How do I start or setup a Wi-Fi account on my iPodtouch ver5.0 ?

How do I start or setup a wi-fi account on my ipod_touch ios_5?

There is no such thing as a "Wi-Fi account." You have to buy and set up a Wi-Fi router if you want to connect to the Internet at home, unless you have access to some else's network and password.

Similar Messages

How do I start my setup process all over again?

How do i start my setup process all over again? I didn't complete it and I don't think its registered. My PC's iTunes does not see it.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Try another cable
Try on another computer
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How many iPads can you setup on one iTunes account for a school?

How many iPads can you setup on one iTunes account for a school?
What is the best system? We have 30 iPads.

That would be fine.

How do I start the Setup Assistant???

Okay, so I upgraded to Leopard, but the Setup Assistant got stuck on the "connecting" page during registration and stayed like that for an hour. I had no choice but to cancel and disconnected -- and that froze for another 20 minutes. So, I closed the assistant and rebooted... and now I don't know how to load it up again. Can anyone fill me in on where to find the assistant or how to get it to pop back up again?
Much appreciated. Thanks.

Weird. Well, I did the upgrade only -- just installed the OS on top of the old one, preserving all files and settings. Everything seems to be running smoothly, except for the fact that I can only connect my iMac and MacBook via wireless and not over ethernet cables, but I'll worry about that later. What irks me to no end is that I can't set any preferences for the folders in the dock. On the iMac I can view them as STACK or FOLDER. Right now they're set to stack and there are no other options. I find the stack ugly and prefer folders. When I hold down, I only get:
Sort by > Name/Date/Kind/etc
View as > Automatic/Fan/Grid
Remove From Dock
Show In Finder
Open "[folder name]"
On the iMac I have a plethora of options. Any idea why this would be?? I feel like I've gone insane with no valid explanation. I can't even reinstall. Now it says I have no room left -- which makes no sense at all.

QUESTION: How to re-register setup billing/payment account without losing installed apps?

Unable to buy anything on my Touchpad app catalog. Error PMT03043 when trying to buy. How to clear existing catalog account and set it up again - hope this solves the problem ? There's no billing info set up in the existing account. App catalog does not allow to set up billing/payment info later if not done the first time.
Post relates to: HP TouchPad (WiFi)

Try these steps to remove the billing acct.
Open App Catalog > application menu > Preferences & Accounts.
In Password Is Required, select one of the following:
Once every 4 hours:You must enter your password the first time you make a purchase. If you make any other purchases within 4 hours, you don’t need to enter your password again. After 4 hours, you must enter your password again for the first purchase, which starts a new 4-hour clock.
Every Purchase: You must enter your password for each purchase, regardless of the time interval.
Under Send Email, change the email address to which receipts are sent.
To modify or remove an account, tap the account name.
Enter your HP webOS Account password and tap Submit.
When the credit card information appears, do one of the following:
Tap the information you want to update, make the change, and then tap Submit.
Tap Remove Account and then confirm the deletion.
Once removed, setup the billing acct. again.
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/touchpad/touchpad/wifi/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

How do I start Setup Assistant to activate cellular service

How do I start Setup Assistant to activate cellular service

Install the latest version of iTunes on your computer, insert a new SIM from your carrier, then connect the phone to iTunes and Restore it. Unless it is a Verizon or Sprint phone; then call the carrier to activate it.

I receive a lot of emails when i start to setup the account . How can i deactivate this option ?

i receive a lot of emails when i start to setup the account . How can i deactivate this option ?

I opened settings and selected mail,contacts, calendar option
but on my iPhone 4 (v 6.1.3) I did not see that option.
Does anyone else have any ideas how to fix this? Thanks.

HT201269 Best Buy started the setup assistant on my new iPhone 5 and now I can't make it sync with iTunes. How can I reset and start over?

I bought an iPhone 5 at Best Buy, and they started the setup assistant process. Now I can't go back and start over so I can sync my phone to my iTunes account. I have an old iPhone 3GS and didn't use the iCloud. I backed up to my computer. And now I can't reset my iPhone 5 to sync to my iTunes.
Help.

I purchased a iPhone 5, and after completing a backup of my old iPhone 3GS, I in error selected Set Up as a New iPhone in the Setup Assistant.
I connected to iTunes and did a Restore iPhone, which set the iPhone5 back to factory defaults, and I was able to restart the Setup Assistant, and following the apple support instructions, restored from my 3GS backup and synced with my iTunes account. The Restore kept my phone number intact.
I was worried that I would lose the setup of my phone number that was done in the store, but everything worked perfectly.

HT204053 I setup an apple id using my gmail email address from my iphone and then I decided to change my email to icloud. So I setup an icloud email account. Now I want to change my apple id to my icloud email account, but it wont let me. How can I merg

I just got an iphone recently and I started my apple id using my gmail email address. I decided to change email from gmail to icloud so I setup an icloud email account and now I have two apple id accounts. All my primary information is in the gmail apple id account and i just want to merge the two together. I've tried changing the apple id on the main account to the icloud email, but it says it already exists. How can I merge these two accounts without deleting one or the other?
Thanks
pallhues

You can't merge iCloud accounts.
You could move all your calendars contacts etc over from the account you don't want to the one you do, it's not simple but about all I can suggest.

How do I start iTunes with whichever iTunes library I want?

How do I start iTunes with whichever iTunes library I want?
I've created a 2nd iTunes library using the "press shift-key while opening iTunes from the start menu" method given in iTunes help. Now, when I try to start iTunes from the Quick Launch menu or from the system start menu, I get the new library--without choosing it.
Otherwise, the new library works as I'd hoped. By turning off "Copy files to iTunes Media folder when adding to library," I'm able to use "Add Folder to Library" (where the folders are in the 1st iTunes library) without using more disk space for the 2nd library. So far, it works just fine for CDs and movies. I'm anticipating an iPad which can hold much less than my iPod Classic.
I have the latest iTunes (10.2.1.1)

A solution found!
I found where Apple addresses the question. Actually, I had tried this before I found Apple's answer and before I asked the question here and I didn't get it to work. I finally have it working, but the Apple answer is missing a step--or so it seems.
Locating Apple's answer:
From the iTunes window,
Help > More resources > iTunes Support Website > iTunes Library and Backup > iTunes Library >
How to open an alternate iTunes Library file or create a new one.
Apple quote:
1.If iTunes is running, quit iTunes.
2.If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
3.If you are using the Mac, open iTunes and immediately hold down the Option key.
4.You should see one of the following screens:
End quote.
As it says, you get a prompt to: Quit or Choose Library or Create Library.
I created my new library by choosing "Create Library" and expected to be able to use "Choose Library" later. So, when I clicked "Choose Library," I got a new window that's titled "Open iTunes Library" (it looks a lot like a Windows Explorer window). I selected (on the sidebar) the old library, clicked "Open" and nothing happened. The problem is likely my inexperience with this type of issue, but, still, the solution seems hokey.
After too much screwing around and a 24oz beer, this is what's working:
1. If iTunes is running, quit iTunes.
2. Hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes. (You don't have to have the shift key down until just before you click the last "iTunes.") Don't release the shift key 'til the prompt comes up.
3. The prompt is: Quit or Choose Library or Create Library. Click "Choose Library."
4. When the "Open iTunes Library" window comes up, click the desired iTunes library on the sidebar. (Mine are named "iTunes" and "iTunesIPad.")
5. Then, you'll see a list of items in the right pane. Find the file named "iTunes Library.itl" and click it.
6. Now, with both the iTunes library name selected on the sidebar and the "iTunes Library.itl" file selected in the right pane, click the "Open" button.
7. iTunes will come up using the desired library.
8. Using iTunes from the Quick Launch menu or the desktop will bring up the same iTunes library again, even if you shut down your computer.
9. When you want to change the iTunes library in use, start at step 1.
Nice about this, is that I would only have to get into the "iTunesIPad" library if I need to add something to it from my regular "iTunes" library or I want to sync to the iPad. Most of the time, I'll use my regular 185GB "iTunes" library (even here, I deselect many movies so that I can sync the library to my iPod).
Caution:
I must add the warning that I'm doing this because the iPad (that I don't have yet), won't hold even half of what I have in my iTunes library. At this point, the "iTunesIPad" library will take up very minimal disk space since it's using pointers to the regular library rather than copies from the regular library AND it's easy to switch between libraries only when needed. I can't say that this will all work until I try more setup work and I actually use it with an iPad. If someone knows that this is going to cause problems or if they have a better idea, I'd sure welcome comment. BTW, before trying this, I restructured my iTunes library (File > Library > Organize Library > Reorganize files in the folder "iTunes Media.") to bring it up to date and then backed it up on an external drive. The website "iLounge" has an article about the old and new library structure.

How do I start over with my mac book pro

I used disk utility and found my hard drive to be corrupt. How do I start over and clean this up?

Backup your Users data off the computer to regular storage drive (not TimeMachine), hold c boot off the 10.6 and use Disk Utility to Erase with Zero the entire drive of everything, this will map off any bad sectors and if you have enough spares, the drive shoudl work fine again.
Reinstall OS X, setup with the same user name, Software Update until clear, install your programs from fresh sources and return files from the storage drive, don't use TM to restore it's also corrupted image, just have to start all over again.
Read more, especially the section about bad sectors
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/docs/DOC-3045
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/docs/DOC-3172
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

How do I start up an iMac G4 on an external Firewire hard drive using Tige?

How do I start up using Tiger from an external Firewire hard drive? I have a 1 GHz iMac G4 with 768 MB RAM. The hard drive failed last week. I don't want to buy and install a new hard drive for the iMac G4. I have access to an Intel based iBook and a brand new copy of OS X 10.5 (Tiger) which I can use to install the copy of Tiger on an external Firewire hard drive that I have that's not being used. What are the steps for installing Tiger on the external Firewire hard drive and then using that external drive as the startup disk for the iMac G4?

Hi
Attach the external firewire drive to the iBook, launch Disk Utility and erase the drive use Mac OS Extended as the format type. Insert the Installer Disk, restart the iBook and hold down the 'C' key. Progress through the usual setup assistant prompts until you get to the point where you select the destination disk. You should see the external firewire disk. Select this and carry on with the installation. When the install is done, restart the iBook and verify you can boot from the drive. You can proceed with the Setup Assistant and create the default User Admin account if you want, or you can quit, shut down the iBook and disconnect the drive.
Next attach the drive to your iMac, switch on your iMac. The mac should find for itself the first bootable system it 'senses'. It should boot thereafter. You could forego this and simply attach the drive, boot the iMac and hold down the alt key. This should bring up startup disk manager which should show any or all valid bootable systems. Select the one you want and click the right hand arrow.
Tony

How to reduce downtime for setup table

Scenario u2013According to system data, Setup table will normally take 5 days to fill but client agreed only for max 2 days downtime. User can do change only last 3 month documents not before that. For filling 3 month data in set up table 1 day required so I have to mange options accordingly.
Datasource u2013 2LIS_13_VDITM -> DSO u2013 ZBIllIG ->Info cube
I have to Reduce Downtime for Setup table so planning following optionsu2013
1.     First run the info package for Initialization without data transfer. Then start filling setup table without blocking the User. In case Users changes any document at the time of filling setup table then these changes will move to delta queue. Once setup table filled then execute full repair request and then Delta info package.
2.     Early delta initialization u2013 no idea how to perform steps.
Please share your views with detail steps.
OLI*BW doesnu2019t have any date range in selection criteria so manually I will find out document for particular dates and use these document range.
Checked lot of post in SDN but still expecting final answer to go ahead in Production.

Hi ,
Your requirement is Billing ODS and Cube - Reset up in R/3 SYSTEM & Initialization in BW SYSTEM .
Before starting find the previous data load volume and size.
1.Go to LBWG application value=13 (Always Schedule the job in the back-ground mode)
2.Verify using tcode u2018SE16u2019 that there are NO records in u2018MC13VD0ITMSETUPu2019 table after above delete job is complete.
3.Suspend the process chain job in BW.This is to avoid it getting kicked off while the reload process is still in progress.
4.Need to check LBWQ in R/3 system for MCEX13, unprocessed Outbound queue (records). This should be empty as the last delta would have processed all.
5.Delete the initflag in BW.
6.Need to check RSA7 in R/3 SYSTEM to verify that there is NO record for 2LIS_13_VDITM    (to be done right before the Setup job).
7.Create New Info Package for Info Source '2LIS_13_VDITM' for u2018Initialize without Data Transfer Optionu2019 .Execute the package.Re-establish the Delta processing flags in R/3 and BW for the Billing TD load .
8.Save the record count for table u2018VBRPu2019 using SE16 right before the setup job.
9.Schedule Billing Data Setup Job 'OLI9BW' in R/3 SYSTEM .
10.After the Billing Setup job is complete in R/3 system, get the record count of table u2018VBRPu2019 again using u2018SE16u2019
Expeted time in R/3:5 to 7 hrs(setupjobs)
Expeted time for init and fullload : 6 hrs
ODS activation : 3hrs
Cube and with agrregates fill all : 8hrs.
Thanks,
naidu.

HT1766 my ipad is disabled how do I start it all over by connecting it to itunes on the computer im having problems

my ipad is disabled how do I start it alll over by connecting it to itunes on the computer

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT204053 How do I start a cloud service ?

How do I start a cloud so I can hear my music from anywhere

You would have to delete your current iCloud account from your phone "Settings > iCloud > Delete Account" in order to setup and use your old iCloud account for all the iCloud services again.
Of course you could also add your old account only for Mail as a secondary account in "Settings > Maiil, Contacts, Calendars > iCloud" and continue using your new account for all other iCloud service, but I assume that you prefer option 1.

How do I start or setup a Wi-Fi account on my iPodtouch ver5.0 ?

Similar Messages

Maybe you are looking for