How do I stop background fading on Quiz Results slide

Hi
I'm using Captivate 6 and having a whole heap of problems creating a quiz using question pools. First one - how do I stop the background fading away on the Quiz results slide? The background is from a master slide and the results slide has the settings in the screenshot attached
I've tried moving changing the length on the timeline, but this then makes the Continue button unclickable for ages. The background fades once it is clickable in Preview mode (see screenshot below)

Hello,
Please go that Master Slide and click on that image and under Properties Inspector check the "Transition" option
It should not be "Fade In" or "Fade Out", it should be "No Transition" :
Hope this helps !!
Thanks,
Vikram

Similar Messages

  • Continue Button on Quiz Results Slide NOT Working Properly

    I'm experiencing a functionality issue with the "Continue"
    button on the Quiz Results slide:
    Situation 1: After initially completing the quiz, I need to
    click the "Continue" button on the Quiz Results slide only once to
    advance to the next (and last) slide in the quiz movie. This is
    fine & works as I would expect.
    Situation 2: After initially completing the quiz, if instead
    I choose to review the quiz, later when I get to the Quiz Results
    slide, I need to click the "Continue" button TWICE to advance to
    the next (and last) slide in the quiz movie. This does NOT work as
    I would expect.
    Any idea why only 1 click is needed in the Situation 1 while
    2 clicks are needed in Situation 2? Any way to fix Situation 2 so
    that only 1 click is needed?
    Thanks much!

    CapManZ,
    Whether the Continue button on the Quiz Results slide
    requires one or two clicks is mysterious indeed. See
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1302278
    for another discussion about its misbehavor.
    Actually, the number of clicks required depends on how long
    you wait after the Quiz Results slide appears, prior to clicking
    the Continue button. In your situation 1 you probably answered
    questions rather than using the skip button, so you viewed the
    question slides for a while prior to arriving at results. In your
    situation 2 you probably used the Skip button to zip through the
    slides to return to the results screen. Try this. In situation 2,
    when you get to the Quiz Results slide, instead of clicking the
    Continue button, go get a cuppa joe and then see if a single click
    will work. If so please let me know.
    I've experimented with a Captivate 2 multiple choice quiz in
    a slide show that contained only 10 questions and the Results
    slide. I added a text caption with fade in and fade out enabled
    (the default) to the Results slide. I found that after the caption
    fades in, one click on the continue button advances the slide. So I
    used the caption's appearance to help measure the timing.
    In the tests below I skipped as rapidly as possible, pausing
    at various slides to see how it affected the single click
    threshold.
    Skip all slides: 28 sec
    View slide 1 for 60 sec and then skip: 28 sec
    Skip to slide 5, pause 30 sec, and then skip: 13 sec
    Skip to slide 10, pause 30 sec, and then skip: 2-3 sec
    Answer each slide (took more than 30 sec): 2-3 sec
    Skip all slides, click Continue as fast as possible: 2-3 sec
    I also reduced the number of question slides in the quiz and
    skipped all slides.
    7 questions: 18 sec
    3 questions: 7 sec
    I believe the threshold value (the duration required before
    clicking the Continue button advances to the next slide) is
    composed of two durations which add together to determine the
    threshold. The Result's slide's timeline probably sets the
    threshold's lower limit. Clicks prior to 3 seconds are ignored.
    Time per slide and number of slides left to go sets the upper limit
    for the threshold. The slower the movement, the lower the
    threshold.
    Several conclusions:
    This probably isn't a situation in which the first click is
    ignored. Instead the first click reduces the threshold's value to
    the lower limit. The second click would then typically occur after
    3 additional seconds, particularly if the user is surprised that
    the first click didn't work and pauses slightly. A very fast
    additional click on the Continue button is ignored as well.
    Long quizzes will cause more complaints about the issue
    because of what you experienced. It typically takes longer to
    answer the quiz than review it.
    Perhaps there's a workaround that would alert the user that
    the Continue button is ready for clicking. I'm thinking that since
    the text caption fade-in coincides with being ready to continue, an
    image or the like might do the trick. Any suggestions out there?
    Humm, a better alternative might be to show some images of
    snacks on the results slide background. Through suggestive selling,
    the user realizes it's time for a break and clicks Continue after
    returning with that cuppa joe. And the sound you hear? It's the
    Captivate developers giggling if they read my conclusions. Too bad
    they're mum, since some real info might make it easier to make
    Captivate behave. Ah well.
    Phil

  • Can I delete Quiz Results slide in CP7?

    Hi
    I am using CP 7.0.1.237. I have read that this cannot be done in CP6.
    Is there a way to delete the Quiz Results slide in CP7 atleast? I know I can hide it. But I prefer deleting.
    Sreekanth

    No, it will always be hidden, unless you delete all the question slides, that is the only situation in which you can delete the score slide. Why bother about that? If you publish, hidden slides are not included in the published version.

  • Continue button on Quiz Results Slide not working Captivate 7

    I have the Quiz Settings set to Continue when the user passes the quiz. However, when the user clicks the Continue button on the Quiz Results Slide, nothing happens. I want the user to be able to continue to the next (and final!) slide in the project. The timing for the Quiz Results slide is set to be active for 7 seconds. Umm, suggestions for a fix? Thanks. This problem has been driving me nuts since I'm so close to finishing!

    I changed the timing on the results slide back down to being active for 1.5 seconds so that's what will show up in the screen shot below. I also included a screen shot for the Pass/Fail settings. Thanks.

  • CP5: Scoring and Quiz Result Slides for Selected Questions

    Hello World,
    I am trying to create a course that has several "knowledge checks" that don't need to be scored or tracked, and then a 10 question quiz at the end that needs to be scored and tracked.
    Does anyone know of a way to separate those two elements so that the Quiz Results slide does not include any of my "knowledge check" data and just gives the user details of the 10 question quiz? I would also like to use the progress bar, but only for the final 10 questions.
    Alternatively, if the quiz result screen separated out the results of the knowledge checks from the quiz, that would work as well.
    Thanks,
    Graham

    Hello,
    If you use the Question slides that come with Captivate, all the slides will be added to the total score because you can only have one Quiz in a CP-file.
    Some ideas: you could set the score of the first (not te be tracked) slides to 0, or if possible change the questions from scored to survey (will not be scored).
    If by Progress you mean the indication 'Question X of Y', there you will need to make your own counters, with user variables and advanced actions. If you want to have total control of your question slides you could create the first bunch of questions yourself and only use the default Question slides for the real last Quiz. Just published a blog post today with some links to articles about customizing Quizzes. Feel free to check it:
    Customize your Quiz using advanced actions
    Lilybiri

  • Custom success and failure messages on quiz results slide

    I'm trying to create a custom success and failure message on the quiz results slide, using certain colours in the text caption to reflect our company's brand. So I've added an advanced action on entering the slide so that if the quiz percentage is 80% or more, the success message shows, and the failure message hides. It seems that this should work, but for some reason, only the failure message displays, regardless of whether I fail or pass. Has anyone else tried this with any success?
    Thanks for your help!

    I've changed the retake and continue buttons to image buttons, then added my custom success and failure captions which I've named 'fail_f' and 'pass_f':
    And here is my advanced action on entering the quiz results slide:
    The hide-button, is a white rectangle that I added so that I could place it over the retake button if they passed the quiz successfully. 

  • Continue button on Quiz Result slide not working

    Hi,
    I really hope there's something easy I'm missing here. I've
    created a quiz with 25 questions. I don't have it reporting to an
    LMS, but I do have a quiz results slide. If the student gets a
    passing grade, I've set the Continue button to go to the next slide
    (where they get a congrats message and can print a certificate).
    I'm publishing it as an SWF file. When I take the quiz and pass it,
    the Continue button doesn't work. The way it is now, students are
    stuck at the end of the quiz. Any ideas?

    Hi J
    Sorry that didn't seem to work for you. Hopefully someone
    else will see it and maybe chime in with a suggestion.
    Until that happens, you (as well as anyone else seeing this
    behavior) should report it to Adobe as a bug.
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • Is there a way to change the formulas for the fields of the Quiz Results slide?

    I see the placeholders for the fields on the Quiz Results Slide (Number of Questions = {total-questions}).  Is there a way to view and change those calculations?

    You can select which variables appear on the Quiz Results slide, but you cannot really change the calculations used by Captivate under the hood.
    Depending on what you're trying to achieve, you might be able to insert your own captions reading off the same variables and use Advanced Actions and Expressions to cook up different results.  But it depends very much on what you want to do and whether or not the variables are exposed, and whether or not the limited Expressions available will allow the math.

  • It will not let me edit the quiz result slides length.

    I need to edit the length of time that the quiz results page is on the screen. It will not let me edit it. Also the continue button does not work.

    The Quiz Results slide will always pause and there's no way to prevent that.  Look at its timeline and you can see a faint vertical line that indicates the pause point.  You can use your mouse to move this sideways and delay the pause untill objects enter the timeline.  But the rest of the slide beyond that pause point will only play once you click the Continue button.  If you have set a very long duration for the Quiz Results slide, then once you click Continue, what you see as the Continue button not working could just be the timeline continuing to play until it reaches the end of the slide.  Watch the scrub bar on the playback bar to see if it's moving.
    Once the slide is paused the user has to click one of the buttons on that slide to move elsewhere.  If your Continue button is not working, the usual reason is that you have the Quiz > Settings > Required option set to something that will prevent the learner from moving beyond the Quiz Results slide until they fulfil some kind of requirement (e.g. answer all questions or pass the quiz).  So check that setting.

  • Dynamit Quiz Results Slide Messages

    I have a quiz that gives two attempts to pass.  At runtime execution, if you fail the first attempt, the results page says "Failed, click retake".  If the user fails the retake it says "You failed the retake, close window.".  If the user closes the SCO and re-opens it, bookmarking kicks in and they're brought immediately to the Quiz Results page, BUT.......my dynamic text box messages are all garbled (they all appear at the same time).
    Since re-launching the SCO makes the SCO player think it's "attempt 1" all over again, what kind of conditional messages / variables can I use to essentially hide the original dynamic messages, but display a third message basically saying "Here are your results, you have no further attempts allowed" ?

    Figured it out myself.  If you relaunch the SCO and bookmarking is involved for failures, you're executing Quiz Attempt = 0.  Based on that, I can make my third dynamic statement!

  • Continue button on Quiz Results slide not working...

    Hi there,
    Having some significant difficulties in Captivate 3 recently
    - but this one appears to be a deal breaker...
    The continue button which appears at the bottom of the quiz
    results page doesn't work - as in, it doesn't do a thing even
    though in preferences I've set pass/fail preference for it to jump
    to different slides depending on success or failure. I have tried,
    literally, everything I can think of but it refuses to work.
    Anyone got any suggestions? I would be over the moon if I
    could get this working.
    Thanks in advance.
    J

    Hi J
    Sorry that didn't seem to work for you. Hopefully someone
    else will see it and maybe chime in with a suggestion.
    Until that happens, you (as well as anyone else seeing this
    behavior) should report it to Adobe as a bug.
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • How do I stop background audio clips from playing while browsing sites?

    Firefox is my default browser. I use Google chrome and Internet explorer sessions for background monitoring news site sessions at the same time. I have no problem with the other two browsers. While surfing with Firefox I get unwanted background audio clips that start and run by themselves. I cannot stop them. They run and then stop by their self. They are some sort of adware and I cannot find the source to remove them. I also get video clips sometimes that I can stop that run around the outside of the active window I am viewing. These is very annoying. I have uninstalled Firefox and reinstalled it but the problem does not go away. I antivirus software, registry change protection software, and registry cleaning software. The problem is with the default browser.
    How can I locate and remove the plugin, addin or service that starts this annoying activity. I have no special unwanted toolbars installed. There is nothing in the installed programs list in the control that shouldn't be there.

    I had a similar problem to this. EVERYTIME i started firefox, it would play an audio clip from a flash game i played a while ago, it would last 5 minutes before finishing. i tried the starting in safe mode, but that didn't work for me, so after that i then tried RESETTING firefox, and that has worked for me.
    On another side of startup problems, firefox would also open up a new tab on startup, usually 22find.com or do-search.com. i know these are caused by a virus and have since deleted it, but it had changed a preference file in firefox causing it to continue to open on startup.
    Having since done the firefox reset, i haven't had either of these problems AT ALL! would recommend this as a possible fix for you friend before trying any lengthy troubleshooting process or downloading any extra anti-virus removal software.
    here's the like to showing you how to reset firefox: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • How to send quiz results to a web page?

    Okay, this should have taken 2 minutes, not 2 hours. Very frustrating. Here is the situation:
    * Downloaded Captivate 5 Trial Version
    * Created based quiz (which took forever to figure out how to set the correct answers -- HORRIBLE user interface for setup, but that is another issue)
    * I want the results sent to a web page. I will code the web page & database calls, etc. to handle the information (I am a web developer). Just need the information sent somewhere!
    Several big issues here:
    1. When setting up a URL for the "Pass or Fail", nothing happens. User not taken anywhere. No "Post Results" button shown. The Captivate file just ends and that's it. ??
    2. Finally figured out that I needed the "Internal Server" option chosen to have a Post Results button shown. Okay.
    So when I click Post Results (after answering the 5 questions correctly), I am shown a login box. Why? What is this for? This is not needed. I am going to an INTERNAL SERVER. It is none of Adobe's business what this person's name/email is. What gives? Okay... anyways, I enter my own Adobe login information. It then says "Connecting..." then I get a Status Message that says "Unknown Error". Keep in mind this will be used by a general audience, of which approximately 99.9% will not have an Adobe ID, nor should they need one.
    How I can easily have the Captivate file redirect the user to pages like this: Confirm.aspx?pass=yes or Confirm.aspx?pass=no.
    I don't need anything fancy. But I do need something that works. This is terribly frustrating and I'm about to say it just doesn't work. Please tell me I am wrong.
    Thank for your time and for reading this.
    -Randy

    The Quiz Results slide's Continue button actions are set under Quiz Preferences > Pass or Fail > If Passing Grade etc. By default, the Continue button is set to just continue on to the next slide after the Quiz Results.
    After the user clicks the Continue button on the Quiz Results slide any Pass/Fail actions you've set up there will be evaluated and executed.
    So if the user achieved a passing score, and you set up an action such as Go to URL in Current Window for that case, then the user should find themselves redirected to that URL.  If there was a different action for Failure, and the user failed, then that should happen.  But either of these will only happen after the Continue button is clicked.
    I tested this by setting www.google.com as the go to URL and it worked.  To see if the URL is the issue, try using another URL that you know everyone can get to.  If that works, try to find out why the URL you want to use is not working.  If no URL works, something else is interfering with the action.

  • How do i prevent a slide that is after the quiz results page from showing?

    HI guys, I am trying to achieve the following in Captivate 6:
    1) Users answer questions. They have 2 attempts to pass with 70% or above.
    2) At the quiz results page, if the score is less than 70%, users get a button to retake the quiz. After the second attempt, If the percent is 70% or above, they can click a button to view a certificate or click a button to see a transcript. If the percent is less than 70%, they click a button to get a transcript but NOT a certificate.
    How can i accomplish this since i cannot add buttons to the quiz results page.

    Thanks for the feedback.
    I am trying to implement a simple hide/show routine and it does not work. This is what I want.
    I have two buttons (one to save a certifcate and one to save a course transcript).  I want to display those on the quiz results screen. The user has two chances to make a 70% or more on the quiz.
    If the user obtains less than 70% score on the first try, on the quiz results slide I want to hide the button to save the certificate but keep the one for the transcript. If the user passes with 70 or more, then both icons remain on screen.
    IF the user obtains less than 70% after the second try, the quiz results should only show the transcript button. If they pass with 70% or more, then both icons remain on screen.
    I tried advance interactions to hide or show the icons in the "on slide enter" on the quiz results screen but that did not work.
    This is an example of what i tried. if cpQuizInfoQuizPassPercent is less than 70% hide btncert. I also tried hiding the button and then assigning actions to show the button on passing the 70% but that did not work either.
    Suggestions?

  • How to remove continue button from slide "Quiz Result"?

    After clicking on the button gets the first slide. I want to remove the button. Help. I am a newbie. The settings are not found. Thank you

    It's standards Captivate functionality that you cannot add Interactive Objects such as click boxes or buttons to the Quiz or Quiz Results slides.
    If you're having  issues with the Continue button NOT working on the Quiz Results slides, check your Quiz Settings as shown in my earlier post on this thread.  It may be that you have the settings that make it mandatory for the user to pass the quiz before they'll be allowed to continue.
    Check also in Quiz Settings in case the default Action for Pass or Failure is set to Continue.  It might be set to No Action or something else that the Continue button cannot do for some reason.
    If none of the above seems to be the case, remove the Quiz Results slide (by turning off Show Results in Quiz Settings) and then turn it on again the same way.  If your project was upgraded from an earlier version of Captivate 3 or 4 it may be that the Quiz Results slide is currently defective.  It's happened to me when upgrading older projects to Cp5 format.  So re-generate the Quiz Results slide again and see if the Continue button now works better.
    By the way, there's a button widget that ships with Captivate 5 which, because it's only a Static Widget and not an Interactive Widget, you CAN add it to the Quiz Results slide.

Maybe you are looking for