How do I stop my Shuffle from deleting podcast when I plug it in?

When I plug in my shuffle to charge it, it will delete some of my podcast that I haven't listen to yet? Is there a way to have complete control of what podcast are saved and what are deleted?
If you delete a podcast from your computer will it automatically delete it from your shuffle when you plug it in? Is there a way to stop that "auto" function?
Thanks for any help you can give me!!

Either do NOT delete the podcast from your library, OR in the Settings tab,
in the Options section, deselect “Open iTunes when this iPod is connected.”
Click Apply.
NEXT time you connect shuffle it will only charge IF iTunes is not running.

Similar Messages

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing.

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
Any help is much appreciated!
Thank you!

Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.

How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?

How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?
Whenever I try to import photos to iPhoto or even just edit photos on iPhoto, iPhoto quits unexpectedly.
When I import a photo, before it is finished, iPhoto closes, and a message comes that says "iPhoto quit unexpectedly"
What should I do? How can I import my photos now? Please help!

I have found if you iTunes open while importing photos to iPhoto it will quit unexpectedly - try closing iTunes. Also, try selecting and importing 100 or fewer photos per import...seems like it quits more often when trying to transfer large quantities (like over 200 photos).
I wish Apple would update iPhoto with the same auto-sync feature in iTunes so I could sync photo libraries between computers without trying to figure out which ones are new (although as of this posting the other option is purchasing a 3d party photo sync program).

How do I stop the toolbar from dropping down when I load a program?

How do I stop the toolbar from dropping down when I load a program? When I close a program Like world or Warcraft for example the toolbar keeps opening up when the World of Warcraft manager reopens How do I stop this for this and other programs
I use, its really annoying and should be fixed or a setting made to stop it from doing this entirely.
KingOfMyPC58

Hi,
Could you please share a screenshot here with us for better understanding this issue.
Regarding to “other programs”, what are these programs, more detailed information would be very helpful.
Regards,
Yolanda
Yolanda
TechNet Community Support

How do I stop the menu from showing up when I hover to the top of a full screen app?

I am running Parallels in full-screen on Lion and when I move the cursor towards the top of the full screen app the menu pops up. How do I stop the menu from popping up? I keep hitting an icon on the menu bar that pulls it out of full screen mode and it's getting very annoying. Thanks.

Use VMware Fusion? But seriously, Fusion does what you want. It just puts a mini VM control menu at the top when running full screen (and that's configurable, too), so the main menu bar doesn't appear at all. Which means that it's up to Parallels to handle this. Are you running Parallels 7, which is designed for Lion? If you are and Parallels still doesn't offer something similar, you need to contact Parallels.

How do i stop my account from opening programs when i log in

how do i stop my mac from opening my programs (like powerpoint and word) when i log in?

Normally it's caused the "Reopen windows when loggin back in" option at restart. Uncheck it on shutdown/restart.

How do I stop my audio from changing pitch when moving it to another track?

I read up a bit on the "Flex" settings, however, I can't seem to turn it completely off. The flex button is not engaged, however, when I move audio from one track to another, the pitch changes. How do I stop this completely?

You have to disable it on the tracks themselves too. The 'main' flex button only turns on and off Flex view, and not flex itself.
Flex view on, track flexed
Flex view off, track flexed (or not?)
Flex view on, track not flexed

How to to stop iPad mail from deleting email from server?

iPad 64 / Custom mail
When I delete a mail from my iPad inbox, it is also deleted from my server. How do I configure
To stop this?
In other words, I like previewing my incoming email on my iPod, and I want to be able to keep my iPad email in box tidy by deleting from my inbox without deleting from my server?
Thanks for your hep, IM

Michael Morgan1 wrote:
will.egan wrote:
I hate to have to say it, but...
I'm glad you did so that I wouldn't have to ....
Then you are both talking rubbish. IMAP is designed for multiple client access to the same inbox, and requires either POP3 collection, or explicit deletion from the server, to remove an email.
IMAP deletion should NEVER delete from the server, if you choose not to do so. I have a netbook and a desktop PC using the same inbox. The Netbook uses IMAP, the desktop PC uses POP3. I can delete a message from the Netbook, and it leaves the email on the server, for the desktop PC to collect via POP3.
From Wikipedia "E-mail clients using IMAP generally leave messages on the server until the user explicitly deletes them."
The way the iPad is handling it, is wrong... but then again, this is Apple we're talking about. They will no doubt patent this incorrect behaviour, and market it as a "new invention".

How do I stop my iphone from deleting emails from the server and visa versa

I have the iphone 4, recently my phone started sending email info to the server. Meaning it deletes emails from my hotmail account if I delete them off my phone and visa versa. I know there is a setting under advanced setting, I don't have that button. I showed someone in the apple store and she said it was a software issue and to wipe my phone and back it up from my back up, this didn't help anything, neither did re setting the settings. I don't even have the spot in the settings where I can put in the pop3 information. This is a new thing my phone started doing and I don't understand why I don't have the same setting buttons as everyone else. Any advice? The only other thing I can think is wiping my phone and starting over but I don't want to lose the data in my aps
I'm on the newest software version, this started happening just before I did that update.

POP3 settings won't appear if an IMAP service can be found. Basically, you're going to have to set up the account with bogus information so that the phone can't find the server by itself. Then, when it can't, you'll be presented with the advanced settings where you can set it up as POP3 and enter the settings you want to use.
POP3 is considered pretty much obsolete these days. The whole point of IMAP is to allow you replicate the server based mail store completely so that all information is available across all of your devices. If you don't want things crowding your in-box, but don't want to delete it entirely, why not just set up folders and move things where you want them to be once you read them?

How can I stop sound track from being divided when adding clips to other tracks in PrE12?

The situation:
I have a project with several minutes of video clips on the timeline (expert view) in "Video 1/Audio 1." There is also music on the sound track (below the empty "Narration" track).
Any time I make an edit to the Video 1 track, PRE cuts the Sound Track. (Note that this is not the Audio 1 track, it's the sound track which is two tracks away.) If I insert a clip, the Sound Track is cut and left with a gap. Same if I do a FreezeFrame insert. This is bad enough (make ten insertions, have the Sound Track chopped into ten separate pieces), but it gets worse: when I try to slide the Sound Track pieces back together, the Video 1 clips will be moved around.
This appears to be a major bug but I'm hoping there is a simple way to deal with it.
Here's what the Manual (p.71) has to say about it (not much).
"When you insert a clip into the Expert view timeline, adjacent clips on all tracks shift to accommodate the new clip. By shifting all clips together, the audio and video of the existing clips remain in sync."
* The question here is, adjacent to what? The Sound Track is a continuous music clip of many minutes; it is alone on the Track, and there is nothing on the track above it (Narration track). So it's not adjacent to anything, and yet it is being chopped up.
The Manual continues:
"Sometimes, you don’t want all clips to shift with each insertion. For example, when you add background music that superimposes the entire movie, you don’t want clips to shift."
*They got that right, but they don't say anything about how to prevent it.
This next makes no sense at all:
"To shift specific clips togather, press the Alt key as you insert. At a time, you can shift specific clips simultaneously on a maximum of two tracks. These include the track receiving the insertion and the track containing the linked audio or video (if any). The affected tracks shift together, remaining aligned. The clips on other tracks are unaffected."
*There is no mention of how to specify what clips would be shifted, or not.
I'm not dealing with linked clips. And they tell me how to shift clips (sort of) but nothing about how to stop clips from being cut up and shifted. This all makes it very hard to create a coordinated product.
Any suggestions or solutions will be much appreciated.

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

How do I stop iPhoto 11 from making duplicates when importing whole library from an older MAC?

I just bought a Mac Mini, and i tried to import the iphoto library from my PowerMac G5 (iPhoto 6). It duplicates many of the photos so that there more than twice as many photos in the new machine. I was looking at the photos and some of the duplicates are just resized photos. I guess older versions of photos.
Is there a way to just import the latest versions of photos?
Thanks,
Tony

No it's not a good idea.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Don't use copy and paste, try drag and drop.
If that still fails then rebuild the Library to the new location:
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

How do I stop the page from re-directing when I am searching for something? It re-directs to something that has nothing at all to do with what I was searching for

I put something in the search bar such as "making centerpieces for baby shower" or I put it into google. Then a bunch of matches come up, I click on one that looks good, but immediately it goes to "re-direct" and a web site comes up that has nothing at all to do with the search like an auto shop or something.

I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
What happens if you uncheck rulers from top view options ?
Thanks,
Sanjit

How can I stop my iPhone from Losing space when I STREAM iTunes Movies?

I mean, isn't the point of streaming so that I don't have to download the movie? Even if the phone has to download the movie, why isn't there some option to delete the downloaded movie from phone to free up some space!?

Settings > Mail, Contacts, Calendars. Is Time Zone Support on or off?
If you don't want the date and time updated automatically with your iPhone, you can turn this off at Settings > General > Date & Time > Set Automatically > Off.

When restoring a session with many tabs, how do I stop the tabs from reloading even when I am offline?

In version 4, when restoring a previous session with many tabs (about 80) in offline mode with no internet connection, the tabs will realise there is no connection and will not load. In version 5, the tabs will constantly try to reload no matter how long the internet connection is not active and as soon as I connect to the internet, all the tabs try to load and will cause huge RAM usage and I have to shut down the browser. I want version 5 to be like 3 and 4 and not try reload all the tabs once it has detected no connection.

Hello there, lalaysa.
The following Knowledge Base article offers up some great recommendations for unlinking your old phone number from your device:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How do you stop all devices from going off when one is being called?

After most recent update for apple, all my devices are going off at the same time when only one is where the call is gong to. I have 2 iPhones, 3 iPads and an iPad mini and one newer iPod. Is there a way to stop this? It is kind of a pain.

Go to Settings > FaceTime and turn "iPhone Cellular Calls" to off on each device. It is a feature of Continuity: Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

How do I stop my Shuffle from deleting podcast when I plug it in?

Similar Messages

Maybe you are looking for