How do i start a recovery?

I allready have have a recovery cd , i just dont know how to start it.
I have satellite a300 .
please help

Which Satellite A300? What is the part number? Which country?
In any case, it will be something like this (for US models). See the section Hard Disk Drive Recovery using the Recovery media, which begins on p. 67 of this User's Guide.
Satellite A300 Series User’s Guide
-Jerry

Similar Messages

How do I start a recovery directly from the recovery partition? Windows 8

Is there a method by which I can go directly to the recovery partition on my CQ58 and initiate a system recovery? I downgraded my system to Windows 7 Home Premium and now I am ready to go back to Windows 8. I made sure to create the Windows 8 recovery disc yet when I run it everything starts normal but then it displays a message Unable to reset your PC. A required drive partition is missing. Yet the recovery partition is there and all of the software is still contained in it. When I click on the folders on the drive it denies me access. What do I do?

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I looked into the issue you are having with the missing partition on your Notebook. I found a document called Resetting Your PC to Resolve Problems for Windows 8. I also found a document for you from Microsoft. It is called Fix: The drive where Windows is installed is locked. I think that this is the Manual for your Notebook as well (please double check it is the right Notebook.) If not I would be happy to get you the right one. Open the manual and press ctrl+f on your keyboard. A little box will pop up (its a search box). Type in partition to see every time partition is mentioned in the whole document and use the arrows to find out where. If you pay special attention to Chapter 7 page 74 to 79, it will give you information about partitions and troubleshooting.
Please follow these provided troubleshooting steps.
Have a great day!

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

How do I make a recovery sys disk for my new HP Notebook lap top

I want to make a recovery usb flash drive of my new laptop system.I have a 32 g flash drive but want to know the steps that I have to take to create it..I know it will take about 3-4 hrs to do but how do i start and under what app do i create it under..as I see so many with the word recovery..Any help would be appreciated..

Hi,
Actually Backup and Recovery are not the same. You can backup the whole HDD but still can't use the backup to recover your machine. For normal personal computers, there are few recovery scenarios:
(a) Recovery back to factory settings: Bring the machine back to day 1, back to the time we open the box.
(b) Recovery at a recovery point (not Windows Restore),
(c) Recovery to previous good point (Windows Restore)
The above 2 links show you how to create a set (or USB flash drive) to allow you to "to create recovery media that you can use to restore your computer to its original condition in case of a major problem with your computer." or point #a above.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I get a recovery disk for Satellite P300-1CI?

Hi everybody,
first, sorry for my english, I'm a belgian and I speak french.
Yesterday I bought a toshiba Satellite P300-1CI, when I started, I must installed Vista home.
I would like to format my disk and reinstall my old Windows XP.
My question is : How can keep an image disk with Vista? I don't have an installation disk of Vista and don't know my registration key of it.
How can I have a recovery disk ?
Can you help me please.
PS : Sorry for my english

Hi mate
User manual is really interesting document and in most cases it answer all you questions ;)
Anyway, the Toshiba recovery disk should be created before you would format and install on the HDD.
You have to use the preinstalled Toshiba Recovery Disk Creator application in order to create the Recovery DVD.
Now to you other question;
The Vista image which is preinstalled and placed on the Recovery disk (after recovery disk has been created) is activated already and you dont need to insert any keys or activate anything.
Greets

HT4848 How do I get the Recovery Disk Assistant?

Reading 'OS X Lion: About Lion Recovery Disk Assistant' at http://support.apple.com/kb/HT4848?viewlocale=en_US . My 1 day old macbook pro would not let me or root login (after resizing the os partition with diskutil to install fedora linux) and I need to restore the OS. Now this paper and support engineer tells me to recover the OS I need a working OS to prepare the recovery USB disk. Isn't this a catch 22 situation? Why wouldn't Apple sent a $1 CD with the $2400 macbook? To save $1? I had OSX 10.6 from my mini and tried to boot from that - no go - the most expensive macbook MD386LL/A starts beeping in the middle of the boot and crashes.
Since apple does not have Lion 10.7 CDs anywhere on the applestore.com I will have to nicely pack it and sent it back to Amazon and get at new one so I can start with Lion Recovery Disk Assistant fist.
If only there was a notebook on the market with 1920x1200 screen...

Thanks for the link - good summary. I managed to recover the EFI partition 2 with system restore and I am running it now - I have a +1MB/s internet connection and the estimate is ~2h of download of some new software. I wonder how long this total internet recovery without the data on local disk would take - described in that link you sent? I will try this next with a spare SATA drive
This is not an improvement over a local CD image. There must be some explanation for this "enhancement". My guess it is to protect Apple from lost revenue and stop their customers form upgrading Apple computers for free.

How do I start my setup process all over again?

How do i start my setup process all over again? I didn't complete it and I don't think its registered. My PC's iTunes does not see it.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Try another cable
Try on another computer
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How can I recover my Recovery hd

How can I recover my recovery HD on my mac pro

Better forums would be Lion Community, and MacBook Pro (this is not notebook users).
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
Depends what year and whether yours came with Lion (2011 and later) or not.
Whether you know how to reinstall Liion. But what happens when you hold Option key or Command-r when you startup? you can't boot into Lion Recovery? And do you have TimeMachine? an external backup drive?
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
http://support.apple.com/kb/HT1427
General Time Machine Stuff:
Time Machine vs. Clones and Archives
How Time Machine Works its Magic
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Frequently Asked Questions
Troubleshooting
Using Time Machine with a Time Capsule
Using Time Machine with an Airport Extreme Airdisk
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form
Using Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.1
OS X Lion Install to Different Drive

HT1766 my ipad is disabled how do I start it all over by connecting it to itunes on the computer im having problems

my ipad is disabled how do I start it alll over by connecting it to itunes on the computer

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can I start the BRTOOLS or BRGUI?

Dear experts:
   I would like to ask you a question, that is how can I start the BRTOOLS or BRGUI?
   many thanks!
   Best Regards
Edited by: feng Qiu on Jun 26, 2008 5:30 AM

Hi fenq,
Login as <sid>adm & run brtools after taht you fet the menu & many option
BR*Tools main menu
1 = Backup and database copy
2 - Restore and recovery
3 - Check and verification
4 - Database statistics
5 - Profiles and logs
6 - Additional functions
7 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
After that choose option & than enter.
If you have any query than message me freely.
Karan

My i ph 3 does not start only aaple sign coming on my screen when i start my ph,, pls let me know how i can start and use my ph

how i can start my i ph 3 when only apple sign comes on my ph screen

If you cannot put it in recovery mode to restore it, you'll have to try putting it in DFU mode to restore it as described in this post: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0. That's the last thing you can try. If DFU mode doesn't work you probably have a hardware failure and you'll have to have Apple take a look at it.

How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

My hard drive died. How can I start my computer with my Time Machine external drive?

My hard drive died. How can I start my computer with my Time Machine external drive?

Pondini wrote:
If you're on 10.7.2, yes, you can boot from the TM drive.
Beep, beep, beep....
Hold ON! Getting a call on the red phone.
"Yes...yes.... ok!"
It's confirmed, H.e.l.l. has finally frozen over! TM drives are now bootable!
Still it's not a real bootable clone, can't run the computer off the external drive for long in only Recovery mode, still requires the boot drive to be replaced if it not functional, and with TM backing up every hour, isn't going to offer much software protection as the TM drive is just as likely to be as messed up as the internal boot drive.
For a iMac it still requires the computer to be taken in to Apple for a drive replacement, as ONLY Apple can do it due to proprietary connections and firmware on the iMac hard drives.
But it is bootable!
The backup time factor can be controlled using TimeMachine Editor, from every hour to just when the user thinks it's necessary.
Apple lurches slightly forward! Hurray!
Question is, can one restore from earlier stable TM's or just the last one? In this bootable fashion?

Pavilion a1240n Bad BIOS Check Sum Starting Bios recovery

I have a Pavilion a1240n when i turn on the computer the first screen that comes up says Bad BIOS check Sum starting BIOS recovery
Checking for floppy...
Floppy not found!
Checking for CD ROM....
CD ROM not found!
Checking for Floppy...
Floppy not found!
It does this continuously and I cant get pass the screen any Ideas on what could be the problem and how I can solve this issue
Thank you in advance

Hi,
I have a Media Centre PC M7260In. I started the PC after many days. Now while i start the PC it shows the Error as below.
Bad Bios Checksum, Starting Bios Recovery
Checking for Floppy
Floopy Not Found
Check for CD-Rom
CD-Rom Not Found
I already done the procedure as per link.
1.Remove the Battery
2. Change Jumper setting without Power Cord and reset as default.
No Change Please Help
Thanks & Regards,
Shiju

How do i start a recovery?

Similar Messages

Maybe you are looking for