How do I stop the doo-doo sound while charging?

I set iTunes to NOT sync when I plug the iPhone into the USB port on my PC (Windows XP), and now I can plug the phone it to charge via USB without having iTunes open and try to sync. Very good.
But... While the phone is plugged in and charging, it keeps "waking up" and going alternately to the "charging battery" screen, and the "unlock" screen. Each time it changes screens, it makes the little "alert" sound. This happens just about every minute, but not regularly. Sometimes the computer will think it "found new hardware".
Is there a simple way to stop this?
I assume it is coming from Windows, and not from the iPhone. The USB port must be sending some sort of "what the heck are you?" polling signal to the iPhone.
I hope I don't have to shut down "plug 'n' play" entirely.
Thanks,
Peter

if you switch the ringer silence switch this will resolve the issue of the phone chiming when it initiates the charge cycle.
As far as the switching back and forth from charging to not charging, the most likely culprit is a bad usb port.. try plugging in to a different port and see if you get the same result, if you do then try a different cable (regular iPod cables will work) eliminate the small stuff first.
The usb port on the right side of my PBG4 did the same thing to me, iPhone keeps jumping from charging to not charging.. I plugged it into the left side, no more problems..

Similar Messages

  • How Do I stop the phone from locking while the navigation program is running.

    I have a Blackberry 9630 V4.7.1.40. The phone is on an enterprise server network through work. The phone is set to password lock after a couple of min. of non-use. When I have the Sprint Navigation program running, the phone locks after a few min and loses my satellite. I then have to type in a password to unlock it and I then get the signal back.
    I called Sprint and they said to press a button after every couple of min. to keep the phone "active". That sounds a little fishy to me!
    How do I keep the phone from locking while the Nav. Application is running?
    Thank you for your help
    Bill

    brauscher wrote:
    press a button after every couple of min. to keep the phone "active". That sounds a little fishy to me!
    Agreed, that is the simplest thing to do... probably much easier than talking your IT guys into raising your timeout.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • In Address Book how can I stop the cursor from wandering while editing a page?

    At times when I am editing a page in Address Book, the cursor wanders, so the text I am typing shows up in the wrong place. Often it deletes exist text. Why does this happen? How can I prevent it?

    Does this only happen in the Address Book or does it do this all the time and causes only issues in the Address Book?

  • When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

    When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

    In Logic:
    Preferences/Audio Set Recording Delay to 0 <zero>
    This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
    On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number.  It's actually a bug in Logic, as it should always display the waveform.

  • How do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?

    how do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • I get an audio sound when my S5 connects to a wifi source.  How do I stop the sound?

    I get an audio sound when my S5 connects to a wifi source.  How do I stop the sound?

        Let's see if we can get that notification sound off treecastle! Please try going into Settings> Sound> Notifications> select Silent> Apply. This should get rid of that notification.
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • How do I stop the message "user name or password for iCloud is incorrect" from popping up 2 times in a row when i try to get mail from other accounts? thank you in advance

    How do I stop the message "Cannot get mail. The user name or password for iCloud is incorrect" from popping up 2-4 times consecutively every time I choose MAIL on my iPhone 4,  7.1.1  I have to select "OK" 2-4 times each time before I can read other email accounts.  I used to have an "@me.com" account which I think was automatically changed to an "@icloud.com account."  I opened a new iCloud.com account yesterday because I could not figure out how to get in the old ones.  I want to delete the original @me & original iCloud account.  When I try to delete the account, they tell me my DOB is wrong. I just want those pop ups to stop.  Thanks in advance for your help.

    Hi Suzanne,
    It sounds like you’re running into a password issue with an older Apple ID that’s setup on your iPhone, which is preventing you from removing an iCloud account from your device. Take a look at the article linked below, it outlines all of the possible ways to change an Apple ID password.
    If you forgot your Apple ID password - Apple Support
    After you enter your Apple ID, there are three ways you can change your password:
    Answer your security questions. Use these steps if you know the answers to your security questions.
    Use email authentication. We'll send you an email that you can use to change your password.
    Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
    So long,
    -Jason

  • Please, please how do I stop the email ding on ipad air IOS7?

    Please, please how do I stop the ding (not change) on email messages on iPad air IOS7

    Assuming you mean the audible alert: Settings app > Notification Center > [account] > Alert sound [set to None]

  • When I navigate to a new page, an additonal page (with a notice that Firefox is blocking access to the page) pops up. How can I stop the page from poping up?

    How do I stop the pop up screens from popping up? I just want the screen I ask for to open

    What is the wording of the message? Could you post a screen shot showing what it looks like? This article has tips on how to do that: [[How do I create a screenshot of my problem?]]
    Also, does the add-on TopArcadeHits sound familiar? You might want to try disabling it here:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    Then restart Firefox (usually there is a handy link for this after disabling).

  • How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

    How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

    Hi AppleLove78,
    I'm sorry to hear you are having issues with your new iPhone 6. If you continue to have audio or call quality issues, you may find the information and troubleshooting steps outlined in the following article helpful:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    Regards,
    - Brenden

  • When i update my Mac, I get an Installation alert that in order to continue installation, please close the following application: iTunes. how do I stop the installation and close iTunes?

    When I update my Mac, I get an Installation alert that in order to continue installation, i need to close iTunes.  How do I stop the installation and how do I close iTunes?

    That sounds like the latest  iTunes Version 11.1.5 update.
    To continue the installation you must first Quit iTunes.
    To Quit iTunes, use
    or

  • How do I stop the Adobe Product Improvement Program prompt?

    How do I stop the Adobe Product Improvement Program prompt from coming up every time I open Photoshop CS5 on my Mac, even after I have responded that I do not want to participate?  This is becoming very annoying and I have looked on line for a method to turn this off without luck.
    Thanks,
    Alan

    It only asks once.
    So it sounds like your preferences might not be getting saved for some reason (usually a permissions problem on your system)..

  • How do I stop the verbal announcements?

    How do I stop the nano from verbally stating  the current artist and song and the whole play list while I am listening to a song from a play list?
    (It also reduces the sound level while it does this.)

    If you have a 6G Nano see here: iPod nano (6th generation): How to use VoiceOver
    B-rock

  • How can I stop the install process?

    How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.

    Hello Serau1s,
    It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
    If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How can I stop the sharing on the iPhones that are in the same account because its sharing every thing even text messages

    How can I stop the sharing on the iPhones that are on my account because its sharing everything even text messages and its driving everybody crazy

    An icloud account is designed to be used by one user to keep his/her devices in sync. 
    If you have muitiple family members or friends using the same account as yours, then have them get their own Apple IDs and icloud accounts.
    If you mean you want to stop the sharing between all your devices, then on any one device, go to Settings>icloud and turn off the services you don't want that device to share/sync.  Or turn off icloud altogether if that's what you want.

Maybe you are looking for