How do I stop my ipad telling me there's no sim card installed?
Hi,
I have an iPad mini. I don't keep a SIM card in it (although I could, it's not limited to wifi only) and, in fact, I paid extra to buy the ipad without a contract to a network. Since "upgrading" to the latest ios, my ipad tells me there's "no SIM card installed" every few moments. It's happened 5 times so far, typing this and it's making me want to punch my ipad in the face. Is there any way to turn this off?
Thanks.
Yeah, same problem here, same sentiment! it sure feels like harassment. no solution works (even the absurd ones). makes me regret the update :s
Similar Messages
-
How do I stop iPad telling me I have no SIM card installed
I only use wifi, but I'm continually told every few minutes I have no SIM card installed how can I stop this.
Depending on your iPad model, if you have Siri you can tell her to turn Cellular Data off. If you own the iPad 2, then the only way I was able to do it was to get a SIM card (you don't need to activate it) and place it in the Sim slot. Once you do that, you then have access to turn off cellular data through settings.
Settings->Cellular Data - toggle it off.
Hope this helps! -
I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?
ITUNES show keep show there is no sim card installed in the iphone you are attempting to activate.....how?rajafromcalifornia wrote:
how can i get rid of this error There is no sim card installed in the phone u are attempting to activate please disconnect and a sim card in the phone please help me and my iphone cannot go to menu display can u help me please
You cannot active a phone if it does not have a SIM card in it. Period. End of discussion.
If you get this error and it has a SIM card in the phone then either the SIM card is defective or the phone is defective. Get a new SIM card and try again. If the problem occurs with the new SIM card the phone needs to be repaired. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743 -
I upgraded my 3gs to the iOS5 software, but it keeps telling me on my iphone and my itunes that it cannot activate my iphone! Then my iTunes said there is no SIM card installed. HELP! I can't seem to even restore, which is what I was told to do by the Apple Store.
Hi there,
if your phone has ever been replaced by Apple (within or outside of warranty), have Apple check their records to which carrier your iPhone (its IMEI number) is currently locked to.
If it is locked to any other than the carrier you have your SIM-card from, ask the folks at Apple to have your phone's lock adjusted to your carrier. Once that is done, there is a good chance that your phone will work again.
Hope this helps,
Chris -
i am not able to activate my Iphone- I have a SIM card but it keeps telling me there is no SIM card. My phone has been unlocked by Apple but keeps.
i got in Manhattan from AT&T-
This error came after I updated the software since Apple confirmed and I have spoken with them and they confirmed it is officially iunlocked since I have full filled their terms of the agreement.
This phone was working earlier since i had jail broken it.
I have been using it with jail break for about 2 years now -
how to fix my iphone 3gs after ios 6 ?there is no sim card install in the iphone you ar attempting to activate
Hello James,
Thank you for the details of the issue you are experiencing with your iPhone. I recommend following the steps in the article below if you are getting the message "No SIM" when your SIM card is installed:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Original iPad 3G 64GB intermittantly says no sim card installed
My iPad, original 3G 64 GB intermittantly says no sim card installed. There is no pattern as to when this occurs. Retarting the iPad sometimes helps. I have removed the sim card, blown out the sim slot and reintalled the sim card. I have done everything I can think of short of restoring back to factory condition. I have since been lent another iPad (identical to mine) and have installed my original sim card. So far, no issues. This leads me to believe it is an issue with the iPad itself. Can anyone offer any suggestions or help?
Thanks,
Art M.If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 15 minutes or so. -
iPad 2 gives message No Sim Card Installed. Worked fine last week. Haven't installed iOS 5. Any suggestions
i have the same issue! any updates?
i have upgraded to ios5 -
I HAVE AN IPHONE 3GS AND ITS NOT REGISTERING TO ITUNES ITS HAS A SIM CARD ON IT, at&t AND TMOBILE (I TRIED) BUT IT IS SAYING SAME THING THAT "there is no simcard installed on the iphone you are activating" i tried TO PUT at&t AND TMOBILE OR VERIZON STILL DOESNT WORK?PLS. HELP GUY I NEED YOUR PROFESSIONAL OPINION
Take it to an Apple Store and have it checked out. You could have a hardware issue there if the SIM is not being recognized.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I just got a new iphone 4 because my old one did work, when i tried activating the new one it give me problems and wont let me do anything on the phone. When i plug it into itunes i get a message there is no sim card installed in this device. Is there anyway i can restore the phone or anything to get it working?
Then something is wrong with the new iPhone 4. Call AppleCare or make an appointment at an Apple store of there is one nearby.
-
hi sir i have a problem in my iphone
The phone was originally locked to AT&T in the US and was hacked to allow it to be used on another network. Restoring the phone has re-locked it to AT&T.
AT&T does NOT unlock iPhones for any reason. You can't use that phone except on AT&T.
Sorry. It's useless to you. Sell it and purchase one you can use. -
Need help asap
I would try poping the sim card out and then putting it back in. Therer is a small hole in the side just stick a pin in it and pop the try out and slide it back in. If that doesnt work back your device up and then restore it. If that still doesnt work go to your phone comany.
MACOSX24 -
I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
There is a sim card installed...
My carrier (virgin) say that they have unlocked the phone from optus.
How do I fix this?
thanks
AnushkaVirgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
They also said they would unlock my iPhone 4 - which has been done! So there's obviously something wrong with the phone...
Maybe you are looking for
-
Setup airport wrong, now scan doesn't find it. how do I fix?
After excellent Apple help, I setup airport wrong, Now scan doesn't find the wireless router - time machine - at all. I think I may have selected bridge for internet, and now the amber light is on steady and doesn't show up in a scan so I can reset i
-
Overriding doSelect method in EO
I have attempted to override the doSelect method in my EO then create a VO based on that EO and execute queries on the VO. My doSelect does not execute. I've attached my code from EO below... can someone tell me how to get the doSelect method to exec
-
EBS 11.5.10.2 Dev6i upgrade
OS: Linux x86 RH REL4 DB: 10.2.0.4 EBS: 11.5.10.2 Dev6i: Upgrading from Patch 18 to Patch 19 I am following MOS note "Upgrading Developer 6i with Oracle Applications 11i [ID 125767.1]" and trying to figure out the order of the patches. When exactly t
-
How to verify and_or mod pdf settings
I'm having a couple of issues with pdfs. First, our Epson SP7800 proofer is run off a Mac G5 server with Colorburst 6.1.4 RIP software via USB. Colorburst requires High Quality Print, PDF/X=none, and PDF version 1.6. I can verify all but the High Qua
-
Can't create .jar file?
Am trying to create a .jar file, but without any luck? My classpath is set like this: C:\j2sdk1.4.2\bin; And am trying like this: cd C:\Documents and Settings\aslan1\Skrivebord\retroguard-v1.1\retroguard-v1.1\Regnskab1.5.1\ jar cvf Aslan.jar *.class