How do I start my setup process all over again?

How do i start my setup process all over again?  I didn't complete it and I don't think its registered. My PC's iTunes does not see it.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.                        
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
For how to restore:                                                             
iTunes: Restoring iOS software
Try another cable
Try on another computer
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar                              

Similar Messages

  • I rented a movie directly from Apple TV. I finished downloading successfully, however, I didn't start watching it right away. Now, a day after, I want to watch it, but ATV tells me I have to start the downloading process all over again. WHY?

    I rented a movie directly from Apple TV. I finished downloading successfully, however, I didn't start watching it right away. Now, a day after, I want to watch it, but ATV tells me I have to start the downloading process all over again. WHY? I thought after sucessfully downloading the movie to ATV, it would be available for 30 days in my ATV, without having to download again. To my surprise, it tells me I have to download all over again. It took me 3 hours to download the movie, now I have to repeat the process? Can someone tell me why? Thanks.

    Welcome to the Apple Community.
    The Apple TV will delete content if it is used to plat something else or is turned off. It only has a limited amount of volatile memory.
    If you want to download something for watching at a later time, it would be best doing it from iTunes on your mac/PC and streaming it to the Apple TV when you are ready to watch it.

  • How do I set up Game Center it say account never used then I verify it then it repeats the process all over again.

    Help

    Who is your internet service provider used for connecting to the internet?
    Will you also be accessing an email account and SMTP server that is provided by your internet service provider with the Mail.app?
    Upon creating this account I ran into trouble because I tried to
    use the address I had created before and kept getting an error
    message saying that account already existed (Although I had no
    access to it to make any changes, I don't know why). So finally I
    said the heck with it and just created a new account with the
    new address:
    You no longer had access to your .Mac trial account because you let the account expire several months ago without purchasing the .Mac account before the expiration date. This is common practice with many ISPs and email account providers. Once an email account/address is set up, if you let the account expire or cancel it, you usually can't use the same address if you decide sometime later to renew.
    Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
    Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
    If this doesn't resolve it, there is another option.
    FYI - you shouldn't provide your email address out in the open in a public forum such as this since spammers can easily "harvest" your email address this way causing being bombarded by spam.
    Would you like your email address removed from your post? If so, I can request this with a moderator.

  • (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

    (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
    (2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
    Thanks
    Sam

    TidyCup
    What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
    But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
    1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
    To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
    or
    with your mouse cursor draw a rectangle around the clips that you want to select
    2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
    Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
    Are you asking about photos with landscape or portrait orientation?
    The pan and zoom tool does one photo at a time.
    Have you read the Adobe documentation on the Pan and Zoom Tool?
    http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
    Please review and clarify and then we can get into greater details on this.
    Thanks.
    ATR

  • HT1725 I have downloaded a movie and the downlaod has reached the end it will give a message saying "processing " and then it will start all over again . My pain I have spent so much on Internet data bundles  I can't afford to spend any more for just  one

    I have downloaded a movie  I purchased form iTunes and every time I get to the end of the download I will see a message "processing " and before i know it , the download will start all over again . My pain is i have spent so much money on the Internet data bundle almost twice the cost of the movie ! i can't afford to keep repeating this process , pls any ideas on how to get me out of this mess !

    can you stop the download completely? try to stop the download, delete the downloaded file and then re-downloading it. itunes should save your purchase so you won't have to pay every time you download.

  • I have a current iPhone 5 with all my apps and games at certain levels, how do I use iCloud to transfer current game levels as only a few games have transferred and other games want me to start all over again on my new iPad?

    I currently have an iPhone 5 that I play games on regularly and I have just bought the iPad 4 and I want to transfer all my game progress from the iPhone to the iPad. I have turned on iCloud on both devices and backed up and while all my games transfer only some of the games maintain progress where others want me to start all over again. I pretty sure I doing something wrong... Can some help or give me idiot proof guidance on how do do this successfully. I'm generally pretty tech savvy but this has me stumped and iCloud is ment to be easy to use.

    I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
    So if I were you, I would address that individually with every game provider.

  • When I only want to close the current window to return to the previous window, the whole firefox site closes down, I end up back at my desktop & have to start all over again. How can this be fixed?

    If I close a window I should be back at the previous window that I was at when I followed a link to this window. At least that's the way Internet Explorer works, which I have used for years. The only thing that prevents me from using Firefox exclusively is that it is very time consuming to have to start all over again from scratch every time I close a window. For instance, say I type "cats" into the search box. It gives me links to a list of "cats" sites. I go to a "cats" website, decide I don't like it so close the window to return to my list of sites, but instead of returning me to the list, I end up at my desktop. Then I have to start all over, just like I had not even been online. Very aggravating. I don't know how else to describe the problem, I can't believe that other people haven't had a similar complaint, unless I just have some settings wrong?

    Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
    Still works on Windows, and with other browsers... It would be great if a fix is available.

  • After I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

    after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

    Try removing and then reinstalling the Apple software using these instructions.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS

  • My Nano took a trip thru the washer and dryer and I assume it is destroyed.  My wife bought me a new one, but Itunes doesn't recognize it, although my computer does.  How do I get pack into my music, I don't want to start all over again?

    My Ipod Nano took a trip thru the washer and dryer and I assume it is destroyed. 
    My wife bought me a new one.  It shows up on  my computer (windows vista), but Itunes doesn't recognize it.
    How do I get Itunes to recognize it.  I spent a lot of time recording my old cassetes and don't want to start all over again.  I just want to get back to where I was.
    GGus

    Did you already try the troubleshooting here? iPod not appearing in iTunes

  • How do I get a clean start for catalog to start all over again?

    Running PSE5 on Win XP w/SP3
    I have not been able to get any information about how to recover a catalog from files that have been copied as a backup, so it looks like I'm forced to start all over again.  There are about 17000 images in the C: drive.  The images all seem to be OK.  A few days ago there was a properly operating catalog file (and all the others) there, too.
    Since then, I have tried to learn how to make the former catalog file operative, but no luck.  Since then, I have read that just uninstalling and reinstalling PSE5 will do nothing to give me a clean start - that is, all the old (now problematical) catalog file trouble will still be there.
    To start all over again seems like such a waste of time, since I have copies of all the catalog files as they were properly operating in March, but it seems that something important is missing and none of this stuff is useful in any way.  I'm not the PSE5 user, so I didn't know about the external catalog backup that can be done from within PSE5 - so the possibility to use that technique does not exist.  All I have is a straight copy of everything in the Documents and Settings.. ...Application Data\Adobe folder.  I've tried replacing the whole Adobe folder with the backup files, starting PSE5 and looking at the catalog, but that didn't work either. I just get the same old empty catalog.
    So, the 'start all over' option seems like the only way out.  Anyone who has lost the catalog knows how much work is in the catalog, so any help with either making the old catalog file work through reconstruction somehow, or starting all over again, will be very helpful.  Someday, I'd like to learn how this happened.  Until then I'll be backing up the catalog file from within PSE5 to an external location...  Everytime there's a new entry in the catalog information.  That method seems simple enough that even I could do it.
    Thanks,
    Al
    (K3PXR)

    I tried to open the resident 'My Catalog.psa' file.  PSE5 dutifully did that and the catalog information, such as tags and other information that would normally be present when looking at the Organizer is blank, as if nothing has ever been entered in the catalog.
    The 'My Catalog.psa' file is about 600K (according to windows explorer) and resides in the 'Catalogs' folder.  Also there are:
    My Catalog-2.psa  about 3252K
    My Catalog-2.psa about 5380K
    In the folder: 'Catalog Folders' were the folders:
    My Catalog
    My Catalog-1
    In the folder My Catalog are the files:
      backupCt.dat  1K
      collstatus.dat  1K
      tagstatus.dat  1K
      thumb.5.cache  10K
    In the folder My Catalog-1 is the file:
      tn.4.cache  32394 K
    Above I say 'In the folder, Catalog Folders, were the folders My Catalog and My Catalog-1' because last night when shutting down, I didn't know what was in those folders.  I was too tired to check.
    I did copy everything that was in the Adobe folder and all associated sub folders, including the folders above, to an SD flash card before I started to do anything else.  Becasue of this, I should be able to get back to the way it was before I started to do anything, then I opened the catalog file My Catalog-1.psa.  It said that it was made from an earlier version, asked to convert it and contained the 2002 to 2004 catalog information.  To the best of my knowledge, those photos were never entered in PSE5, and probably were from an earlier version of PS Album. 
    So, where is the information that was once in the PSE5 catalog?  Which files should contain that information?  Why can't the files simply be copied from the backup copies back on to the C:\ drive in the proper folders and then upon starting PSE5 see at least the catalog that was present when the copies of the files in the folders above were made?  What dumb mistakes could have been made to overwrite the information in the catalog and make the catalog appear empty?  If I don't learn this, I'll not be able to prevent it from happening again.
    I'm not on the machine with the trouble at the moment, and since it is not my machine, I sometimes have trouble getting to it during normal waking hours.  I don't know the exact clicks and keystrokes that got the catalog from its normal function to appearing and functioning as if it is empty..
    What exactly are the symptoms of "PSE5 doesn't like..."?  The catalog appears and functions as if it is empty - as if nothing ever has been or ever was entered into it.  PSE5 Organizer is operating normally as far as I can tell.  I cannot seem to locate the former catalog information and it has not loaded the former catalog file information.  A new test catalog was made and it opens and shows the thumbnails of its four images.  I hope that the test catalog I made didn't overwrite anything that would prevent going back to the original catalog information.  The copies of the files can be restored as they were a few months ago, though, because there is a copy of them on an SD card.
    Thanks,
    Al
    (K3PXR)

  • How do I start or setup  a Wi-Fi account on my iPodtouch ver5.0 ?

    How do I start or setup  a wi-fi account on my ipod_touch ios_5?

    There is no such thing as a "Wi-Fi account." You have to buy and set up a Wi-Fi router if you want to connect to the Internet at home, unless you have access to some else's network and password.

  • How do I start the CC process?

    I bought a Photoshop and Lightroom update in 11/13 and thought that included CC. I have serial numbers on my receipt. How to do start the CC process? Janis Hefley

    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your paid Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  • How do I change an Apple ID payment method to 'None'? I've tried everything and the only solution is to get a new e-mail and start all over again. Any other options?

    How do I change an Apple ID payment method to 'None'? I've tried everything and I found the only solution is to apply all over again with another e-mail address. Any other options?

    Buy an iTunes Music Card and redeem it to your account - the "none" option should be available then.

  • I have purchase the Batman trilogy in HD but when I try to download them an error comes out and stops the downloads, and when I hit resume it starts all over again. How can I fix this problem?

    I was downloading the trilogy as we speak and out of the sudden the download stops and it says there is an error. I try and resume the download but it starts all over again.

    Hi tella7,
    If you are having issues downloading purchased content from the iTunes Store, you may find the following article helpful:
    Apple Support: Resolve issues between iTunes and security software
    http://support.apple.com/kb/TS3125
    Regards,
    - Brenden

  • HT201272 how to restore your new games to new device that your dont have to start all over again

    i got new phone but my other games can't be restore,i need to start all over again from the beginning.i keep buying gold bar just to get to the higher level but now i just lost everything that paid for my games. that's suck i feel like cheated!
    is there other way to restore your old games?

    i got new phone but my other games can't be restore,i need to start all over again from the beginning.i keep buying gold bar just to get to the higher level but now i just lost everything that paid for my games. that's suck i feel like cheated!
    is there other way to restore your old games?

Maybe you are looking for