How do I start/stop a slide's animation?
One slide of a slideshow I'm making I want the animation to end after it's completed without looping. I can do this by adding the stop(); command into the last frame of that slide, but if I return to that slide, it will remain in the end position instead of replaying. Is there anything I can do about this?
When I start up Flash, there's a box immediately to the left of the workspace. It doesn't actually have a title, but has a + and - at the top. Inside the box, there's a thumbnail with the word "presentaion" next to it. I right click on that, hit "Insert Screen", and a box appears under it branched out with the basic name of 'slide#'. These slides are what I'm making my slideshow across.
The buttons in my slideshow advance to the next slide, seemingly the exact same function as the left/right arrow keys. I didn't actually code it myself since I don't understand Actionscript too well yet, I used the Behaviors window and selected Screen > 'Go to Next Slide' (or Prev Slide). The code that it generated for the Next Slide Button is:
on (release) {
// GoTo Next Screen behavior
var screen = null;
var target = this;
while((screen == null) && (target != undefined) && (target != null))
if(target instanceof mx.screens.Screen)
screen = target;
else
target = target._parent;
if(screen instanceof mx.screens.Slide)
screen.rootSlide.currentSlide.gotoNextSlide();
// End GoTo Next Screen behavior
Similar Messages
-
CF8 dev edition - how do you start / stop server?
mac osx - CF8 dev edition - how do you start / stop server?
I would like to turn off CF8 auto start on boot up and
manually be able to start and stop the server...
Q: How do I set this up?> Now, I am also interested in turning off CF8.01 "auto
start on boot up"
> (currently set to that now)
>
> Q: How do I turn this auto start off?
>
> Hi folks - I'm still interested in setting the CF server
on MAC OSX 10.5 to
> *NOT* Auto Start - How do I turn this auto start off?
I googled "cf8 osx don't autostart", and turned up this:
http://www.feed-squirrel.com/index.cfm?evt=viewItem&ID=96307
Does that make sense? It's all a bit Greek to me because I've
not used a
Mac for...
crikey...
TWENTY YEARS.
Adam
(suddenly feeling rather old) -
How to adjust Start/Stop position of a song on the iPhone (not iTunes)?
Hello all,
Before I caught my flight today, I decided to make a ringtone of my new favourite song. Obviously one of the steps in doing so involves selecting a specific start and stop position within iTunes be fore creating the ringtone.
So I got on the plane and realised that I didn't remove the start/stop positions on the song after creating the ringtone. Now i'm stuck with only a 40s interval being able to be played!
Please tell me there is a way to change the start/stop position of the song within the actual iPhone as I won't have access to my iTunes library for quite some time!
Any help appreciated.
Regards
iPhone 3G2 32bg, 3.1.2No
-
How to check/start/stop hardening Service?
Dear All,
I want to check on Solaris 10 whether it has hardening service or not, and also want to start/stop this service.
Please give any idea or advice.
Thanks and regards,
HengHi Heng,
System hardening requirements changes from environment. So It should be designed to suit your infrastructure. The topic is too big to discuss here.
I will give some examples of major things done in hardening.
User level Security.
1) Password complexity
2) Restrict multiple login attempts.
3) Log all failed login attempts
4) configure pam module
5) Use RBAC to deligate
6) Restrict root login to console only.
7) disable passwordless logins to any users
8) disable services like rsh rlogin and related services and restrict access through ssh only.
9) ENABLE & Configure BSM
10) Enable Auditing
11) disable/lock all unused system accounts.
12) enable password encryption (/etc/shadow)
Network Security
1) Disable all unwanted services. (svcadm disable service on solaris 10)
2) disable unused nonsecure services like telnet, ftp etc.
3) tcpwrapers (restrict the network communication to the required subnets only)
4) disable unwanted inetd services
etc etc etc... discussed very few things from the normal hardening, and these things vary from environment to environment.
Regards
JKGN
Edited by: 878434 on May 25, 2012 1:16 AM -
How to implement start & stop ai triggers when # scans unknown
I can't seem to find an implementation example for this application.
Some are close but seem to have a big gap on close examination.
The application is to log an unknown number of samples for a
single rotation of a variable speed drum. The drum is connected
to a tachometer which generates 1 pulse per revolution and is the
trigger source.
The user will initiate the data collection and only a single
rotation's
worth of data need be collected and displayed.
The board is a PCI 6111E sampling a single input at ~2 Megahz.
All the examples I've found using a start and stop trigger depend
on knowing how many scans to acquire.
Is there any way to get around that? It seems so simple to
have a
start and stop pulse, a scan rate constant, and just get
the data out of a buffer. But it does not seem to be that simple
or am I missing something here?
There is also an issue with the identical tach signal being used
for both the start and stop trigger. I think that can be gotten
around by using a divide by n counter and feeding that to
trigger config vi but if anyone has any suggestions for that,
they would be greatly appreciated.
Gene CouchI'm afraid I can't help you beyond that. We use NI boards and NI-DAQ library
of functions in custom control systems with software written in C++. I have
not had opportunity to use LabView. Sorry.
gcouch wrote:
>On 5 Jun 2000 09:38:46 -0500, "J. Wolters" >wrote>Thank
you for the response but I'm not sure what the DAQ_Rate function>is. With
LabVIEW 5.1 it does not appear in the DAQ pallette and I>cannot find it in
the example vi's. Do you know where it can be>found?>>>>>>Have you looked
that DAQ_Rate function? You should be able to use this function>>to obtain
your # of samples.>>>>>>gcouch wrote>>I can't seem
to find an implementation example for this application.>Some>>a
re close but
seem to have a big gap on close examination.>>The application>>is to log
an unknown number of samples for a >single rotation of a variable>>speed
drum. The drum is connected>to a tachometer which generates 1 pulse>>per
revolution and is the>trigger source.>>The user will initiate the data>>collection
and only a single>rotation's>worth of data need be collected and>>displayed.>>The
board is a PCI 6111E sampling a single input at ~2 Megahz.>> >>All the examples
I've found using a start and stop trigger depend>on knowing>>how many scans
to acquire.>>Is there any way to get around that? It seems>>so simple to>have
a start and stop pulse, a scan rate constant, and just>>get>the data out
of a buffer. But it does not seem to be that simple>or>>am I missing something
here?>>There is also an issue with the identical tach>>signal being used>for
both the start and stop trigger. I think that can>>be gotten>around by using
a divide by n counter and feeding that to>trigger>>config v
i but if anyone
has any suggestions for that,>they would be greatly>>appreciated.>>Gene Couch>>> -
How to implement start & stop triggers when # scans unknown on ni5112?
I want to initiate a data capture trigger on the leading edge of a pulse & then stop the trigger on the next leading edge of the same pulse, using NI 5112 Scope card & LabVIEW v5.1. How to accomplish?? Any help appreciated!
You can implement a start and stop trigger but not with an arbitrary number of points.
The 5112 has two triggers the Acquisition Arm and the Record Arm.
The Acquisition Arm trigger enables the Scope to start taking pretrigger data.
The Record arm trigger is often call the Stop trigger or Reference Trigger. Based upon the Reference Position the board will acquire X pretrigger samples and Y post trigger samples. The Reference trigger defines the transition from pre to post trigger. If you set all of your points to be pretrigger (i.e. 100% reference position) then the Reference trigger will stop acquistion on the trigger. One thing to note: the scope will not be ready to accept the record trigger until it has acquired all the pretrigger points. The scope
will only return one record size of data. Therefore the first samples will be lost.
For example I would like to start a acquisition with a trigger on PFI 1 and use edge triggering on channel 0 to stop the acquisition. I need at least 1000 points.
You will need to make the following changes in the code. Start from the niScope EX Configured Acquisition.vi and set up the triggering for Edge Trigger. Set your minimum record size to 1000 samples. On the diagram go to the Edge Trigger Case of the Triggering Selection Case Structure add a property node before the configure edge trigger similiar to the attached screen shot. Change the property to Acquisition Arm Source found in the synchronization menu. Change the property to write and create a string constant. The available sources for the Acq Arm are PFI 1,2 and RTSI 0-6. The syntax needs to match the following: "VAL_PFI_1". You will miss the edge trigger if you have not already acquired 1000 samples from the acquistion trigg
er and you will only get back 1000 samples.
Good luck and let me know if you have any questions.
Mike Taylor
Attachments:
acqarm.jpg 66 KB -
How do I start, stop and restart a sequence with a periodic input?
Hi,
I have written some code that will monitor my com port (rs-232) continuously for an ASCII character (in this case a 'P'). When the P is received, I want a sequence structure to start working. The P will only appear once for a short while, but the sequence should carry on running until it finishes all the frames. On the next time a P appears on my monitor, I want to either stop the sequence structure regardless of which frame its in and restart the sequence from the beginning again or to run the sequence from the start again if it has already completed all the frames.
What sort of structure do I need to do this, are there any examples?
JamesJames,
Indiana is correct, my take on this is similiar.
If you have a 3 element sequence structure for example which runs if 'P' is returned from your COMs thread, you will need to query a variable in each element of the sequence in order to suspend execution of the next/remaining elements in the sequence if this event occurs. You can do this by reading the variable that your COMs thread sets using a case structure in each element of your sequence. In order to re-run your sequence if 'P' is returned during the execution you can simply set the suspend variable and ensure the code is in a while loop to recall the code.
See the attached example code/screen shot:
This is however not an elegant solution and the best way would probably be using the events structure and a user event to queue the P events. This is available in 6.1 but I believe its the professional package. See also my implementation using this method, again attached below:
Hope this helps,
Kind Regards
Steven Bird
Applications Engineer
National Instruments
Attachments:
Example.JPG 194 KB -
How should I start, stop or restart SQL services if it is in a cluster?
Hi,
For migration purpose I need to stop sql server services in a cluster. I don't want to failover the cluster I just want to stop the sql server services before the windows system admin shutdowns the windows server and later start again once migration is done.
This is clone migration so I don't have to do anything except stopping and starting the services of sql. I found two places there to take service offline and online, one is just clicking the services and application and in the right hand side directly right
clicking the instance and take service offline, another is expanding the instance and taking offline agent and sql server service one by one.
I don't know which is the way.
Please some one help me.Hello,
You can use SQL Server Configuration Manager, SQL Server Management Studio, Cluster Administrator.
Do not use the Services applet in Control Panel.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How do I Start/Stop Loadmovie
I have created an on loadmovie script to replace a blank
movie clip in my main movie time line. When a button is released
the external .swf file is loaded into the blank movie clip and
plays great. I want to be able to control the play back of the
loaded .swf file with a simple stop and play command. What is the
script to do this? Thanks in advance.
Bob.not quite roqueo.
Robaire, you will need to target the clip that the swf has
loaded into. So add to the code roqueo has provided (if you're
attaching it to an object) and target the path to the clip:
on(release) {
_root.the_mc.stop(); //or play();
} -
How to Start/Stop manually an oracle 9i database with a bat file?
Hi;
I have a manual Start/Stop of the db.
How can i Start/Stop the 9i database all services with a batch file (windows 2000) ?
All in one batch files ( One for Start & one for Stop)(Including listener)
thanks for your answer !Save the scripts below in a batch file and use the first one to start your services, and the second one to shutdown.
This script will shutdown your database first using SQL*Plus and stop the service later. This way you will avoid the timeout.
Also will ask you for confirmation if you are sure to start Oracle services and database. press Y for yes and N for No.
@echo off
%systemdrive%
REM #
echo.
echo You are about to start Oracle Services and Database
echo.
set /p Input=Do you want to continue? (Y=Yes N=No) =
IF /i "%Input%"=="Y" (goto Proceed)
exit /b
:Proceed
echo Oracle Instance and Services Startup in progress
echo.
Net start OracleOraHome92Agent
Net start OracleOraHome92HTTPServer
Net Start OracleOraHome92TNSListener
Net Start OracleMTSRecoveryService
Net Start OracleServiceORCL
echo.
echo Oracle ORCL Instance and Services Startup completed Successfully
echo Good Bye
echo on
EXIT /BSave this one in a seperate batch, again it will ask for confirmation, and shutdown the database using SQL to avoid timeout
Just replace the connect string with your own and the {SID} with your Database name
@echo off
%systemdrive%
echo.
echo You are about to shutdown Oracle Instance and Services
echo.
set /p Input=Do you want to continue? (Y=Yes N=No) =
if /i "%Input%"=="y" (goto Proceed)
exit /b
:Proceed
echo.
echo Closing and Dismounting ORCL Database
echo.
echo shutdown immediate | sqlplus "/ @ORCL as sysdba"
echo.
echo Shutting down Oracle system services
echo.
Net Stop OracleService{SID}
Net Stop OracleOraHome92HTTPServer
Net Stop OracleOraHome92TNSListener
Net Stop OracleMTSRecoveryService
Net Stop OracleOraHome92Agent
echo.
echo Oracle Instance and Services Shutdown completed successfully
echo Good Bye
echo on
EXIT /bTony Garabedian -
How can I fade the first slide in a slideshow in from black?
Novice user here, but I can't seem to find an answer to this question. I've created a couple of slideshow, and have imported them to iDVD to burn the DVDs. When I play the show in iPhoto, they're fine. But when I play a finished DVD (or the demo of the DVD in iDVD), the first slide does not fade in like iPhoto did. It's a really jarring start. I fiddled with Ken Burns effects, but all that seems to do it effect how the slide ends, not how it starts.
How can I start the DVD slide show at black and fade the first slide in, just like iPhoto automatically did?
BTW ... haven't upgrade to the new iLife software yet if that helps.Hi DogWonder!
if it were me, I think the simplest thing to do is take a photo with the lens cover on the camera, basically a black pic. Now use this one at the beginning of your DVD/Slide Show... or even between slides for a little more drama, if you wanted...
Good luck, Rick -
HOWTO: start/stop htmldb processes in Unix
I've installed 10gR2 DB, and then installed HTMLDB from the companion CD. I could access the server no problems, so my configuration is good and working.
The issue is how do I start/stop the processes. It appears (from this forum) that Windows installs create a service but that's of course no good to me as I'm on AIX.
I'm a database guy, not an iAS guy, and it took me a while to figure out the way to make this all work.
First, set your ORACLE_HOME to the HTTP home (not the DB home).
In ORACLE_HOME/opmn/bin is the magic command:
./opmnctl startall
or
./opmnctl stopall
Seems to do the job.That's almost right - that command will start & stop the Oracle HTTP Server (Apache). If Apache is down, then there is no way to access HTML DB via a web browser. However, users - if they had access - could still access the database, of course.
There is no such thing as the "HTML DB Process", as HTML DB is nothing more than a schema in the database.
Thanks,
- Scott - -
Print to Video Start Stop recording
Hello
Ok is their any way to have FCP mark a Start Stop after each clip when recording a timeline with many clips. So that when recaptured it imports each clip in the Timeline as an individual clip.
Perhaps their is another software for this.
I have been reading the Manual back and fourth cant find out how to add start stop points. I have tried markers transitions blank space. Nothing wants to work.Thank you for your help.
Your suggestion got me to come up with a few other things which led me to what I am going to do.
I still am going to try the Adobe thing I'll let you know how that goes.
I will have a directory with markers one for each tape on a USB stick.
A black slug around 2 frames in between each clip and enough black to start off and to end with as to keep every frame.
One thing though.
The reason I was trying to do start and stop was in the event someone else needed to record the Tape but I will probable be the only one to do such. -
SAP dispatcher status is stopped in Console how can i start it
Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 21
intno 20020600
make: multithreaded, ASCII
pid 736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 21 successfully loaded
shared lib "dw_xtc.dll" version 21 successfully loaded
shared lib "dw_stl.dll" version 21 successfully loaded
shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c 12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Oct 02 07:03:48 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1500 Ended no 1 0 0
1 DIA 3796 Ended no 1 0 0
2 UPD 3548 Ended no 1 0 0
3 ENQ 1464 Ended no 1 0 0
4 BTC 3368 Ended no 1 0 0
5 BTC 3400 Ended no 1 0 0
6 SPO 2620 Ended no 1 0 0
7 UP2 380 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Oct 02 07:03:48 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c 8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 21
M intno 20020600
M make: multithreaded, ASCII
M pid 1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 02 12:32:59 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c 357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PMHi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Oct 03 11:02:36 2008 5494 0.005494
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005534
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.005560
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 33 0.005593
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 139566 0.145159
4 ETW000 [dev trc ,00000] using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000 22 0.145181
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 7 0.145188
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 13 0.145201
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000 2501 0.147702
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.147714
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 18 0.147732
4 ETW000 [dev trc ,00000] New connection 0 created 13 0.147745
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.147760
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 12391 0.160151
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.160163
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.160177
4 ETW000 [dev trc ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry 796 0.160973
4 ETW000 [dev trc ,00000] -->oci_initialize 400 0.161373
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000 34020 0.195393
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: TNS-name missing 11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE --- TWO_TASK = ''"
Thanks
Sudhakar A -
How do I select multiple albums in Revel to start/stop sharing?
How do I select multiple albums in Revel to start/stop sharing?
Hello,
You have to select each one to share the album. You can have multiple albums sharing at the same time. Please see our FAQ post "How to share photos with Revel"
http://forums.adobe.com/thread/1157995?tstart=0
For additional helpful information regarding Revel , please see our main FAQ Forum http://forums.adobe.com/community/ps.com_sharing_and_storage
Thanks
Scott
Maybe you are looking for
-
[SOLVED] xf86-intel+xorg-1.5.3 low performance
Hello, Yesterday i've updated whole arch linux distribution (pacman -Su), unfortunately after update i've discovered that pereformence of glx has fallen significantly. On glxgears i can get max 170 fps, i can't event watch SD movies on mplayer -vo gl
-
Windows Internet Explorer 7 has a Favorites feature that Firefox does not have?
The feature which I will like to see in Firefox is the ability to type a first letter of the Bookmark that I want to get to in the listing. In Windows Internet Explorer 7 favorites listing, I can easily reach the part of my favorites list by typing t
-
I want to add a new Lion server to my network.
I am at the screen asking me if I I want to setup a new server or Transfer. Right now we have a 10.6 server that is doing the heavy lifting in our network. My end goal is to use the new lion server to authenticate users, file sharing to osx and ios,
-
Want to conncet a mobile printer to IPHONE without WIFI
Here is what I want to do. I want to be in the middle of an area without any wifi access. I have a mobile printer and want to be able to get pdf files to printout. Is there any way I can just plug the phone in to the back of printer. As you can s
-
Using/updating bootable clone and Lion.
I have Snow Leopard on the default internal startup drive and Lion on an external bootable FireWire drive. This seems to work as it's meant to work. I'm using Snow Leopard to 'do things'. I put Lion on a SuperDuper! clone to try it out. The thing is