How do I stop Photoshop CC from glitching?

At first my Photoshop was fine but all of a sudden, every time I create a new blank background it always shows pictures I've used previously.
Someone please help me!!

We'll need some information about your system. Here's a list to consider.
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Similar Messages

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing.

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
Any help is much appreciated!
Thank you!

Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.

How do I stop Photoshop CS4 from creating a new layer each time I use the line tool?

How do I stop Photoshop CS4 from creating a new layer each time I use the line tool?
Each time I use the line tool, a new layer is created. How can I stop this? No settings were changed.
Thanks in advance.

Look at the three options in the top bar.

How do I stop Photoshop CC from exiting immediately after startup?

Photoshop CC from exits immediately after startup. How do I stop this?

Hi Ashutosh,
Thank you for your reply.
I have Photoshop CC installed on my PC and does not require signing in. Do I need to install it on the Cloud?
Regards,
Francis

How can I stop Photoshop CS6 from unwelding imported 3d models?

Hello,
Photoshop has an issue right now in which when I import a 3d object (it doesn't matter which format, I've tried obj and cae) then it will split the object apart into multiple objects along where the borders of the uv map are (aka polyunweld). How do I stop it from doing that?
Here are images demonstrating what I mean exactly.
http://imageshack.us/photo/my-images/809/97993483.png/
http://imageshack.us/photo/my-images/844/85471742.png/
http://imageshack.us/photo/my-images/846/61658057.png/
http://imageshack.us/photo/my-images/694/76040241.png/

Daniel Presedo wrote:
There is no point? Wrong. We Beta test and draw feedback from our customers everyday.
>>There's no point in me detailing my ideas for improvements to the software design when there's not a hope in hell of the ideas ever seeing the light of day<<
The fact that you have no ideas worth sharing does not really surprise me.
You say it's a fact that I have no ideas worth sharing. You are damned cheeky to a customer who helps pay your salary, lad. What's your problem? Embarrassed by your inept "investigation" of a reported problem? Anyway, how on earth would you know anything about my ideas or their worth?
It is not an easy problem to solve for a variety of customers that are your audience.
What? Not easy to solve? Just don't unweld the polygons! Not unwelding is easier than unwelding, surely
Photoshop has a very diverse community, what you think is good is not what a Photographer thinks makes sense.
That sounds ridiculous.
1. You initially insisted that Photoshop doesn't unweld meshes!
2. Then, after I provided further evidence, you said you would fix the problem.
3. Now you seem to be suggesting that the software was programmed to unweld meshes because it's "what a Photographer thinks makes sense".
It's easy to complain about on a forum, and if it is constructive that is fine but you seem to enjoy just complaining or insulting.
I complain about things at times. I'm insulting at times. But it's a fact that I'm helpful and constructive most of the time. Oh so sorry for not being the perfect contributor to this forum.
>> I've been waiting 5 months for one simple bug-fix<< I don't know when this was first reported and it's unfortunate we missed that (oh yeah we are human too) but we do have mechanism's (Bug reports on feedback.photoshop.com) that reach us directly, some of us patrol the forums but we cannot do that full time and ship a product.
You're completely mistaken again.
I wasn't talking about the problem in this thread. (Which you've denied exists, then admitted exists and will be fixed, and then suggested to be a design decision on behalf of photographers.)
I said "one bug" not "this bug".
The bug which still isn't fixed after 5 months, despite being acknowledged by Adobe, is one that was introduced by the OS X version of the 13.0.1 update. It makes the 3D rendering almost useless for OS X users and did not exist when customers paid $300 for the 3D rendering.

How do I stop Photoshop CS6 from asking to save changes to a file when closing the file, after "savi

I save a lot of files to "save for web". After saving PS asks if I want to save changes to the original file. I never want to save the changes to the original. Since the default is to change the file I am afraid I will accidentally OK the change without wanting to. I would like it to stop asking and just not save it. Is there a way?

Stephen Douge wrote:
I never want to mess with originals. I am asking because I want to make sure I stated the question properly in the first place. Thanks.
Then don't work on the original open the file using Photoshop menu file>open once its in Photoshop as a document dupe the document and close the original document. Photoshop will just close the original and not ask it you want to save the original document for no changes were made to it. You could easily record an action to automate this process. The first step in the action would be an inserted menu item menu File>Open. The second step Duplicate Document, third step select previous document the fourth and final step close. The action would look like this recorded Work in the dupe and save it under the name you want to where you want it saved. The First step is an interactive you will be able to open any file Photoshop has support for that you have access to.

How do I stop photoshop (elements3) from opening when I load photos

Hi,
I have photoshop elements 3 and also Camedia which is the software that came with our digital camera. I would prefer photoshop didn't open each time I load photos or when I want to view photos. Is there a way of controlling this?
Regards

Dear Barbara, thank you so much for your help.
Photoshop came with a scanner I purchased and I have never used it, but
would like to learn the basics to enhance my handmade cards that I make. I
was wondering if there was a textbook that you could recommend that doesn't
incorporate a lot of jargon and is straight to the point. The main things I
want to learn about are the basics of opening up ps, importing a card and
working with the layers to fade or change the colour of the background.
Here is my blog http://simplyhavingfunwithstamps5.blogspot.com/
Regards, Ann

How do I stop photoshop from starting when I open a jpeg file?

How do I stop photoshop from starting when I open a jpeg file?

In windows, right click on the file, select the program that you wish to use to open the file, and be sure to check to always open this type of file with the seleted program.

How do I stop Photoshop Elements 12 from adding a caption to my image?

How do I stop Photoshop Elements 12 Editor from adding a caption to my image? It is automatically adding the name of my camera (as a caption) to the file any time I make a change in the Editor. Then I have to manually delete them.

That's not Elements which writes the Camera model in the exif, that's your camera. It's a common complaint with Olympus.
Solution (edited)
Use the 'Find' menu to select the files starting with the offending caption (Olympus, for instance). Highlight all selected files and right click; select the option to add a caption; leave the caption blank and click enter; you'll be prompted if you want to delete the captions : you do.
See also:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Camera_name_appears

How do I stop Photoshop elements 13 from crashing?

I just installed elements 13 and it upgraded my catalog just fine. Once I was in I started tagging pictures and then I paused. It crashed.
Now whenever I pause for about 30 seconds it crashes.
I have looked at many articles and have not found anything that worked. Can someone help me?

To answer your question directly [ How do I stop Photoshop elements 13 from crashing? ] , the only way I can think of is to reset your preferences file. The method in PSE13 must be the same as in 10 and 11 and it is as shown in this thread:
<can't get pse10 to take my styles, have had pse 10 since 2011 bought pse13 and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I have do not appear in the effect section. I have checked BOTh secti>
Read post # 3 and see if it works in PSE13.
Good luck and post back whether or not it worked.

Photoshop: How do I stop the image from flashing black?

How do I stop the image from flashing black when i am working on it

This is a problem with Win8. Update your video card driver from makers site. If that does not help in preferences set GPU to basic.

How do I stop a tool from functioning on my work after I finish using it?

How do I stop a tool from functioning on my work after I finish using it?

Switch to another tool?
I really don't know what you mean by "stop functioning". The Zoom tool will always work when selected.
Is there a specific example you have in mind? Give us the exact version of Photoshop you are using, and the version of Mac OSX or Windows.
A screenshot outlining your problem is best.
Gene

How do you stop iOS 7 from auto enlarging your background picture?

How do you stop iOS 7 from auto enlarging your background picture? And before it's mentioned, no, Turing off Reduce Motion has absolutely NO effect on the auto enlarge feature that apple stupidly thought would be a good idea. The Reduce Motion ONLY stops the background from subtly shifting as you turn or angle the iDevice.

It should be my choice, not apples.
And I agree. But neither of us is a programming engineer at Apple, and so don't get to make those decisions. The user tip I wrote was based on the fact I didn't like it either, and was trying to figure out why it was scaling an image up in the first place, and then how to fix it as best as possible.
Since you've locked your iPad to one orientation, you should be able to copy your custom image off to your Mac (assuming you own one) and use an image editor, such as Photoshop Elements, to add pixel area to the narrow dimension to make it the same number of pixels as the larger dimension. Increase the canvas size so the extra space leaves the original narrower dimension centered, as in this example:
Copy it back to your iPad and select the modified image. Since it's square, it shouldn't scale.

How do I stop the Finder from seeing SMB (Windows) shares on the network?

I have the OPPOSITE problem most people have -- Windows Sharing works TOO WELL.
I've donated a refurbished eMac to the local homeless shelter. I figured I'd made the system secure, and prevented any monkey business. Turns out the windows machines on the network are COMPLETELY insecure (guest access to everything is enabled). The problem is that the Mac is TOO friendly -- it automatically connects to the server as a guest, and happily presents everything to the user.
I've tried a dozen different things (I've removed the 'Shared' section from the sidebar in the Finder windows (Go->Network is still there, Doh.), tried to turn off File Sharing, and even disabled the mount_smbfs command in the /sbin directory with "chmod 0 mount_smbfs".)
I've asked the folks there to call in a PC tech and fix their security problem -- but it's a good question to which I've found no suitable answer... How to I stop the Mac from connecting to SMB Shares on the local network?
Thanks.
-JD.

Same problem, keep getting a pop up with connection failed you do not have permission to access the server. The server is a windows 7 box, Starting happening after an up grade to windows 7. Nowhere can I find how to stop trying to connect. I am sure its at the unix level of samba but what to do is another question

How do you stop 1.4 from importing??

I recently installed LR2.3 on a machine with LR1.4. I thought it would install over but it appears to have installed a completely seperate copy.
The problem: when I put a card in my reader, the Windows dialog box pops up for 'what do you want to do with this?'.
If I select the LR2.3 icon, it pulls up LR1.4 instead!! The icon definitely says 2.3.
How do I stop 1.4 from importing and letting 2.3 do it?
Right now I have to:
Insert card
Wait for 1.4 to come up
shut down 1.4
Bring up 2.3
Import
thoughts?

I haven't had LR 1.4 installed over a year so I don't quite remember how it worked, but if it uses ADPProxy then you might find relief with the steps shown in this post:
http://www.lightroomforums.net/showthread.php?t=2042

How do I stop Photoshop CC from glitching?

Similar Messages

Maybe you are looking for