How do I stop MobileMe error message without a Preference Panel?

This MacBook running 10.6.8 has no MobileMe preference panel and no "ByHost" folder, so I can't follow the instructions found elsewhere here to stop the error message "You entered an invalid MobileMe member name or password. Verify your MobileMe member name and password in MobileMe System Preferences."
The error message keeps popping up and I can't figure out what program is producing it. I have removed the MobileMe account from iMail. I've checked iCal and Address Book, and they don't have MobileMe syncing turned on.

Removing the MobileMe account from Mail (not iMail) won't remove the account's setting for Outgoing Mail Server (SMTP). Look at the list in your remaining Mail accounts and delete the one for MobileMe. Otherwise, everytime you open Mail, that server connection will attempt to connect.

Similar Messages

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • How do I stop an Error Message that I now get on start up after installing Itunes 10.2.2

    I have now installed Itunes 10.2.2 twice and continue to get the following error message when starting up my laptop.
    AppleSyncNotifier.exe
    CoreFoundation.dll not found.
    How do I get rid of it?

    ... let's have one more go at a repair install, this time of Apple Application Support. (That's where the CoreFoundation.dll program file lives.)
    So pretty much the same as last time, except this time we select Apple Application Support in Add or Remove Programs and then do a repair install of that.
    Any change?
    If not, let's try download the MobileMe Control panel, and then installing that. It's a much smaller download than the iTunes installer. (I fear your internet connection charges might be steep out there in the bush.) Here's a link to the installer:
    MobileMe Control Panel for Windows
    If that installs successfully, does the message go away after the restart? (If so, you can probably uninstall the control panel without the error coming back.)

  • How can I stop syncing error message: "Microsoft Word has encountered a problem and needs to close"

    On my Mac I am endlessly receiving this message: "Microsoft Word has encountered a problem and needs to close" it relates to the sync which between Calendars (iCal and Entourage) .
    The error messages were coming up every 5 SECONDS and were impossible to deal with. They stated there was a 'Blame Module' which wasEntourageCore
      I have been unable to find any idea how to resolve this.
    Please can anyone describe what they have done to sort this?
    I am using MS Office 2008.
    Turning off the sync between the two calendars was not the answer, as the messages continued. So I have temporarily disabled the sync between iCal/Entourage and my iPad.  This has prevented the error message, but obviously means I must enter diary dates manually on iPad which is the whole point of the sync!
      I haven't found a way to sync between iCal and iPad - this would be a possible work-round. But I'd be so grateful to know how to resolve the sync error.

    On my Mac I am endlessly receiving this message: "Microsoft Word has encountered a problem and needs to close" it relates to the sync which between Calendars (iCal and Entourage) .
    The error messages were coming up every 5 SECONDS and were impossible to deal with. They stated there was a 'Blame Module' which wasEntourageCore
      I have been unable to find any idea how to resolve this.
    Please can anyone describe what they have done to sort this?
    I am using MS Office 2008.
    Turning off the sync between the two calendars was not the answer, as the messages continued. So I have temporarily disabled the sync between iCal/Entourage and my iPad.  This has prevented the error message, but obviously means I must enter diary dates manually on iPad which is the whole point of the sync!
      I haven't found a way to sync between iCal and iPad - this would be a possible work-round. But I'd be so grateful to know how to resolve the sync error.

  • How do I stop getting error messages while creating a NEW iTunes account?

    I'm new to MAC. Have been a PC user for nearly 15 years, so I am learning. Recently tried to login into iTunes. I wanted to start a digital music library as I am YEARS behind in that area. However everytime that I try to 'Create a New Account' on iTunes I get the following message:
    Session Timeout. Your session has timed out. Please try this operation from the beginning.
    I have repeatedly quit iTunes and tried to create a new account. I have downloaded the newest version of iTunes. Re-started my computer. It does not seem to matter what I do, I cannot create an account for myself and I always get the same error message. What should I do to resolve this?
    Thank you,
    sun_teacher

    See the thread here:
    http://discussions.apple.com/thread.jspa?messageID=8622337&tstart=0
    We all had the same problem.

  • When opening firefox, how can I stop this error message pops-up: NS_ERROR_XPC_JAVASCRIPT_ERROR_WITH_DETAILS

    This is in the body of the error message.
    '[JavaScript Error: "dir is null" {file: "file:///C:/Users/Peny/AppData/Roaming/Mozilla/Firefox/Profiles/1ga2twaw.default/extensions/%7B0538E3E3-7E9B-4d49-8831-A227C80A7AD3%7D/components/nsForecastfox.js" line: 323}]' when calling method: [ffIDiskService::get]

    FYI: The "nsExtensionManager.js:623" issue is caused by an incompatibility of Personas Plus 1.6 with the Google Toolbar.
    See [https://bugzilla.mozilla.org/show_bug.cgi?id=590608 Bug 590608] - Personas Plus 1.6 incompatibility with Google Toolbar
    Your user agent shows that you have the Fast Browser Search toolbar (FBSMTWB) installed.
    Control Panel > Add or Remove Programs. Uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo) (My Tattoons) (mywebtattoo.com)(www.tattoodle.com)
    Files: fast-browser-search.xml, fbstoolbar.jar, fbstoolbar.manifest<br />
    http://www.tattoodle.com/uninstall.aspx<br />
    See these pages and threads about Fast Browser Search (FBSMTWB in the user agent, Help > About).
    *http://www.fastbrowsersearch.com/FBS_Toolbar/Help/helpUninstalling.aspx
    *http://www.pccybertek.com/2009/05/remove-fast-browser-search
    *http://forums.mozillazine.org/viewtopic.php?f=38&t=1430845

  • How do I stop security error messages being displayed?

    Multiple messages are displayed when I'm in hotmail saying "Due to Mozilla's security features a link was blocked" etc. It says there was a security error and gives long references. I have to close these messages down before my page will load properly, otherwise the page width is extended and I have to scroll to see things.

    Hi,
    I have a smiliar problem. And I wish I had an answer to yours! It seems that nobody knows the answer! I want to change the mobile phone number which people see when I send txt messages over skype. It confuses people when they see my Australian number (the one originally registered in skype) when I am overseas, people always think I am in Australia. The problem is I can never seem to remove that number I originally used when I set up skype a few years ago. I have changed every instance in skype (profile page etc) where the number appeared but it still displays when I send messages... Anyone know?? Thanks!

  • How do I stop the error message coming up when I press cancel on file dialog

    I am using the file dialog and if I press cancel an error box pops up with error 43 operation cancelld by user. Can we get rid of this, as it is bloody enoying, any ideas
    cheers

    Contrary to the rest of the nice folk here, I say do NOT turn off automatic error handling!
    You will regret it if a day comes where you forgot to handle an error properly and you have a hard time determining its source.
    If you truly want to ignore the error in this mode, you can wire the error out terminal into anything (even a wall). Once an error out terminal is wired, the error will not pop up automatically. This does not mean you should use this as a standard course of action. You should normally handle your errors properly.
    Try to take over the world!

  • How to stop an error message that pops up every time I open Safari. It reads...Safari 5.1 (v6534.50) has not been tested with the plugin PithHelmet .As a precaution, it has not been loaded. Please contact the plugin developer.

    How do I stop this error message from popping up every time I start up Safari ?
    Error message reads...
    Safari 5.1 (v6534.50) has not been tested with the plugin Pithhelmet 3.0b6 (v 3006)
    As a precaution, it has not been loaded. Please contact the plugin developer.
    I have removed every trace of Pithhelmet, (via spotlight)
    Trashed the preferences for Safari, restarted computer to no avail.
    It just  keeps keepin on.
    Thanks

    In the past I was able to bypass the message by editing the Info.plist file and updating the MaxBundleVersion variable, but not so this time around. As of today the developer seems to indicate there's no immediate fix becuase of how Safari 5.1 handles multiprocess page rendering. Probably best to stay tuned to Mike's website for now.

  • How do i stop the "error 1004 please try again later" on the iphone.?

    How do I stop the error message "error 1004 please try again later" on my iphone4? I have been getting this message for several days now when I try to update my applications. I do not get this message when using the itunes store on the pc.

    Look at:
    http://support.apple.com/kb/TS3221

  • How can I fix an invalid sibling link error message without my original install disk?

    How can I fix an invalid sibling link error message without my original install disk?

    Hi Jeff,
    It's not even likely the Install Disc could fix that, but if you want to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    You must repair the HD, your best bet is likely DiskWarrior.
    BTW, you might enjoy these DiskWarrior review/recommendations...
    http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
    http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
    http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925
    http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
    http://discussions.apple.com/thread.jspa?messageID=12744794&#12744794
    http://discussions.apple.com/thread.jspa?messageID=12912879#12912879
    Finally, you should run DiskWarrior if your Mac explicitly warns you of a problem with your disk in the form of an error message. Most of these errors are reported by the built-in Disk Utility whether your Mac OS X version is 10.3 Panther, 10.4 Tiger, 10.5 Leopard, 10.6 Snow Leopard or 10.7 Lion. Here are some of the most common messages:
    Disk Repair: The disk was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.
    The underlying task reported failure on exit.
    Invalid node structure.
    Keys out of order.
    Invalid key length.
    Invalid directory item count.
    Invalid extent entry.
    Invalid record count.
    Invalid index key.
    Invalid sibling link.
    http://www.alsoft.com/DiskWarrior/details3.html

  • ITunes has stopped working error message on opening iTunes.  How do I get passed this

    Every time I open iTunes I get the error message "iTunes has stopped working" and all I can do is close the program.  I have uninstalled iTunes and re-installed it but I get the same error.  I am working on windows 8.  Can anybody please help me to solve this problem.

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • "Error Message" without interrupting the transaction

    We use a VB application to insert/update records in a Oracle database.
    Any user is allowed to see all fields, but not every user is allowed to update all fields. We check the right to update in a database trigger and raise an error if a user wants to update a field for which he has no rights.
    User X has the right to update field A, but he has not the right to update field B.
    Now we want to change the application
    If X tries to update fields A and B, we want to accept the new value for A, leave B unchanged and inform the user with a message like an error message without interrupting the transaction.
    Has anybody an idea how to implement this?

    In the project it's presented:
    1) how the servlet can send JSON data depending on the request's parameter
    2) how to obtain this data on the client side and show in on the page using jQuery without refreshing the whole site
    What You need to do is just to send the error (as JSON data) insetad of the values that are passed now and display this error on the page.

  • Itunes store won't open.  It tries and then stops. no error messages. I've reinstalled and same thing happens. any ideas?

    itunes store won't open.  It tries and then stops. no error messages. I've reinstalled and same thing happens. any ideas?

    Hi Guys:-
    If this SAME problems is effecting us all then suspect its not IPS problem as we all get problem at 995.6MB.
    I would think that there is some kind of software conflict.  If we all having this problem just think of how many users have the same but are not on this discussion board, bet you its 100s and 100s.
    Not possible for me to visit store now but will monitor your responce's. 
    Good luck guys, lets make um give us a fix:- I will call them tomorrow and see what they say:-  should point support to this Discussion page and they can answer us !
    Cheers and good luck also

  • ITunes has stopped working error message while downloading iOS 5

    I am having issues with iTunes stopping while im in the middle of the new iOS 5 download. It never fails while im just using itunes for anything except downloading the new software. Im not sure how to fix it and im hoping someone else might be able to help me out. This is what my problem report states when i open it up.
    Problem Event Name:    APPCRASH
    Application Name:    iTunes.exe
    Application Version:    10.5.2.11
    Application Timestamp:    4ee0844d
    Fault Module Name:    msvcrt.dll
    Fault Module Version:    7.0.6001.18000
    Fault Module Timestamp:    4791a727
    Exception Code:    c0000005
    Exception Offset:    00009f13
    OS Version:    6.0.6001.2.1.0.768.3
    Locale ID:    1033
    Additional Information 1:    57ac
    Additional Information 2:    97b6ca588eb69f9a752c1d44acafdfa9
    Additional Information 3:    9518
    Additional Information 4:    0f4b683d85bb934e783b2cc9ae8a1ee3

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Maybe you are looking for

  • When-new-record-instance

    Hi All ! I have a form, where in *Trigger:when new form instance* enter_query; *Block level Trigger :when-new-record-instance* :empaply.employeeid:=:global.employeeid; select employee_id,firstname into :empaply.employeeid,:empaply.employeename from p

  • Can't delete bookmark folders

    I have tried repeatedly to delete folders in bookmarks. Last night they disappeared finally but this morning they are back! I have removed the firefox program from computer and then reinstalled but it remembers, I logged out of sync and then removed

  • Calendar year / Month (0CALMONTH) values format differs from Infocube

    I run BEx query which is based on Infocube, the values of 0calmonth displayed as 01/2008 whereas in infocube the values are shown 200801. How to change the 0calmonth format in query result same as Infocube .( ie. 01/2008 into 200801). Note : I need t

  • Link to Adobe Createpdf manual

    I need to know the LINK to where I can download the Adobe Createpdf manual  Please provide

  • Questions about DVD burner

    So I'm shopping for a DVD burner and I see this: "System Requirements Mac 256MB RAM Mac Intel and Power Mac G4 500 Mhz" My computer is 400 Mhz so I can't buy this ? Another burner says: "system requirement: Mac OS 10.3.9 / Linux-based system / Win 20