How do I stop " disk was not ejected properly" message from showing

My phone's jack isn't that great, and always seems to unplug and plug itself back in causing the " disk was not ejected properly" message to constantly show up. During movies this can become quite annoying, making it exit full screen mode.
Is there any way to prevent this message from coming up so that I do not have to constantly deal with it?
Thanks guys!

I got a new iMac in January 2011. I properly ejected my external hard drive and got the same message. I plugged it back in and ejected it again. Nothing works. I keep getting the same error message every few minutes and it's driving me nuts. I have no loose connections. Everything else works. Does anyone have a solution for getting this to stop?

Similar Messages

  • Since installing OS 10.8 keep getting "This disk was not ejected properly" messages. Why?

    Since I installed Mountain Lion (OS 10.8) on my Mac Book Pro (early 2011), I keep getting "This disk was not ejected properly" messages. No yet sure what I do preceeding this occurence. Anyone else have this problem?

    I am one of those who had experienced this kind of problem.  My former Time Machine disk used to automatically eject itself when my iMac sleeps, hence upon waking up my iMac. i always get the error message that the disk was not properly ejected.
    From what I was able to gather from my experience, until the time that I found a workable solution, I think I can say that the problem is most probably caused by the incompatibility of certain external drives with how the iMac operates when on sleep and upon waking up.  Some external drives are just not able to cope with how the iMac tries to remount a connected disk after it wakes up from sleep.  There are just some external drives that cannot continue to be mounted after the iMac wakes from sleep.  There are just some external drives that are not responsive enough. In other words, the existence of the problem lies with the type of external drive you are using.
    My former Time Machine disk, the problematic one, was an Imation M300 Apollo 1 TB external disk.  It unmounts everytime my iMac went to sleep, but does not remount after waking up the iMac.  The disk will continue to be unmounted until I physically remove its USB connector and replug it in the iMac.
    I replaced my former Time Machine disk with my current one, a Transcend Storejet 1 TB.  And the problem went away.  The Transcend disk continue to be mounted after the iMac is woken up even from the longest of sleep.  I have even the energy saving option "put the hard disk to sleep..." checked.  The Transcend disk comes with a Y cable, i.e. it has two USB connectors, but I only connect the one for both data and power--and it still remains mounted even after waking the iMac from sleep.
    The sad realization, however, is that since there are only some external drives that are not able to work with the iMac, no matter how many those some may seem to be, it will be highly unlikely for Apple to itself fix this kind of a problem.
    I, therefore, make the following recommendations:
    1.  Check first if your problematic disk has a firmware upgrade available.  In some cases, the firmware upgrade may be enough to make the disk more responsive to the iMac waking up.
    2.  If there is no firmware upgrade available, check if your power/data USB cable is properly working.
    3.  If your power/data USB cable is in order, and the problem still persists, I think it is inevitable that you have to replace the problematic disk with a newer one that could respond well with the iMac's wake/sleep operation.  With what disk will you replace your problematic one?  I can only recommend from my personal experience the Transcend disk I mentioned earlier.  You may also search this forum on other brands of disks that may also work.
    Regards.

  • The disk was not ejected properly message

    Ever since I started using Mountain Lion, I have been getting a pop-up message "The disk was not ejected properly".  I get this frequently, click the OK button on and continue.  I do not know what disk it is referring to (I have several USB-connected storage devices) and all seem to be working and accessible.  This occurs randomly while I am using the computer and I have not hit any "eject" button or touched any part of my iMac other than the keyboard and touchpad.
    This is annoying and I do not know which disk it is referring to, nor how to correct the problem.

    I'm having the same issue described here. I'm using a MacBook Air (11-inch, Mid 2011 edition) with a Western Digital My Passport 1 TB drive. I first experienced it with a USB3 capable model. After seeing this error occur, I was able to get the drive replaced by Western Digital, thinking it was a fault with the drive. Well, the replacement arrived today and I plugged it in and started a new Time Capsule backup to it and within a few minutes got the same message.
    So I'm starting to think this is an OS issue.
    The first seemingly relevant records from the Console start with:
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: device/channel is not attached.
    10/18/12 7:51:40.000 PM kernel[0]: [0xffffff800fd88a00](1)/(5) Device not responding
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: jnl: disk2s10: do_jnl_io: strategy err 0x6
    10/18/12 7:51:40.000 PM kernel[0]: jnl: disk2s10: write_journal_header: error writing the journal header!
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.000 PM kernel[0]: disk2s10: media is not present.
    10/18/12 7:51:40.674 PM com.apple.backupd[8211]: Backup failed because the destination disk was ejected or disconnected unexpectedly!
    10/18/12 7:51:40.674 PM com.apple.backupd[8211]: Stopping backup.

  • Can the "The disk was not ejected properly" Message Be Disabled?

    Such as when a USB stick is removed with out being "ejected".

    When any device/volume is disconnected/removed from the system physically before being unmounted, that warning will be triggered. There are other circumstances that can trigger that alert as well.
    In routine use, following the proper sequence is the user's job and starts by either using the Finder, Disk Utility or the command line/terminal to get the job done.
    As pointed out, the typical process is to select the device, then bring up the menu to 'eject'. If there is an application or service that has open files related to the device, you will then see a message with that information.
    Forcing a dismount/eject will risk file structure damage and that process isn't encouraged. Disabling the warning isn't simple, if doable at all, sorry.

  • Waking iMac has The disk was not ejected properly. I have OS 10.8.5 using My Book Thunderbolt Duo external HD.

    Waking iMac, since last OS10.8.5 update, gives "The disk was not ejected properly" message.  Western Digital sent a replacement drive to find out the problem doesn't go away. I have tried Option, Command, R and P at start up. This doesn't help. Anything else I might try to rectify the situation?

    The drive is malfunctioning.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    If the drive doesn't work under any of the above conditions, it has to be replaced. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • A warning keeps appearing every 10 minutes indicating the disk was not ejected properly.  How do I stop this warning?

    The disk was not ejected properly.  If possible, always eject a disk before unplugging it or turning it off.
    To eject a disk, select it in the Finder and choose File Eject.  The next time you connect the disk, Mac OS X will attempt to repair any damage to the information on the disk. 

    Try mounting a disk, then ejecting it properly, see if that helps.  Please post back with results.

  • Why doesn't the mac tell me which disk was not ejected properly? How can I find out which one it is referring to?

    If the mac knows that a disk was not ejected properly why doesn't it tell me which one? Would that be making life too easy for non computer nerds????

    Hello Rails50
    All External Hard Drives, Flash Drives, Camera Cards, iPods, iPads etc. need to be ejected before you disconnect them. Likewise you may also get that message from any of the above mentioned devices if it is going bad, has a bad cord or a flaky connection.
    To check your Console Log Messages, go to: Applications > Utilities > Console and select All Messages.
    On that note, it would also help greatly if we knew what external device(s) you are using with your iMac?
    Dennis

  • "Disk was not ejected properly" error message consistently

    I have had my new Mac Mini for about three weeks.  I keep getting an error message that the disk was not ejected properly. It pops up consistently about every 15 minutes or so while I am working. I am not ejecting any disks when it pops up. It will not stop and it is very annoying when it interferes with anything I am doing.  I have to hit 'OK' every single time in order to get rid of it. Can anyone help me figure out how to get rid of this?  I have read of a few other people with the same issue but no one seems to be able to offer any suggestions. 
    Thanks 

    Your warranty includes 90 days of phone support. Call AppleCare and let them figure it out.

  • Message "The disk was not ejected properly..." keeps reappearing

    Problem: I ejected an external HD (by control-mouse click), turned it off, and disconnected it from the firewire cable. Some minutes later, I got the dialogue box: "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off." I clicked OK, continued to work and, a few minutes later, I got the dialogue back again. This continued to happen several times, so I did a restart and the same warning reappeared at various intervals. I did another restart and have had the same warning appear several times.
    Questions: How do I make the warning stop and, more importantly, what is wrong that makes this happen?
    I have googled the dialogue and only seen discussions about time machine.
    TIA

    +but I'm still concerned about the iMac and why it is repeating the warning.+
    I understand that and we need to do some troubleshooting to see if it will take care of things. Obviously, something got corrupted. Instead of running repair permissions from within DU, you could also run a utility such as Onyx (which includes that) available here:
    http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
    Another suggestion is to start up from your install disk and run the "repair disk" from Disk Utility on that install disk.
    If you want to check if the external is being recognized and still had the data on it, go ahead, but eject and unplug it before doing any of the above.
    Hopefully either or both suggestions will help.

  • Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

    Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly."  I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues.  I use this disk for my Time Machine backups.  This always seems to happen when the computer wakes from sleep, but not consistently.  The computer was asleep overnight and backed up as soon as it awakend this morning.  Two hours later I get the improper ejection message.  I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem.  This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

    I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
    http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
    I document how I discovered this in my blog post:
    http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

  • The disk was not ejected properly

    I have 3 Seagate 1.5TB external USB drives. Two of which I am using with a MacbookPro 17" first gen. Latest snow leopard. The third one I am tethering to a Dell XPS server. The one attached to the Dell works fine.
    On the MBP17 Every now and again (randomly) the disk disappears from finder and I get this dialog:
    |
    | The disk was not ejected properly. If
    | possible, always eject a disk before
    | unplugging it or turning it off.
    |
    | To eject a disk, select it in the finder and choose File
    | > Eject. The next time you connect the disk, Mac OS
    | X will attempt to repair any damage to the
    | information on the disk.
    |
    | ( OK )
    I've replaced one of the drives through Seagate RMA and the same thing happens with the returned/refurbished drive. So, I really don't think there's anything wrong with the drives.
    I've tried at least 3 different USB cables of different lengths from different vendors. One is only 1.5feet & gold plated. Still, random ejects. Using the disk attached to an old dual G5 I have... I don't have this problem.
    Anyway, I am thus quite leery of using it for anything other than backups. I've never had the problem while actually copying files, only when I'm doing something else (like typing an email, or browsing the net).
    I recall having read some older Macbook Pro 17" owners having similar issues with >= 1TB drives on these forums [http://discussions.apple.com/thread.jspa?threadID=2151621&start=120&tstart=0] but no solutions.
    If someone can point me to a solution I would be very grateful.
    Message was edited by: phpguru

    @Gizmolab - Thanks for that reply. It seems like a decent theory. I found Seagate Diagnostics for Mac. It says it's only for drives that have a FireWire800 port. The ones I am using have USB only. I installed it anyway. When I run diagnostics it says no drives found so I cannot diagnose them. I'll see how it goes though, maybe it updated the driver.
    To add some more info to this thread... I figured I'd try Disk Utility to manage the drives manually. I've tried dismounting them and also just dragging the volumes to the trash when they are not in use, and using Disk Utility to mount them again when they are needed.
    What I've found is that in addition to the drives automagically ejecting themselves (and remounting again automatically about 20 to 30 seconds later)... is that a dismounted drive will automagically mount, too. Okay fine, I'll dismount them and unplug the USB cables, and reattach them when I need them.
    Disk Utility reports that there appears to be no problems with the disk... thankfully. While typing this reply, I heard the disk go to sleep and about 3 minutes later it just ejected itself dang it. So Seagate Diagnostics appears to be only for Firewire800 drives.

  • Has any one come up with a solution to the "the disk was not ejected properly" when using time machine with an iMac and seagate back up drive?

    I recently bought an iMac and love it.
    Only proplem I have is I keep getting an error message "the disk was not ejected properly"
    Everything is backing up fine on my Seagate 2TB external USB drive.
    Each time there is access on the seagate and it stops in between needing to back up again I get this message.
    Can anyone help?

    The drive is malfunctioning.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    If the drive doesn't work under any of the above conditions, it has to be replaced. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • Disk was not ejected properly comes up when I start my computer. I'm running 10.7.5 and have not ejected any disks or had problems in the past ejecting.

    I can't figure out what disk was not ejected properly. All I have connected is an external HD. How can I find the disk that needs to be ejected?

    If your profile is correct and you are still on Tiger (10.4.x) then insert the Tiger Install disc that came with the computer and run Disk Utility and repair Disk Permissions. Also it would be wise to do 2-3 Intel iMac SMC and PRAM resets in a row. They can be a little stubborn so doing several could be what it takes.

  • Error statement - "the disk was not ejected properly."

    Error statement - "the disk was not ejected properly."  I have my back disk pluged into my computer and when goes to sleep at night it gives me this error, how can I fix it.

    I've been following this issue for a long time on one of the other Apple forum discussions. A suggestion was made to install an app called Jettison (by St. Clair Software). Since doing this two days ago, I have not seen the infamous "improper ejection" error message. Jettison seems to  do, automatically without any effort on my part,  exactly what the developer says: "Jettison eliminates the hassle of manually ejecting external drives before you put your MacBook to sleep and remounting them when it wakes."
    By automatically unmounting my two external USB drives when the computer goes to sleep, Jettison is  eliminating the opportunity for Apple's faulty USB power management system to improperly eject my external drives. As soon as my computer wakes up, Jettison quickly remounts the external drives. And, most importantly,  Jettison  has NOT caused any conflict with my Time Machine backups or my SuperDuper clone backups (three of which are scheduled to run automatically at 1:00am every night.
    See: <http://stclairsoft.com/Jettison/index.html>

  • Why do I get the disk was not ejected properly when in sleep mode

    I have time machine on with an external hard drive.  Recently, after the laptop goes in to automatic sleep mode I get this "The disk was not ejected properly."  I did not get that before, what changed and how can I get rid of this annoying pop up?

    That may be attributable to a 'delicate' connection.  Make certain that the USB is well seated.  Try a different USB port.  Try a different cable.  Try a different enclosure.  Last, perhaps the HDD is being uncooperative and should be replaced.
    Ciao.

Maybe you are looking for