How do I start over with passwords?

On my old Mac Mini I knew my Apple ID and never had problems.
Now I have a new Mac Mini, it seems that I have different passwords for different tasks. 
I had to create an iCloud password, which I don't remember.  I have to keep changing my Apple ID password because if I remember it on my new Mac Mini, I forget it on my iPad.  Then of course if I change it using my iPad, I have to remember that one when using the Mac Mini, and on and on it goes.  (Of course, writing them down would help but that's too simple.)
I would like to start over with my passwords and scrub the old (i.e. current) ones completely.  It feels like I'm forever enterting passwords and I can never tell which one it wants. And why can't my Apple ID password be the same as my iCloud password?  Then I'd find it easier to remember; or it wouldn't be so bad forgetting just one instead of two.  The whole thing gives me a headache.
Jane
Los Angeles

The iCloud and Apple ID password can be the same. Mine are.
iCloud: Account troubleshooting
Creating an iCloud account: Frequently Asked Questions
Just make them the same and then go to all your devices and sign out and sign back in with the new password.

Similar Messages

  • How do I start over with my mac book pro

    I used disk utility and found my hard drive to be corrupt. How do I start over and clean this up?

    Backup your Users data off the computer to regular storage drive (not TimeMachine), hold c boot off the 10.6 and use Disk Utility to Erase with Zero the entire drive of everything, this will map off any bad sectors and if you have enough spares, the drive shoudl work fine again.
    Reinstall OS X, setup with the same user name, Software Update until clear, install your programs from fresh sources and return files from the storage drive, don't use TM to restore it's also corrupted image, just have to start all over again.
    Read more, especially the section about bad sectors
    https://discussions.apple.com/docs/DOC-3044
    https://discussions.apple.com/docs/DOC-3045
    https://discussions.apple.com/docs/DOC-3046
    https://discussions.apple.com/docs/DOC-3172
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • When I downloaded firefox someone else's bookmarks and homepage are there, it is a used computer. How can I "start over" with firefox?

    I have tried deleting firefox from my computer entirely (I have a macbook). Then when I download it again, much later, it still acts like it knows what bookmarks and homepage I want. These were obviously set by someone else, and I want it to be fresh, I want to start over with a new firefox. I bought the computer used, and apparently firefox recognizes it as having been downloaded before and automatically adds stuff to it. It is annoying!!

    The simplest method will be to create a new profile and delete the old one. User information such as bookmarks is stored in a profile folder. You can create and remove profiles by using the profile manager. First use the profile manager to create a new profile, then use it to delete the old profile.
    For details on using the profile manager see the [[managing profiles]] article. An alternative site that can help is http://kb.mozillazine.org/Profile_Manager

  • How do i start over with my time machine

    My time machine has run out of space, and i want to start backing up 3 computers (up from 2), so i think it makes to just start over. How do i do that? Will it impact my Time Capsule's ability to be the main router for my home network (will I have to set that up again too?)? With 3 machines, should I get a 1TB (I have 500 GB)?

    Are your backups on the Time Capsule?  If so, you have a couple of options:
    Erase the TC's hard drive (see To erase everything on the Time
    Capsule’s internal disk in #Q5 of  Using Time Machine with a Time Capsule), and let Time Machine start over on all 3 Macs (one at a time, connect via Ethernet if at all possible -- the first full backup will be 2-3 times faster than WIFI).
    Connect a USB drive to the Time Capsule's USB port, and back the new Mac up to it, instead of the internal HD.  See #Q2 in the same link.

  • How do I start over with my album covers...?

    I have some album covers on my itunes but I want to get rid of them all and start over. How do I go about deleting the current album covers in itunes? Thanks

    Krish97,
    In iTunes, select the song, choose Get Info, click the artwork tab, click on the album art and click the Delete button.
    Nikki

  • How do I start over with Inventory

    We're running Zfd 4.0.1 and using Sybase on NW6. My question is this:
    I want to simply get rid of all inventory data and start recollecting
    inventory data from scratch. How can I do this?
    Thanks.
    -Marc Johnson

    Marcus Breiden wrote:
    > On Tue, 22 Mar 2005 22:06:22 GMT, John Sposato wrote:
    >
    >
    >>I have looked on the CD and I can't find the blank versions of the
    >>Sybase db on their. I see the MSSQL and Oracle directories, but no
    >>Sybase. Where should I look?
    >
    >
    > hmm... don't know right know.. also don't have a cd handy... sorry...
    > perhaps easier just to reinstall.. I know that there is an answer somewhere
    > in this forum but I can't find it right know..
    Marcus-
    I think I found it here:
    http://www.novell.com/coolsolutions/...s.html#3006698
    Emptying the Inventory database and starting fresh
    Question: How hard is it to empty out my Inventory database and start
    fresh? I'm using a Sybase database -- is there anything I should watch
    out for?
    Answer: You can replace the database with empty files from the
    installation CD (or wherever you have the original installation files).
    Try this:
    1. Shut down the Inventory services on the server.
    2. Extract (with PowerArchiver or Winzip) Installer.zip that you can
    find in folder \zenworks\sfiles\InstallerData\ on the ZFD-installation cd.
    3. Browse to
    \R_\Test\prometheus\Bogus\zenworks\Products\RMInv\ Database\Sybase\
    and unpack InvDB_zg_ia_sf.jar.
    4. Copy all extracted files to \ZENworks\Inv\DB\ on the server. Replace
    existing files.
    5. Start the services with mgmtdbs.ncf and startinv.
    If you need an empty NAL.DB it is in NalDB_zg_ia_sf.jar.

  • How do I start over with the time capsule.

    ok here is it goes.  Just moved into a new house and installed a new imac with sonos (3) play fives.  The power has gone out a few times and tehn my sonos looses its connection. (frustrating) so the other day I had to reset the sonos and now it will not find the shared drive even though it is there.  The geek squad set up my timecapsule and I am frustrated trying to figure it out.  It would be easier if I redo the whole thing myself.  I do not want to lose my info (music on the HD) just tear down the network and redo it so I know how the heck to fix things when needed.

    Any info on the TC is not touched by any reset you do.. the disk will need to be erased which is only done as a deliberate action. Plug in the TC by ethernet if not already, and hold down the reset button. Wait about 10sec and it will do a reset. If you press the button for only 1sec it will reset the passwords to default for 5min, and that may give you access. But nothing you do will wipe the drive.
    Give it a go and learn.. that is the best way if you have the time and patience.

  • HT4915 How to I completely delete my music in iCoud so I can start over with new play lists? I get the message that my files aren't  music files. Can I see what is in my iCloud file?

    How to I completely delete my music in iCoud so I can start over with new play lists? I get the message that my files aren't music files. Can I see what is in my iCloud file?

    Thank you Csound1, ok I guess I did manage to delete it but now when I copy new mp3 files they come as mpeg and iCoud won't accept them? Why? Do I have to convert them all now or can I set it somewhere to take them as mp3's. Appreciate the help. Have a great day! Cheers Steve

  • Steps to start over with time capsule?

    i need to start over with time capsule, completely.  what are the steps necessary to do this?
    erase the TC (I can see how to do that)
    remove from Time Machine list (i can see how to do that, too).
    reset to factory defaults?  would that clear name and password.  do they get reset to something?
    is this step necessary.
    what else is needed?

    On an iPad or iPhone.....
    Tap Settings on the home screen
    Tap WiFi
    Under the heading of Setup a new AirPort Base Station, Tap Time Capsule
    The setup wizard will guide you through
    On a Mac running Lion, Mountain Lion or Mavericks
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Other WiFi Devices
    Click Time Caspule
    The setup wizard will guide you through

  • I have two Apple ID's and one is used for my iPhone, but I want to start using a different one. Will my library still retain the apps I bought or should I start over with a whole new iTunes library?

    ^^ that's the question... Want to delete the current and start over with the one I've already created, but want to keep all my songs and apps. Is it possible?

    You can have apps and music from multiple IDs on your computer or your phone, but you will need the password for each one to install updates or to reload the content. You cannot merge the content from one ID into another, however.

  • How can I start anew with Photos and clear the (minimal) stuff it has uploaded

    I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
    more than I have-and of course it got stuck there, like it has for the last week.
    I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So  i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    <Re-Titled By Host>

    How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    It is hard to say from your post, why the migration did not succeed in your case.
    by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang?  Or did already the upgrade to the Photo Library fail?
    If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
    Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
    To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions.  (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
    If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
    Can you launch Photos at all?  If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

  • I want to delete my old account: simon@s.dk and start over with my correct email-account: simon@fonsbo.dk, but every time, I try to by a plan or get a new membership, the site tells me, that Creative sui is not available in my country, the democratic repp

    I want to delete my old account: [email protected] and start over with my correct email-account: [email protected], but every time, I try to by a plan or get a new membership, the site tells me, that Creative sui is not available in my country, the democratic republic of Congo!!!!, but I live ind Denmark. Hoew can I buy, and how doo I change my Adobe Id in my CC desktop. Ive tried for several days, but no matter which membership, I ask for, the answer (congo is the same. What to do???

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

  • I've really stuffed up the installation - how do I start over?

    This is turning into a nightmare. I purchased CC the other day and couldn't download any apps - I got the Download Error message that several other people have referred to. I read a few forums, tried verifying my address, logged out and in again etc etc, no luck. I couldn't download any apps: a Launch Application box would pop up saying "This link needs to be opened with an application." I'd select "Send to CreativeCloud URIHandler" and nothing would happen - I just went back to the original Download Error message.
    I decided to uninstall Creative Cloud and AAM and start from scratch, but somehow I have even managed to muck that up (probably by dragging it to the Trash rather than using the uninstaller). Now I can't reinstall Creative Cloud! I click on Download and it goes to a "Problem loading page" tab: It says "FIrefox doesn't know how to open this address, because the protocol (aam) isn't associated with any program. You might need to install other software to open this address". I have tried to fish AAM and CC out of the Trash - maybe I've put them in the wrong place?
    I just want to start over with a clean slate: grateful for any advice on how to do this. Otherwise I think I'll just cancel my membership (I can't even do that right now as I'm in the wrong time zone) and come back to this when I've calmed down a bit...
    Thank you.

    Run the Creative Cloud Cleaner Tool and fix your browser MIME-types/ protocol handlers by reinstalling it as well.
    Mylenium

  • HT1329 My old computer crashed and I had to get a new one.  I was unable to save anything from the old computer.  Is there anyway to get my music from my Ipod to my new computer without having to start over with the old cd's again

    My old computer crashed and I had to get a new one.  I was unable to save anything from the old computer.  Is there anyway to get my music from my Ipod to my new computer without having to start over with the old cd's again

    Hello cheech07,
    The following article contains directions that can help get you back on track with iTunes. I'd recommend picking up at 'Part 5' of the 'External drive' section.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Cheers,
    Allen

  • My files are a mess - how can I start over in iTunes?

    Over the years, my music files have become scattered all over between different locations on my internal drive and various externals. I have tons of duplicates, lost files, and it's just a general mess.
    I would like to do a search for all my music files, and completely start over with iTunes and keep them on my MacBook Pro. I have room on my internal (or would, if they were oranized properly and I got rid of duplicates!) but a lot of the files that show up on iTunes are on an external so of course it will ask me where they are. This is driving me crazy and I want to just scrap everything and start over fresh.
    I have a 1TB external that I can dump them all on while I change over.
    Any suggestions on the best way to do this would be welcome, as well as whether there are programs available that would help with this (or is it just as doab;e without a separate application).
    TIA, Alicia Morgan

    Alicia Morgan wrote:
    Over the years, my music files have become scattered all over between different locations on my internal drive and various externals.
    basically, the question is: does iTunes know where all these files are ? or does iTunes show a "!" next to any files ?
    I have tons of duplicates ...
    _*How to find and remove duplicate items in your iTunes library*_
    _*http://www.araxis.com/find-duplicate-files/ (free trial)*_
    _*http://dougscripts.com/itunes/itinfo/dupin.php (commercial)*_
    ... lost files
    see
    iTunes Track CPR v1.3
    This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."
    or
    _*Music Folder Files Not Added v2.0*_
    This application will list the file paths of the files in your designated "iTunes Media" folder which are not in iTunes' library. Additionally, you can select a different parent folder and its contents will be compared to the iTunes library. Options to Add a selection of found files to iTunes or move them to the Trash.
    ... completely start over with iTunes and keep them on my MacBook Pro. I have room on my internal (or would, if they were oranized properly and I got rid of duplicates!) but a lot of the files that show up on iTunes are on an external so of course it will ask me where they are.
    once you have gotten rid of dupes and located the lost files, you could consolidate your library:
    (a) go iTunes > preferences > advanced and make sure
    o iTunes media folder location is pointing to the iTunes music folder on your startup disk
    o +keep iTunes media folder organized+ is checked
    o +copy files to ... when adding to library+ is checked
    (b) have any external HD holding any of your media files is mounted on your desktop
    (c) go file > library > organize library > consolidate files
    if the option to +upgrade to iTunes media organization+ is available, select that too.
    JGG

Maybe you are looking for

  • Restricting Purchase order for a particular material type

    Hi All, How do I restrict a purchase order document type to be created for a particular material type. For eample PO document type NB should allow to create for materials with the material type ROH only and restrict the other material types by issuin

  • How do I get to open a access's form with LabView?

    I know as to send data to access´s table. Now,I would like to open a access´s form with LabView using activeX or other tools. I would like to receive, if possible, a v.i. as example. Thank you ...

  • Mapping exception in XI :Cannot produce target element

    Hi All, This is for RFC-to-JDBC Scenario. I import an RFC from SAP for Vendor Master ( BTE Event : 00001421). In that there are tables and structures. When i create a Vendor in transaction XK01, if i dont fill any of the values in structure WYT3, it

  • Firefox can't seem to save sent emails in the "sent" box

    Have sent two emails today - neither will get saved in the sent box and I get an error message saying:- "There was an error saving the message to Drafts. Retry?" But I wasn't trying to save the email to "drafts" - I don not know if the actual email h

  • "Simon2.java:37: cannot find symbol

    Im coming up with this error. Does anyone know what I'm missing. Thankyou for any response "Simon2.java:37: cannot find symbol symbol : method getPane() location: class Simon2 Container pane = getPane(); ^ 1 error" public Component createComponents()