How do I start on a particular frame?

Hey guys, I need my Adobe Flash CS5 project to start on the 4th frame in the project on the timeline, instead of the first.
I have tried gotoAndStop and gotoAndPlay, but both somehow disable other actions I have setup on the timeline, like on the website I'm making, 3 buttons, "Home / About / Info" it disables buttons from switching frames, very odd.
Thank you!
Michael

Ok..thats pretty confusing to read, I am a beginner.
The reason why I have actions on different frames is between i have motion tweens on each one to animate them.
Let me paste my timeline.

Similar Messages

Start project on a particular frame?

Hey everyone!
I just want to say thanks for the help I have gotten so far! It has been quite useful!
Does anyone know how I can start my project on a particular frame? I accidentally made my "main" page for my site on the 4th frame and it starts on the 1st frame....
Thank you again!

drag your 4th frame to first
or
write gotoAndStop(4) on frame 1
http://www.darshanrane.com

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames)

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.

In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
Andy

How do you start music on the 8th frame in iMovie on iPad

how do you start music on the 8th frame on a ipad with imovie

Add a song to the start, trim it to 10 frames or what you want,
THen turn the volume to zero.
THen next track then starts where the silent track ended.
Terrible workaround, but it works.

Listing the objects in the particular frame

I have just started to refresh Swing. I want all the objects available in the particular frame.
Ex. I have a login frame. I want all the objects available in the frame.
ie.
objects of two textfields.
objects of two labels (un and pwd)
submit button
cancel button .
How to perform this ?

Hi,
use Container#getComponents()
NB : On JFrame (or JDialog) , you should use getContentPane().getComponents().
Nico

How can I start a new paragraph within the same table cell?

In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)? I'd like to enter a mini-list of several items of various lengths of data.

While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
With that box unchecked, Shift Return types a soft return (new line without a paragraph break).

How does FCP Pro X manage free frames?

I see that adding a freeze frame has been restored in v10.1.2 - I wonder what happened there?
Now that the menu entry is back again I have created a freeze frame. FCP assumes that I want to use it where it is in the timeline - freezing the action. I guess some people might want to do that - but I want to use it elsewhere in the project, which means moving the clip out of the storyline, deleting the partial clip created when the original clip was sliced to create the freeze frame and then extending the original clip back to full size. Geez, these developers sure know how to create a lot of extra work - it would be nice if FCP just created a new clip in the browser.
But what exactly is this new clip? It seems to exist only in the timeline. It has no individual name, I cannot favourite it or add a keyword. Perhaps I have to create a new compound clip? I am assembling a batch of stills (maybe 50-60) from my footage to use at the end of the film - it seems that this will require an awful lot of work if I have to do all these steps for every freeze frame I create.
I can't easily do it from the browser either - because there is a lot of material in the browser than there is in the timeline and it is not sequenced the same way.
Workflow?
1.     Locate the clip in the timeline, press Option F
2.     Move the new clip out of the timeline
3.     Delete the partial clip on one side of the gap created by moving the new freeze frame clip out of the timeline
4.     Extend the clip to its former length
5.     Select the new clip and make a new compound clip
6.     Assign keywords
7.     Repeat for each freeze-frame.
I can see I am not on the same planet as the people who built this software... Does anyone know an easier way to achieve this?
Stephen
ps: did anyone else notice that the Add Freeze Frame (Option F) menu item was missing and has now returned?

Thanks for that - that's much better.
Perhaps I have an old copy of the manual - I will check. This is what the manual says - and this produces an inline freeze frame:
Create freeze frames
You can easily create freeze-frame clips from any video clip. Freeze-frame clips hold a particular frame in place, temporarily stopping the action onscreen.
You can create freeze-frame clips from clips in the Timeline or the Browser. If you create a freeze- frame clip from the Browser, it is attached to the primary storyline at the playhead location as a connected clip.
You can create freeze frames on the fly during playback or by navigating to a specific frame in a clip.
Note: A freeze-frame clip preserves any attributes that were applied to the source clip, such as settings and effects.
Create a freeze-frame clip
1 In the Timeline or the Browser, do one of the following:
Move the skimmer or playhead to the frame you want to freeze.
Begin playback of the clip.
2 Choose Edit > Add Freeze Frame (or press Option-F).
How the freeze frame is added to the project depends on whether the freeze frame was created
from the Timeline or the Browser.
If you created the freeze frame from a clip in the Timeline: A new freeze-frame clip is inserted at the skimmer or playhead location in the Timeline.
If you created the freeze frame from a clip in the Browser: A new freeze-frame clip is attached as a connected clip at the playhead location in the Timeline.
Change the default duration of freeze-frame clips
Freeze-frame clips have the same default duration as still-image clips: 4 seconds. You can change the default duration in Final Cut Pro preferences.
1 Choose Final Cut Pro > Preferences (or press Command-Comma), and click the Editing button at the top of the window.
2 Adjust the Still Images value slider.
If you don’t want to create a separate clip for freeze frames, you can create a hold segment using the Retime pop-up menu. For more information, see Create a hold segment on page 300.

How to get the footage's current frame number in expression?

There are 2 layers.One is text layer,one is sequence layer.
Footage has begun from the 20th frame.
Therefore, the number of composition's current frame number and footage's frame number has shifted.
I want to show footage's frame number in text layer . not composition's frame number.
How to get the footage's current frame number in expression?
Tatsuya

>Footage has begun from the 20th frame.
Do you mean that the footage layer has been trimmed (so that the start of the footage lines up with the start of the comp, but the first 19 frames are not visible), or moved to the left (so that frame 20 lines up with the comp's frame 0), or that the sequence actually begins with the 20th frame (at frame 0 of the comp), or something else?
Are the frame rates of the comp and the footage the same?
Dan

How to debug start routine for the custom code?

Hi Experts,
Can anybody tell me how to debug the start routine? Also could you please guide me where to write the custom code in the start routine.
Thanks in advance.
Sharat.

Rajkumar,
Thank you for your help. but the blog link that you send it to me does not mention anything about ABAP debugger screen.
What should I do once I get in to the ABAP debugger? the link only tells how to get to the ABAP debugger that I know.
Also it say that I have to use the infinite loop to debugg the start routine.
Can anybody tell me how to debugg start routine with the scren shots please. I don't know how to use infinite loop in the start routine. Is their any easy process step by step to see my particular record behavior in the start routine?
I will assing you the points. again thank you.

Start Workflow from particular Step and assign to particular group of members

Hi
We are working on workflow using CQ 5.5.
Is it possible start workflow from particular Step and assign this workflow to particular group of members dynamically(Using Process Step).
Workflow Name : Single Page Workflow
                    Start
                        |
                    Step 1
                        |
                    Step 2
                        |
                    Step 3
                        |
                    Step 4
                        |
                    Step 5
                        |
                    Step 6 (Process Step)
                        |
                     End
In Step 6 , we will start workflow for list pages dynamically , for that we written code as
public class PublishTranslation implements WorkflowProcess{
    public void execute(WorkItem item, WorkflowSession wfsession, MetaDataMap metadata)
            throws WorkflowException {
           WorkflowModel model = wfsession.getModel(item.getWorkflow().getWorkflowModel().getId());
           WorkflowData wfdata= wfsession.newWorkflowData("JCR_PATH",pagePath[i]);
           wfsession.startWorkflow(model, wfdata);
This code starting workflow from step 1.
I need help on
1. How can i start workflow from step 2 or 3 ?
2. How can i assign this workflow to group members ?
Thanks & Regards

Hello Ravindra,
Logically it shouldn't allow you to do that and same happening because start workflow call on model will always trigger the workflow from starting point (means the very first step after start component in workflow design)
To achieve this you have other ways, i would suggest to try below if it works for you.
1. Instead of creating a new workflow just branch it programmaticaly and route back to previous step
      List<Route> routes=wfsession.getBackRoutes(item);
                 Route route=routes.get(WHAT_EVER_STEP);
                 wfsession.complete(item, route);
2. Create a new workflow model which starts from second step and using code get access of that workflow
     wfsession.getAllWorkflows();
for delegation as mentioned by Yogesh, you can try wfsession.delegateWorkItem(WorkItem item, Authorizable participant)
Thanks,
Pawan

How do I start firefox in safe mode on a Mac as the equivalent of holding option key whilst starting doesn't open dialogue on Mac?

I am trying to reset toolbars and am following firefox's help instructions. How do I start firefox in safe mode on a Mac as the equivalent of holding option key whilst starting doesn't open a dialogue box on the Mac?

Thanks Morbus.. I hadn't noticed that but it was already set at Mac. I tried it again and it worked this time... but alas my main problem persists:
My back and forward buttons don't work in Firefox and I've lost all of my bookmarks! I've tried a few of the suggestions but without success at the moment.
Particularly unhelpful are the instructions to back-up your lost bookmarks - which I can't do cos they're lost!!

How can I start my application?

hello, sorry for my English, it's not very good....
I have to program a web (with Database) for a private school where
administrator, teachers and pupils enter login and password
and in function of this information, they will be shown
some menu options or others.
For example, Administrator will be able to work with all the menus,
Teachers will be able to work with "Lessons" and "Exercises" menus,
and Pupils will only be able to work with "Exercises" menus.
How can I start? Servlets? JSPs? Should I use Hibernate or Entity Beans??
Ohhhhhhh, my God! I'm so lost !
Thanks

hello, sorry for my English, it's not very good....
I have to program a web (with Database) for a private
school where
administrator, teachers and pupils enter login and
password
and in function of this information, they will be
shown
some menu options or others.
For example, Administrator will be able to work with
all the menus,
Teachers will be able to work with "Lessons" and
"Exercises" menus,
and Pupils will only be able to work with "Exercises"
menus.
How can I start? Servlets? JSPs? Should I use
Hibernate or Entity Beans??
Ohhhhhhh, my God! I'm so lost !
ThanksStay away from entity beans in particular and EJBs in general. You can do this without that complication.
Write your user interface pages as JSPs.
Unless you know Hibernate already, I'd recommend writing straight JDBC code to access the database. Put this in POJOs (Plain Old Java Objects) that you can test off-line.
Write one servlet that all the JSPs talk to. Have it figure out which page made the request, perform the appropriate action, and forward back the response JSP.
I'd strongly recommend that you learn JSTL and keep all scriptlet code and business logic out of your JSPs. Get a copy of Hans Bergsten's JSP book by O'Reilly.
Good luck. Tough problem to start with.

I downloaded the free trial, how do i start using it

i downloaded the free trial, how do i start using it

yes thank you i have done that ....i was under the impression that i
could mould two different people in the same frame picture ....if so how
do i do that ....??i cant find tutorial .... thank you
On Tue, Jun 10, 2014 at 9:03 AM, Jeff A Wright <[email protected]>

How to get the values from repeated frame?.

Hi
how to get the values from repeated frame?. i have to disply the first 3 digits in another place in my report.
i have field empno in repeated frame and i want to disply first 3 digits in another place in the same report.
thanks

How often do you need to display it? It sounds like you might want to base a summary on that formula with a function of first or last. If it's a per page basis, it can be a page level summary. If it's at a higher level repeating frame, then you can create the summary at that level. I'd suggest taking a look at the online help for summaries using the first/last functions.
Hope that helps,
Toby

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How do I start on a particular frame?

Similar Messages

Maybe you are looking for