How do I stop background audio clips from playing while browsing sites?

Firefox is my default browser. I use Google chrome and Internet explorer sessions for background monitoring news site sessions at the same time. I have no problem with the other two browsers. While surfing with Firefox I get unwanted background audio clips that start and run by themselves. I cannot stop them. They run and then stop by their self. They are some sort of adware and I cannot find the source to remove them. I also get video clips sometimes that I can stop that run around the outside of the active window I am viewing. These is very annoying. I have uninstalled Firefox and reinstalled it but the problem does not go away. I antivirus software, registry change protection software, and registry cleaning software. The problem is with the default browser.
How can I locate and remove the plugin, addin or service that starts this annoying activity. I have no special unwanted toolbars installed. There is nothing in the installed programs list in the control that shouldn't be there.

I had a similar problem to this. EVERYTIME i started firefox, it would play an audio clip from a flash game i played a while ago, it would last 5 minutes before finishing. i tried the starting in safe mode, but that didn't work for me, so after that i then tried RESETTING firefox, and that has worked for me.
On another side of startup problems, firefox would also open up a new tab on startup, usually 22find.com or do-search.com. i know these are caused by a virus and have since deleted it, but it had changed a preference file in firefox causing it to continue to open on startup.
Having since done the firefox reset, i haven't had either of these problems AT ALL! would recommend this as a possible fix for you friend before trying any lengthy troubleshooting process or downloading any extra anti-virus removal software.
here's the like to showing you how to reset firefox: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

Similar Messages

How do I stop a movie clip from looping

I am using Action Script 3 and the 'stop()' function is not working to stop my movie clips from looping continuously.
I have added the 'stop()' function to the last frame on the timeline of each movie clip.
I originally built the .fla file in Flash CS6 using Action Script 2 where it was working with no problems (I have since upgraded and don't have access to CS6 anymore).
I have all the separate movie clips positioned on Frame 1 of my main stage with the following script to start them playing:
Cigarette_Reveal.play();
KickTheHabit.play();
BallMove.play();
BallFlip.play();
Offer.play();
I want each of these movie clips to stop playing after one animation sequence is complete.
Please help!

Turn on strict mode in your publish settings. This will allow you to see the compiler errors that are preventing the actionscript in your fla from compiling correctly.

How can I import "extracted audio" clips from iMovie project into iTunes?

I imported my home video into iMovie HD 6.0.1 and extracted the audio. How can I get the extracted audio clip (aiff format) into my iTunes playlist?

Genny,
I just tried to answer your question over in the iMovie forum. Have a look over there.
Matt

How do you stop multiple Youtube videos from playing at the same time?

As of a few days ago, when I click on a youtube video, as the commercial begins to play, you can begin to hear multiple/different commercials playing at the same time. After the commercials, the same issue occurs with the main video--multiple videos are being played at the same time and are not in sync. I've updated all my plug ins and have tried the suggestion posted in the forum provided in the link below in which someone else has expressed the same issue, but nothing has worked so far. Does anyone know what can be done?
http://productforums.google.com/forum/#!topic/youtube/5Lnikma4UqM

Are you loading those videos as Flash or HTML5? It is possible to prevent videos from playing until you click something with Flashblock for Flash or Stop Tube HTML5 for HTML5. You can also stop the commercials with Adblock Plus with an Easylist subscription.
* https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/
* https://addons.mozilla.org/en-US/firefox/addon/flashblock/
* https://addons.mozilla.org/en-US/firefox/addon/stop-tube/

How do I make two audio clips from different mics sound the same in premiere?

I have a video I am working on. we used two different mic and camera options. One is a lavaliere mic that was too hot and picked up a lot of fuzz, and the other was an on board mic that was just a little echoey from the office walls. I found that some clips were better on different versions. so I want to put the two different sets next to each other in video and make the sound be the exact same. That way no one notices the differences in audio.
Any help is appreciated.

Hi. Although not perfect, I'd add an audio mixer effect and adjust the highs, mids & lows on both of them to help their audio, respectively, sound more similar. Often when I shoot, my Boom mike (backup) is much fuller sounding than the lavs. are. Lavs are inherently lacking in the low end, and the boom is often too hot on the low end. So I would add Audio Mixer effect, and lower the low end on the boom slightly, and highten the low and mids just a bit on the lavs. Even taking a little highs off the lavs makes it sound a bit more like the boom.
As far as echo is concerned, you probably can't do to much about that unless you have an external graphic equalizer/limiter. Lot's of times I just add some music in the background, which helps a lot to hide echo from the mics.
Finally if you tape/record/film in a location that has lots of background noise like, background people, cars or rain or wind or general white noise "hiss", then you should record a minute or two of the location without any dialogue. This is is known as "Wala" recording. You can add a little of this to your whole track, or just on the mike track that doesn't seem to pick up the ambient sound, thus making it sound more like your other mike.
I hope this helps.

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

How to Delete several Audio clips from Video clips on Timeline of APPro CS5

I would like to know how to delete multiple audio clips from Video clips at once in time line in APPro CS5? Please advice step-by-step procedure. I can DELETE audio from a single Video clip. But I wanted to DEL Audio from multiple video clips. Your help is much appreciated. Thanks

Thanks for the advice given by Shooternz, Colin and Jim. Your help is much appreciated for a beginner like me... Jim's idea was also good..It worked for me and also safe if I need to use the original audio. Following method also found good...but previous audio clip cannot be extracted after deleting it. ... 1. Hold down "ALT" key first then select the first audio clip in the chain of video clips to Delete. 2. Hold down " Shift + Alt " keys together and click right mouse button on all audio clips to be deleted one by one. Make sure only audio clips are selected. 3. Then release ALT+Shift keys and then click right mouse button and select "Clear" from pull down menu to Delete all selected audio clips on the time line. This method works very well for me. Thanks for every one who has adviced me how to do it. Thanks guys... If u all find better method tha above...please inform us. Thx.

How do I stop Serial "VISA Read" from giving me packets instead of available bytes.

Dear Labvillians,
Highlight:
How do I stop serial "VISA read" from giving me packets instead of bytes?
Background:
I have a system that serially publishes 14 byte packets on a semi-regular interval.
At busy times, the producer of these these packets queues the data, effectively producing super-packets in multiples of 14 bytes sometimes as large as 8 packets (112 bytes).
My protocol handler has been designed to processes bytes, packets or super-packets.
My application now has multiple devices and the order of message processing is critical to correct functionality.
My observation is that the VISA read waits until the end of a packet/ super-packet before passing the data to the application code. (See Plot Below)
My expectation is that VISA read should give me available bytes, and not get too smart for itself and wait for a packet.
I have observed this on PXI, Embedded PC, cFP and most recently, cRIO
I have experimented with the cRIO's Scan interface rate, which helps with reducing the packet backlog but doesn't resolve to sub-packet byte read.
I understand that one solution is to Write FPGA code to handle it and pass the bytes through R/T-FIFO, and there are some great examples on this site.
Unfortunately this doesn't help with non FPGA devices.
I have also dabbled in event based serial reads but it is diabolical on vxWorks devices.
Any Help is appreciated
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT
Solved!
Go to Solution.

Sometimes Talking to yourself is helpful.
I hope this is a useful Nugget for someone in the future
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

How to send FCP edited audio clips for processing in Soundtrack?

Hello
How do I send just the edited audio clips from hour long files to be processed in Soundtrack from Final Cut?
I need help as I'm trying to adjust some edited audio clips in Soundtrack Pro but when I send them from FCP to Soundtrack - it opens the whole original audio file and then any adjustments I apply in Soundtrack are being processed over the whole audio file not just the short edited audio clip that I want to adjust.
Normally I don't mind as my scenes are usually short and Soundtrack analysis over the whole scenes audio is usually desirable, but this projects files have been transfered from tapes as hour long AVI files (all the tapes clips transfered into one hour long files) and every FCP edited audio clip I send is being treated as an hour long audio file in Soundtrack.
I'm sure there's a simple answer for settings but I haven't been able to find it. Any advice appreciated.
Barra

Thanks Javi, my sequence is an hour and half duration so what I'm trying to do is save processing time in Soundtrack by just processing adjustments on the few audio clips that need processing.
I have set Soundtrack to open referenced audio only and with 5 sec in and out handles, but it still imports the whole original audio file into Soundtrack timeline upto the selected clip, I then double click in Soundtrack on the clip in brackets, and it then selects just the audio clip I want to adjust, then Soundtrack will just process on the edited clip but when I 'render to action' it seems to apply changes to whole original audio file - taking longer than I want.... frustrating
Also the sound always sounds very different in FCP than Soundtrack even after 'rendering to action' and rendering in FCP... this is not the easy workflow I expect from such expensive software programs, I understood that they work together in a fully integrated way, what's the problem! This is wasting my precious time and preventing me from editing not helping me, this is a common problem and yet I can find no help in the user manual - I'm not impressed!

Editing Multiple Audio Clips From Premiere in Audition

Hi there,
I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio in Premiere but I am not able to edit the nested file in Audition after this.
If anyone has any ideas of how to work with and apply the same properties to multiple audio clips from Premiere in Audition I would greatly appreciate it.
Thanks...

Hi everyone, I also have a trouble with cs6. I just record 3 tracks in the early today, then when I got home, I saved as sexs file ( wrong decision). After that, I went back and try to open the file, it can't file the recording tracks. The only one thing still exist is my beat, what should I do to recovered it? thanks for helping me out of this.

How do I stop all the tabs from closing at once in Safari v 6.0.3?

How do I stop all the tabs from closing at once in Safari v 6.0.3?

Activate cycle mode, adjust cycle area as needed and export tracks as audio files, no?
http://help.apple.com/logicpro/mac/10/#lgcp8e5ce2d3
Or cut globally at position 2min and 3min, then mute manually regions before and after the 2 - 3 minute range, bounce and get rid of the not needed silence in the audio.
Cheers!

How do I stop my MacBook Pro from making shortcuts on my desktop when I'm moving a folder

So my question is,
How do I stop my MacBook Pro from making shortcuts on the desktop when I'm trying to move the original photo, all I want to do is move a picture from a folder on the desktop without making a shortcut!

Hi RockHazard,
If you want to change the behavior of the Finder when moving files around you can use keyboard shortcuts.
OS X: Keyboard shortcuts - Apple Support
Way down under Finder shortcuts we find:
Command key while dragging
Move the dragged item to another volume or location
(the pointer changes while key is held)
Option key while dragging
Copy the dragged item
(the pointer changes while key is held)
Command-Option key combination while dragging
Make an alias of the dragged item
(the pointer changes while key is held)
Best regards,
Nubz

How do i stop my macbook pro from syncing photos from iPhoto overtime my iPhone is connected?

help, how do I stop my MacBook Pro from automaticly syncing my photos to iphoto everytime i connect my iphone?

It just loads them it doesn't download them. So quit iPhoto.

How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012, How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012

How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas?

How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas? (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

How do I stop background audio clips from playing while browsing sites?

Similar Messages

Maybe you are looking for