, I searched the manual book1 (user guide) for that, it showed me :
To internally equalize measurement time and system time in the analog input, digital input and counter
hardware modules, use the following settings:
   Synchronization: PC Clock
   Sampling rate: <= 5Hz
   Block size: =1
the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
application.
so, how to improve it? who can give me a example programm for me. thanks!
by the way, I come from China, my English isn't good, I'm sorry.
Allen, China.

Hi,
Have things changed over the years?
I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
1. What can be done to synchronise AI with DO?
2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
Thanks in advance!

Wait for the digital signal

Is there like "wait for the panel activity" in digital signal, "wait for the digital signal goes up" etc. ?
Or is it bad to make it with sequence structure and inside of first sequence use while loop?

If you need to wait for a digital signal before continuing on with your program, the best way is to have a while loop that continuously reads the signal and stops the loop when the signal goes high. You can put this loop in the first frame of a sequence, or you can wire an output from the loop (like error out from the device read vi) into your next step. Be sure to put a delay (100mSec) in your loop so that the loop does not hog CPU time.
- tbob
Inventor of the WORM Global

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?

I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?

Use different Apple IDs for iMessage (and also FaceTime) to avoid getting each others text messages (and FaceTime calls). One of you should go to Settings>Messages>Send & Receive (and Settings>FaceTime), tap the ID, sign out, then sign back in with a different ID. You can continue to shared the same ID for the iTunes store and other services.

How do I find the digital copy of a movie I just redeemed if it is not listed with my movies?

How do I find the digital copy of a movie I just redeemed if it is not listed with my movies?

I just liked them all right now.
Thanks. So yours only shows one cover movie poster too then. That is what mine shows.
When you say this:
based on whether I've got HD selected or not, e.g. my iPhone shows the SD size, but my iTunes based on whether I've got HD selected or not, e.g. my iPhone shows the SD size, but my iTunes (computer) shows HD.
Do you mean when you have your phone selected on the summary page as you instructed above vs.... what selected for your itunes/computer showing HD?

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

How can I get the digital booklet included with the albums I am purchasing from iTunes directly on my iPad?

How can I get the digital booklet included with the albums I am purchasing from iTunes directly on my iPad? My MacBook died about 6 months ago, so now I just have an iPhone and iPad. I would like to be able to see the Digital Booklet in my iPad when I download the album. I do not have any other computer to download the booklet to and sync to my iPad.

Apparently, you have to download the booklet to iTunes on a computer first, fiddle with the file type, then sync it as a book to your iPad. See http://support.apple.com/kb/HT4194 for details.

I put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?

i put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?

Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

U410 Windows 8 how do you split the screen in two?

I have an IdeaPad U410 with Windows 8 as an Operating system. I would like to know how do you split the screen in two. Also I would like to know if I can put my screen as a touch?
Moderator Note; subject edited for relevancy

hi BoJ,
Welcome to the Lenovo Forums.
If you're referring to having an extended display , you will need to have an external monitor and enable extended mode by pressing the Winkey+P and select Extend.
If you want to split the screen to work with 2 documents or 2 windows at a time, you can snap the windows by pressing Winkey+ Left or Right arrow - check this article in reference.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I redeemed Night at the museum 2 digital copy on my old computer I moved over to mac last year and I wanted the digital copy on mac but it says it's already been redeemed which it has on my old computer, so how would i get the digital copy on my mac?

I redeemed Night at the museum 2 digital copy on my old computer I moved over to mac last year and I wanted the digital copy on mac but it says it's already been redeemed which it has on my old computer, so how would i get the digital copy on my mac?

I doubt the license is affecting the performance - it might be a case of the software being too old for the machine.
In any case, you can contact Adobe support thru chat and have them reset your activation count to eliminatre your doubts regarding the license.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Where and how can i download adobe digital edition for android (samsung tab 2.0)?

Where and how can i download adobe digital edition for android (samsung tab 2.0)

You will want to download a copy of Bluefire Reader from the Google Marketplace.

Unable to autorise the digital edition for Overdrive

I am unable to authorize the digital edition for overdrive. I am using the same user id and password that of Overdrive account. I still get the error "Incorrect Login Id or password for the selected ebook vendor."
How do I resolve the issue.

We plan to remove this limitation in the free Personal Edition of Lumira before the end of this year. In the meantime, as mentioned by Chris, you can initiate the 30 day trial option which you can activate from within the "Home" page of the Personal Edition of Lumira.
Here's more info on accessing the 30 day trial of the Standard Edition:
SAP Lumira, Standard Edition Free for 30 Days. Here's How!

How do i split the digital signal for PIP?

Similar Messages

Maybe you are looking for