How do I stop  my mail from send out my e-mails with the mobile me acct instead of my default provider?  I have checked the "use only this server" in my provider account.

How do I stop  my mail from send out my e-mails with the mobile me acct instead of my default provider?  I have checked the "use only this server" in my provider account.

There is no such option/setting on an iPhone to determine this. Whether you can view the attachment has more to do with your connection, WiFi or cellular, and the size of the attachment than anything else. There will be a paperclip indicating the message includes an attachment regardless if downloaded with the message or not. When connected to the cellular network, if an attachment is below a designated size the attachment will be downloaded automatically. If over a certain size, you must select the attached file icon in the body of the message to download the attachment. The size limit varies by carrier/provider.
Tell her you're gonna leave her out of the Will if she doesn't stop .

Similar Messages

  • How do i stop my iphone from sending sms even when the option is switched off

    Hi, i would love it if someone could help me out please, i have a iphone 4 and my friend also has a iphone but who lives in america for the time being, now we have been imessaging eachother but sometimes the imessage turns into a normal message even though my sms is turned off because i dont want it to cost when i send a text, how do i stop my message from sending when it sends as a normal text even though my sms is turned off, please help, thank you

    What troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • How do I stop my computer from sending emails to everyone in my address book

    How do I stop my computer from sending emails to everyone in my address book? This is happening when I am not on my computer.

    I've been using a local isp and have recently gotten my mac email up and running. I think you are correct about the limitation being from the local isp as I was able to right click and send to all 67 via the Bcc. Good info, thanks.
    I promote the use of Bcc any chance I get. Seems so many out there just don't understand the forward/reply issue where names are scanned from nearly infinite lists of forwarded emails.

  • How do I stop sharing mail with other users on my computer

    How do I stop sharing mail with other users on my Macbook pro?

    You may have to set up different user accounts in the computer if you wish to
    continue sharing the computer among other people, and only use the Mail app.
    Otherwise, if you use a webmail such as yahoo, gmail, or other, just use a browser
    and login each time; then there is no saving of your email to the computer as such.
    I've never used an email client software, nor had an ISP based email account. So
    my numerous computers have never downloaded email into software. No loss.
    But the answers do include setting up extra user accounts, not admin level, so the
    other users do not mess with the operating system; a standard account or just a
    guest account to use a browser to access web-based login email accounts, works.
    There are third-party email client for OS X, some are free applications, others are
    part of a larger browser product, such as SeaMonkey, & other Mozilla derivatives.
    They provide an email segment or client aspect; unlike Firefox that's a browser.
    Setup information should be within the Help viewer in the computer itself. Or by a
    simple search online, including the OS X version and any email client software
    your computer may have installed. Some browser software includes email client.
    Also there are several ways to go in this matter. I don't see questions, only answers.
    To learn how the Mail application works, if you want to import everyone's mail, then
    figure how to set up user accounts in the OS X. Or use web-mail & login by browser.
    Hopefully you can find the best solution for the unasked question.
    Good luck & happy computing!

  • How do I stop my iPad from blanking out returning to main screen?

    How do I stop my iPad from going out and retiring to the main screen?

    I just posted this same thing in another thread. Try the first tip and then try the reset. If that doesn't work, then close all apps - the last tip. If none of these work for you, a restore of your device may be in order. Hopefully one of these will work.
    Try downloading another app - any free app will do. That seems to reset something and it may work for you. If not, try all of the steps below.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Close all apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • How can i stop my picture from flipping when I take it on the front camera?

    How can i stop my picture from flipping when I take it on the front camera? Need help as it's frustrating me:(

    Hmm...Double click on the Home button and try to delete the camera app then launch it again that should fix it. You can also turn off your phone and turn it back on again.

  • How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

    How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
    This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
    Customer Service DCC

    I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
    And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
    Fortunately, i finally found what was wrong with my generated PDF.
    In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
    Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
    As suspected i did not follow correctly the specs on xref table
    Now i'll go and figure what i did wrong with the deflate filter
    Thanks for your help.

  • Cannot set Use only this server for iCloud mail

    Each new versions of OS X add more bells and whistles and brings us closer to the fun that made me move away from Windows, 9 years ago!
    So this update appears to have problems saving my setting and mail is really having problems.
    I have 7 accounts and each has thier own SMTP out going mail server which I set in the Edit SMTP Server List.
    For some reason my iCloud account has lost this setting and now when I try to set it Mail tells me it cannot save the setting while the Incomming mail server is empty.
    But iCloud sets it's own incomming server! I cannot change the setting!
    I'm very disapointed with the way the quality of OS X has dropped with each new release. I'll soon be back sitting up all night trying to keep the Mac working just like I did in the bad old days with Windows, only with less money in my pocket!

    Hi there
    If you have more than one Mail account on more then one server, you can select the server from which you want to sent the mail. If you select "Use only this server" you can't select the smtp server on sending. thats all
    regards
    OH

  • How can I stop my battery from running out in my in my iphone 5 with the new i0s7

    how can I stop my battery from running at a super fast rate on my in my iphone 5 with the new i0s7, ever since I upgraded I am needing to charge up at least 3 times a day.

    https://discussions.apple.com/message/23361957#23361957

  • How can I stop my Macbook from going to sleep whilst I load the operating system (10.5) on?

    I'm trying very unsuccessfully to reinstall the system from scratch, so that I have a clean computer. I'm starting with 10.5 and then going to upgrade in increments from that to the last operating system the computer will run, which is 10.6.8.
    Firstly I've wiped the hard disk in Disk Tools and then started it up from the master disk of 10.5, and its telling me it will take 64 hours and some minutes to install, so I can't keep moving the mouse to stop it going to sleep for that long.
    I know it sounds as though something is wrong, but I have run both Disk Tools and Tech Tool Pro through it and both say there's nothing wrong with either the computer or the hard disk, and it was running fine (if slow - but that's its age!) prior to this clean install.
    This computer is the first of the intel Macbooks and is a single core intel processor with 1gb of Ram.
    What I need to do is to stop it going to sleep during the install, as every time it does it just halts the install and over night, for instance, I'm no further forward than I was the night before, even though I left it going all night.
    All I'm trying to do is get it to 10.6.8 so that I can run Bootcamp on it and turn it into a PC to do my accounts (and no, the software we use only runs on PC, but Paralles, VMWare Fusion etc still make it painfully slow to use, and It's bad enough having to do accounts without having to wait for it to do every move...)
    I can't go straight to 10.6 as the only copies we have of this are "drag and drop" upgrades that Apple supplied with 3 of our other Macs. Also the computer won't read dual layer DVDs (too old) so I can't load the full copy we have made of the OS.

    It's simply called Photos and there is no options/setting thing on it. I have windows 8, it's a stand alone photo library viewer.

  • How do I stop Apple Script from leaving a Text.txt file with each image downloaded using Photo Downloader in Adobe Photoshop CS4_Bridge???

    I use Adobe Photoshop CS4_Bridge _Photo Downloader to import images from CF Cards into my 11" Mac Book Air.  I have an issue with the Text files
    that seem to accompany each and every image that I do not need.  How do I stop Apple Script (which I assume is the culprit in this case)  from interferring with this process.

    Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
    If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
    Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
    Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
    Download iWebBackup Here
    You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
    http://iWebFAQ.com

  • How do I stop System Preferences from carrying out an operation?

    I was in the middle of deleting a user, saving the disk image in the Deleted Users folder. I deleted the Deleted Users folder and I tried to stop System Preferences from doing the deletion but I couldn't.
    The reason why I want to stop the procedure is because it was taking too long. Also the disk image seemed to be taking up too much space. I was worried it would fill up my hard drive. And I don't need the disk image anyway.  I just want to delete the user without saving a disk image.
    So I tried to stop the process by doing what I did above. But I am afraid it might have hung up System Preferences as I removed the file that it was saving the disk image to. I emptied the trash and the file is no longer there.
    What should I do?
    When I go to System Preferences, I see this:
    Have I made System Preferences frozen in some sort of perpetual loop that it can't save the disk image to the site where it's supposed to save it to and so it can't stop saving?

    I think I fixed it. I force-quit System Preferences (I force-quit Disk Utility before I tried this because I thought DU was the one making the disk image) and now System Preferences closes. When I opened it to look at the Users the user that I was trying to delete and save a disk image of is still there. I guess that's expected as I didn't finish the deletion process.
    I suppose the next step is to delete that user but choose the third option that comes up, the one that says delete without saving a disk image.

  • How do I prevent tab focus from changing when I scroll tabs with the mouse wheel? [SOLVED]

    Whenever I scroll my tabs with the mouse scroll wheel the tab focus changes from the page I'm currently on to the tab being scrolled to. I usually have a large list of tabs open and I depend on being able to scroll tabs without changing page focus to keep myself organized.
    Also, I'd like to disable tab scroll wrapping; Once I've scrolled my tabs to the end I'd like it to stop scrolling, not wrap around to the start of my tabs.
    Is there a way to disable these features and revert to the tab scrolling behaviour of a previous version of Firefox?

    This is not a standard feature and can be caused by an extension.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • How do i get online support from rogers- doesnt seem to work with the rogers download

    How do I get online support from rogers- the bridge wont download that they expect you to use?

    Contact them. Or have you?

  • How do I stop my iphone from sending my imessages to another iphone on my account?

    When I updated my Iphone 4 to the new iOS 6.1 software I had to do a restore process and everything on my phone got deleted, and when I started texting, I realized that everytime I received an imessage from someone, it was also going to my sisters iphone as well. Because of this she is getting all of my conversations that I am havign with people. And we have the same apple id account. Also, whenever she sends a text to someone that I have previously texted, it says that I actually sent the text instead of her. I was just wondering if anyone knew how to fix it.

    As has been explained countless times already on these forums...your phones are sharing the same AppleIDs.  Craete your own ID and configure your phone to use those services with that ID.  Edit your Messages settings to reflect the correct phone number and ID:  Settings --> Messages --> Send/Receive

Maybe you are looking for

  • Failed to create posting periods in 2007 A

    The systems returns this error while trying to create a new posting period in release 2007 A SP:01 PL07 The error is : SystemMessage       Error          Existen transacciones creadas antes de %s   [Mensaje 636-7] Please, can you help me. Tansks

  • XL Reporter - Module Names

    Hi Everyone, I'm using SAP B1 2007B. When I open XL Reporter for any company, some code numbers are displayed in the place of module names for all modules except financial. For eg this is the menu I see below financial in the tree view: B1_08_42553.

  • OAS 4.0.8.1 Config on Task7 Post- P2G

    Hello, During Post Installation of P2G (Oracle Portal-to-Go Installation Guide,Task 7), I need to configure the 'Web Parameters' with 3 different MIME types, but I am not able to. "Error encountered while executing processor Oracle.OAS.Services.Serve

  • Soapenv:Server.userExceptionjava.lang.NullPointerException

    Hello all, I have installed tomcat 5.0 for Jwsdp and jwsdp-1.6. AXIS package was also installed in tomcat 5.0 directory as instructed as well as the applicable version, J2sdk 1.4.2_08, of Java. I am currently following the Axis Installation Instructi

  • ERROR IN TAIL DELTA

    HI IN THE RSA7 ALL THE DELTA OF THE TAILS HAS RED, AS I CAN PLACE IT IN GREEN. THIS BROUGHT TO ME LIKE ERROR THAT MY LOADS WERE NOT LOADED MIKE