How do I stop the "install Flash..." pop-up? It is annoying!

I use Windows 7 and Firefox 23, and both a updated often. I uninstalled ALL Adobe products to get rid of their spying tools - long-tern cookies that could not be blocked. Shortly after I used Adobe's tools to eliminate local storage, I would go back and find that local storage availability was maxed out. That was not good.
Now I get many VERY annoying reminders to install flash. How do I turn that reminder off, permanently?

hello thospend, please try this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''plugins.notifyMissingFlash'''. double-click it and change its value to '''false'''.

Similar Messages

  • How can I stop the install process?

    How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.

    Hello Serau1s,
    It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
    If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How can i stop the i tune pop force quit doesn't work

    hi ,
    please help " how can i stop the i tune pop force quit doesn't work"

    Refunds on downloaded software are virtually nonexistent.
    I have had cases where I purchase software on a physical disk. If I don't like the software I can uninstall it from my computer and sell it legally. Recouping most of my loss.

  • HT4623 iphone 4 I am trying to install iOS6.0.1 the install is stuck in "preparing to update" and will not move forward. How do I stop the install.

    I am trying to install iOS6.0.1 on my iphone4 and it is stuck on "preparing to install" How do I stop the instal?????

    I'm not sure iCloud is the best community to post that question in, to be honest I have the feeling it's likely something best asked from any M$ discussion groups that there might be.

  • How can I stop the software updater pop ups advising me to update to 11.0.03?

    Can anyone help with how to stop the software updater pop ups advising me to update to Reader 11.0.03? My antivirus advises the link in the pop up is unsafe, so I went to the Adobe website to update from Reader 9. The website doesn't offer X1, but did offer X, so I updated to 10.1.7.
    Why is the site not offering a download for X1?
    Even though I have updated to X I am still getting the pop ups for X1. I have attached a screen shot of the pop up - is this legitimate or some kind of scam carrying a virus?
    Thanks.

    There are literally thousands of sites with videos (linked to from yet thousands more) that will prompt you to "upgrade" or update your already updated Flash Player. This is the most common method of delivery for malware like that.
    A friend who runs a PC Repair business told me that if you've updated your Flash Player and you see a warning in a web page that you need to download an update to watch a video, it's an attack site.
    A simple gesture of holding your mouse over the warning or link, will indicate the address it points to. If it DOESN'T say Adobe anywhere in the beginning of the address (download.adobe.com, or adobe.com/downloads), it's a forgery, and you should leave that page immedaitely. If you download and install whatever they link you to, it may play the content you were looking for, but you've just been infected with something that may lay dormant for months and then suddenly take over your whole system.
    If you use your PC for work, you're really in trouble.

  • How do I stop the caller ID popping up when someone texts me?

    Hi,
    Just been given an iPhone 3 and am v frustrated as every time I receive a text the name of the person texting flashes up on the screen. I have worked out how to switch off the message preview but how do I switch off the name of the person texting?

    "I'm sorry, but that is not a satisfactory response. "
    You asked. He answered.
    ". Does Apple think we need to respond to incoming text messages the second they arrive?"
    There is now way to know what "Apple thinks", unless they announce it.
    You can leave feedback for them at: http://www.apple.com/feedback
    " Do they not think their iPhone could be used in a professional setting? "'
    Absolutely:
    "Among customers who use their smartphones primarily for business purposes, Apple ranks highest with a score of 803, followed by RIM BlackBerry (724)."
    http://macdailynews.com/2009/10/08/jdpower_apple_iphone_ranks_highest_in_smartphone_user_satisfactionagain/
    "- Apple's iPhone yesterday again took first place in J.D. Power and Associates' smartphone customer satisfaction rankings.
    Thursday's announcement by J.D. Power was the iPhone's fifth consecutive win in the firm's semi-annual ratings."
    http://www.computerworld.com/s/article/9214790/Apples_iPhone_again_tops_J.D._Power_satisfactionranking

  • How can I stop the constant login pop up, How can I stop the constant login pop up

    Everytime I get an iMessage or any notification, I have to login my admin password. I can be in the middle of watching a movie and the Login box will pop up for my admin password. Anyone else have this issue and how can it be stopped in the settings?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste (command-V) into the Terminal window. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "75." Please post it in a reply.

  • How do I stop the Key from popping up everytime I log on to a site with login name and password. This pop up is big and annoying and I'm ready to go back to IE than have that thing pop up huge and annoying.

    The pop up that asks if I want to save this login name and password everytime I login to a site. It is huge and annoying as hell. I just want to have an option to stop it. I know it's there, I don't need to be reminded everytime and if I wanted it to remember I would use it. Give me a break.

    For anyone coming in to find this, I located my answer here:
    [Special Applet Attributes|http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/special_attributes.html#codebase]
    Thanks for reading.
    Sorry for the interruption.

  • How do I stop the codec performer pop up page from coming up?

    It continues to pop up. I tried the suggestions but it still comes up.

    See this article. <br />
    http://malwaretips.com/blogs/please-install-codec-performer-update-removal/

  • How do i stop the new file pop up when i start the program

    Everytime I start up Photoshop Cs6 either by opening a file or just the program in general i get a new window pop up each time, this is very annoying. I have tried resetting preferences but this method does not work and i have tried contacting adobe support but all they do is insist i waste money calling premium numbers

    I am using windows 7. Everytime i open a file it always pops up it didnt used to do this

  • How do I stop the menu from showing up when I hover to the top of a full screen app?

    I am running Parallels in full-screen on Lion and when I move the cursor towards the top of the full screen app the menu pops up. How do I stop the menu from popping up? I keep hitting an icon on the menu bar that pulls it out of full screen mode and it's getting very annoying. Thanks.

    Use VMware Fusion? But seriously, Fusion does what you want. It just puts a mini VM control menu at the top when running full screen (and that's configurable, too), so the main menu bar doesn't appear at all. Which means that it's up to Parallels to handle this. Are you running Parallels 7, which is designed for Lion? If you are and Parallels still doesn't offer something similar, you need to contact Parallels.

  • Can I stop the install? Stuck in a reboot cycle

    How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess. Command R, option command, shift at the chime.... None of these things work.

    Did you boot from the DVD? Did you do this:
    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • How do I stop the check plug in page from popping up every time I double click the firefox desktop icon?

    Two pages pop up when I double click the firefox icon on the desktop, the home page and the check plug in page. How do I stop the check plug in page from repeatedly popping up when I double click the firefox icon?

    ''I uninstalled AOL IM and disabled MetaStream 3 Plugin but that didn't work either. I don't currently have viewpoint media player that I'm aware of. ''
    '''''MetaStream 3 Plugin''' MetaStream 3 Plugin r4 Unknown plugin Research''
    This is apparently the Viewpoint Media Player plugin '''npViewpoint.dll'''. Even though you don't see the Viewpoint Media Player listed in your list of installed programs, it might be listed as a different application.
    Disabling the MetaStream 3 Plugin in the Firefox Add-ons Manager removes it from the about:plugins list but apparently does not stop the PluginCheck from finding it. You should re-enable the MetaStream 3 Plugin in the Firefox Add-ons Manager list of plugins. You can then find and remove the plugin file '''npViewpoint.dll''' from your computer, using the following instructions, from this thread at mozillazine:<br>
    http://forums.mozillazine.org/viewtopic.php?f=38&t=2224319 Plugin check is happening with each start up
    '''Winston_Smith wrote:'''<snip>
    The Plugin Check page listed about eight plugins with status listed as "unknown plugin." It turns out that the very last one on the list, ''''MetaStream 3 Plugin'''', which dated all the way back to 1/13/2004, was the one triggering this "Update" Nag. Here's what I did.
    #Enter about:config into the address bar
    #Locate the preference 'plugin.expose_full_path' by typing it into the filter bar
    #Toggle that preference true (right click, toggle)
    #Enter about:plugins in the address bar
    #The resulting "Installed Plugins" list will now show the full path and file name of the associated plugin DLL file.
    #Simply go to the directory of the suspect plugin (using Windows Explorer or whatever) and rename the DLL file (I just appended '.OLD' to the DLL file name, e.g., ''''npViewpoint.dll'''.OLD')
    #Quit firefox (file, exit) and restart.
    #If you don't get redirected to the Plugin Check page then problem solved. If you do get redirected to the Plugin Check page then the plugin you just nuked (by renaming the DLL file) should be gone from the list.
    #Repeat with the other "unknown plugins" until you don't get redirected upon Firefox startup.
    -----

  • The "Install Flash Player.app keeps popping up on my desktop even after ejecting it -MacOS10.9

    The "Install Flash Player.app keeps popping up on my desktop even after ejecting it - I'm running MacOS 10.9 and a registered user of Creative Cloud. The install app is an older version and won't install because I'm already running a newer version. How do I get rid of this installer?

    Test your flash by going to this link, http://www.adobe.com/software/flash/about/

  • How do I stop the onscreen keyboard from popping up when I click on a text box?

    I have a yoga 2 pro and the onscreen keyboard is irritating. How do I stop it from popping up every time I touch the screen? I am only touching the screen to get to the spot where I want to type--- I don't want the onscreen keyboard.
    Sometimes it obscures the screen so I can't get to the right spot. Usually it disappears when I start typing, but sometimes I'm not even trying to type-- I'm trying to select something and I can't see it any more because the keyboard has popped up. I close the keyboard to get it out of the way, but it pops up when I try to touch the screen again. So I can never get to the spot I want unless I absolutely hit the exact spot on the first try. It happened even while typing this. I wanted to touch a certain spot in the paragraph, but then the onscreen keyboard popped up and I couldn't see the paragraph any more.
    Thanks,

    Hoov wrote:
    Did you turn off any of the Lenovo software?
    I closed a random McAfee process via the task manager in an attempt to stop the notification from popping up every ten minutes telling me to restart. 
    I also deleted a lot of the tiles from the colorful windows screen. I think some of them were Lenovo apps. They all seemed to be for some specific purpose though, that I knew I would not use. I have forgotten what they were. I did not delete many-- only a few that I knew right off that I would never use. Could that have affected something?

Maybe you are looking for

  • What's the difference between transport route and transport layer

    what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

  • How to print #ITEM.TYPE# DISPLAYNAME in an html/dynamicpage portlet.

    Hi, I want to print the item type displayname. The available placeholder is #ITEM.TYPE# but it prints the NAME column in WWSBR_ITEM_TYPES. I want the DISPLAY_NAME column that makes more sense IMHO. Any ideas? And if this can't be done, any idea how t

  • File Quarantine Message Removal Query

    Dear Forum, I am currently using TextWrangler in a non-admin 10.6.4 account to look into the files of a WP installation, however every time I try to open a new .php, the file quarantine message pops up, however as I have already installed the blog an

  • Verifying a list of same events

    Hi, I am writing a test method to verify playing a list of video. Each time a video is played, player sends "playing" event out. So my code would just listen for that event from the player. In addition, player implementation is asynchronous by nature

  • Urgent !!!!!!!! E recruiting - Candidate Search not working

    Hi experts, Candidate search of e recruiting is not working. As there are many candidates available in the system still its giving 0 search result. I am not getting why this is happening. Is there any spro setting required?? Is TREX must for this?? I