How do I stop white screen at start up

Can anyone help, my iMac is about 5 months old, has latest software. I've unplugged all peripherals, Internet etc, just keyboard left. I have to use the power button to start, I get the sound, symbol, a bar shows fir few secs, then that fades and I'm left with spinning fan. I tried the Apple care DVD too, now stuck in there. It gets hots, fans running, will stay that way for hours. Any suggestions, other than chuck and go back to pc?

Sorry to read this David
You could also reset SMC if you haven't already: http://support.apple.com/kb/ht3964
Yeah, phone support or a local Mac Guru may be your best bet at this point. If you do find a resolution I'd be interested to read about it here. Good luck, post more questions if you have them.
Hang in there!
Jake

Similar Messages

How to get past white screen after start up

.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

My computer has a white screen at start up and sits for hours. How can I fix my computer?

My computer has a white screen at start up and sits for hours. How can I fix my computer?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HOW DO I CORRECT A WHITE SCREEN UPON START-UP?

HOW DO I CORRECT A WHITE SCREEN UPON START-UP?

Festus,
I'm getting you have a MacBook rather than an iMac, if so you may want to request to have your post moved to the correct forum. However please read Gray screen appears during startup to begin troubleshooting your problem.
Also when posting please do not type in all caps, it is considered shouting. We can "hear" you fine.

I can't get past white screen when starting up, any ideas?

I Can't get past white screen when starting up, any ideas

http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
===============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

How can I stop my screen from going on and off when I play games ?

HOw can I stop my screen from going on and off all the time when I touch it.

Maybe it is a hardware problem, but you will not know that unless you start eliminating all possible software issues. Try this. Close all apps in the recents tray and reboot your iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS2376 i have multicolored vertical lines on white screen after start up

i have multicolored vertical lines on white screen after start up on macbook. how do i fix this?

i have the same problem with my iphone 4s, im just waiting for it to die from battery but try rebooting,restarting or charging it

How to resolve iMac white screen

Hi does anyone know how to resolve an iMac that sticks at a white screen on start up?

Have a look here:
http://support.apple.com/kb/ts2570
If it doesn't resolve the problem post back and I'm sure you'll get plenty more help.

How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012, How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012

How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

How do i stop the screen from rotating on my iphone

how do i stop the screen from rotating on my iphone when i move the phone from horizontal to vertical

You can lock your screen from rotating. Double-click the home button, then slide your finger to the right until your get to the iPod section. There you click the icon on the left and that will lock your screen. You can unlock it the same way.

How do I stop Itunes from automatically starting?

Itunes automatically turns on when the computer is powered up, but Itunes is not in the startup folder.
How do I stop Itunes from auto starting?

10 minutes later: iTunes will not startup if the iPod is not plugged in upon boot up. If the system sees the iPod plugged in upon boot, then system will start. This seems to be done with the help of iTuneshelper.exe and /or iPodService.exe. if you don’t want iTunes to start automatically when the system boots do not have your iPod plugged in. if you want to be able to keep the iPod plugged in then you are going to have to msconfig at the start run command and stop the iTuneshelper.exe in the startup service area. This should stop the iTunes from starting up when the unit is plugged in and you are booting up. Sorry for the long sentences but thats a possiable fix, enjoy.

Hi, how can I stop my screen from freezing up.Its acts like a scratch card, I use the mouse cursor to rub away to find the password box?

HI,how can I stop my screen from freezing, It acts like a scratch card,I run over it with the mouse to scratch away at the grey screen to find the password box
underneath?

OS X: Login window partially appears, cursor movement redraws screen

How do i stop black screen from media playback

how do i stop black screen from media playback?

You mean. as in when you put the phone on your face when you are talking?
It goes dark so you will not open apps are press other controls while the phone is pressed to your face.
Don't be rediculous.

HT4890 How do I stop the screen from rotating, I am new to IPad

How do I stop my screen from rotating when I am using it

There are a few ways to get the screen to "enlarge", so it depends on what you are doing to make it happen.
For example, on a trackpad you can double-tap (not click) with two fingers to zoom in web pages. Or you can slide two fingers in a spreading out fashion to zoom in.
Do you have any notion about what you are doing when the undesired enlarging occurs?
charlie

How do I stop the Adobe Photoshop Starter Edition ...

Every time I plug my N70 into my PC (Windows 2000), the Adobe Photoshop Album Starter Edition 3.0 starts, displays the images and clips on the phone and asks me to save them to my PC. I just want to sync my Contacts and Calendar on connection and sync my images only as and when I _want_ to. How can I stop the Adobe Photoshop Starter Edition from STARTING?

19-Jul-2006 10:21 AM
sysinit wrote:
Hi GenKi,
Ogenki desuka?
First right click on the Adobe Photo Downloader, and then select disable. Think that should do the trick. Did that 2 months back, so I can't really recall well.
Hope this helps. Jya. ^_^
Hi,
I can't find the disable button. Can anybody help me?
Thx.

How do I stop white screen at start up

Similar Messages

Maybe you are looking for