How do I straighten out a leaningn image

Please tell me how to straighten out a leaning image in photoshop? Thanks.

Quickest way? If using Photoshop CC: Click the Crop Tool. Hover your mouse a little outside one of the corners of your image. Click and drag in the appropriate direction. You can also use the "straighten" option on the option bar to, say, draw a line where it needs to be horizontal (or vertical).

Similar Messages

  • How can you find out an individual image size from multiple images on a canvas

    This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
    Thanks

    I want to know they exact dimensions though. You can get them by dragging to the 0,0 corner and then reading off of the ruler scale on the sides but its fiddily as you have to zoom right in and work it out. I know in photoshop there is a ruler but is there any other way in Elements?

  • How do I straighten out my account?

    We upgraded my wife's phone to a new iPhone, but when we got it and I tried to activate it I ran into issues - the phone (which was connected to our internet router) kept telling me it couldn't connect to the server and I should call the activation phone number. After 5 or 6 times being put on infinite hold, I finally got through to someone who then called her supervisor and between them they activated the new phone. Great, all is well, and the phone works well except that anytime I go online to see about modifying my plan, I get the following message: Our records indicate you recently purchased a device for this line of service but have not activated the device yet.  You have the option to change your calling plan after you have activated your new device, or you may contact Customer Service at (800) 922-0204 for further assistance. The correct iPhone is shown in the picture but it's grayed out and I can't do anything. Calling customer service just puts me on hold forever. I haven't had these kinds of issues with Verizon in the past and don't know why they're starting now, but I'd really like to get my account straightened out.

    OK, this is exactly what happened:
    The Verizon Wireless site would allow me to order a new phone at a reduced cost a month before the contract expired, but 2 weeks later it wouldn't allow me to do that anymore. So I went direct to the Apple site and it checked with Verizon and came back and said I qualified to get the phone for $99. So I placed an order. The phone came 3 days later, on schedule. It was Friday afternoon. That night I started it up and connected it to my wifi. It then said it could not connect to the server and I should try again. There was nothing wrong with the wifi since I had 3 other things using it at the time. I tried to activate it by going to the Verizon site but it just showed my wife's old phone grayed out with a message that I had to activate the new phone first. Finally the iPhone got through to the server and all seemed well. It then told me I had to finalize the activation by calling an activation phone number. After a few tries I got through. The woman said she would help but then said something was wrong and she got her supervisor. He got on the phone and said he would fix it, and after a minute or 2 the activation took hold and all was well. Since then the phone has performed well, but when I went to the web site I couldn't even see my plan details. I tried a couple more times and got nowhere, and each time I called customer service after listening to the computer for a while trying to sell me things, I would choose an option and get put on hold and finally would give up. That's when I posted my note. Perhaps things are straightened out now, I don't know, but after 20 years with Verizon Wireless I wasn't expecting all these problems.
    Thanks for helping.
    Barry
    >>Personal information removed to comply with the Verizon Wireless Terms of Service<<
    Message was edited by: Verizon Moderator

  • How can I print out a Panorama image to fill up the paper

    I have a HP Officejet Pro 8500A printer and have taken a picture in the Panorama setting and want to print it out on a 4x6 but have it fill up the complete 4x6 paper, not just the center part of the paper. Can this be done without losing quality and if so, how?? I am running Windows Ultimate 64 bit

    Hi if the picture is high res enough you can fill up the page without to much quality loss, should be a question of playing with the settings, you are however goin to lose a part of the picture or stretching the image. A better option might be purchasing some HP panorama paper.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • How to zoom in/out AND resize image?

    sorry if they are stupid questions but i can't seem to find how to resize and image and zoom in/out. I am using Version 3 of Photoshop Album Starter Edition.
    thanks in advance.

    Don't know what you want to do...
    Resize the actual image file? If so, PSA SE can't really do that.
    Just look at an image at different magnifications? Select image, F11 for full screen, then use CTRL/+ and CTRL/- to adjust.

  • How do I clear out a previous image

    I had been using the .SetSize 0,0 successfully, until the images got larger then 8192 x 25000 at which time I get not enough memory errors.

    You didn't say much about your problem. Clear out the image from what? A specific control? I can tell you that 8192 x 25000 is an enormous amount of graphics to try to load into memory and I'm not surprised you are getting memory errors. Tell us a little more about what you are doing and we may be able to help.
    Best Regards,
    Chris Matthews
    National Instruments

  • How can i print out a larger image of my VI on standard printer paper?

    When I select the scale to fit option for my block diagram when attempting to print, the image that is printed is too small for my purposes. However, when I uncheck the scale to fit option for the block diagram, my VI is too tall to be displayed on one page. Is there anyway to scale the image differently while printing? Any help is appreciated. Thanks.

    You should design you front panel to more closely match the aspect ratio of the paper.
    A possible solution would also be to create a special subVI with the desired print layout. Whenever you want to print, call it with the current display data and make sure to set it to "print when complete".
    LabVIEW Champion . Do more with less code and in less time .

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • How do you cut out the part of an image in a photo?

    How do you cut out a part of an image on a photo that you have added to Pages. For example, if I have added a picture of a giraffe to Pages how would I cut out the giraffe from the image and get rid of the rest of the image

    You can use the instant alpha tool to make the background transparent.
    FYI: Pages is part of iWork, not iLife.

  • I just upgraded to the latest software for my pages.  When I opened an old document it stripped out all the images I had in my tables.  How do I get them back

    I just upgraded to the latest software for my pages.  When I opened an old document it stripped out all the images I had in my tables.  How do I get them back

    Don't save. Close the documents.
    Pages '09 should still be in your Applications/iWork folder.
    Pages 5 will damage/alter older files, something Apple didn't tell its users.
    Pages 5 is a severely stripped down version with over 90+ features removed.
    We recommend trashing/archiving Pages 5 after Exporting any files you may have saved back to Pages '09.
    Also rate/review Pages 5 in the App store.
    Peter

  • How do I clean out the "Open With" dialog box when I right click an image?f

    Hi,
    When I right-click and image to open it in a program I get a long list of programs to choose from. Many are duplicated or the same program but different version #s like Preview. How do I clean out the dupes and ones I don't want and keep the ones I do?
    How would I add CS3's Adobe Camera Raw to the list?

    Do a search for details on cleaning up the "open with" dialog, it's been discussed before but I'm sorry I can't remember what the fixes are.
    I have duplicate choices too but have never tried to clean them up.
    Regards,
    Steve M.

  • How do i make a cut-out of an image?

    How do i make a cut-out of an image?

    Pages has an instant alpha tool.  Works well.  May be what the OP wants.

  • How do i crop "out" a piece of image=ex: how it will look when its cut for a window. Crop a white space in image?

    How do i crop "out" a piece of image=ex: how it will look when its cut for a window. Crop a white space in image?

    I think this will help if you are using version 11 or 12.
    Make a selection with a selection tool of the area you want to remove.
    Example: rectangular marquee tool - make a rectangle.
    Use Select>Refine Edge:
    Use the View section of this dialog box to see a few views.
    If you need to refine the edge of the selection (smooth, feather, shift, etc.) you can do that in this dialog box.
    You may want to check the box about remembering your settings in case you need to come back to them.
    In the Output section, you can pick New Layer with Layer Mask and click OK.
    You should see the hole in your image.
    Kathy Keith
    @kathleenmadeline on Instagram
    (I teach Photoshop Elements classes)

  • ImageIcon : How can I find out if image is loaded correctly?

    How can I find out if image is loaded coretly? (see example)
    private Image img;
    img = new ImageIcon("C:\image.jpg").getImage();
    If path is wrong, there is no exception or null in img.
    Thanks....
    Message was edited by:
    ptibull77

    also from the ImageIcon docs (note the ERRORED and ABORTED):
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/ImageIcon.html#loadImage(java.awt.Image)
    getImageLoadStatus
    public int getImageLoadStatus()Returns the status of the image loading operation.
    Returns:
    the loading status as defined by java.awt.MediaTracker
    See Also:
    MediaTracker.ABORTED, MediaTracker.ERRORED, MediaTracker.COMPLETE

  • How to (zoom in\out) on nokia e5 on images/photos

    how to (zoom in\out) on nokia e5 on images/photos ??
    I cant find zoom or any key to zoom any idea ??
    Solved!
    Go to Solution.

    Hello nour_esmat, did you try the volume buttons and the direction buttons? Try and reply.
    Nokia C7

Maybe you are looking for