How do I submit xml data from a form to live cycle

Hi
This is my first post, so I'm not sure if this is the right forum.
I have a flex app, which calls a pdf. You enter the info on the pdf and then click submit. Now I need to know what i have to do to submit the information (not via email)to a live cycle process and which live cycle process I must submit it to?
I'm assuming I must using some sort of servlet to submit the info?
Any help would be greatly appreciated.
Thanks
Ross

Hello Ross,
Yes, you need a servlet that gets the submitted info from PDF, and then that servlet internally need to invoke your process.
There are couple of ways you can submit the data to your servlet, either as PDF/XML/XDP. If you are looking for submitting PDF/XDP, then one need to have either Acrobat S.W (Standard or Professional) or you need to apply ReaderExtensions on those PDFs.
Hope I answered your questions.
Regards
Sivajee

Similar Messages

How can I get xml data from KM?

Hi guys,
how can i get a xml data from KM?
I saved an xml document in KM, and I want to read its content. How can I get this document?
Using
DocResource = (IResource) resFactory.getResource(RID.getRID("Document/ Path"),resContext)?
I want to know which kinds of API of KM are responsible for this.
Thanks in advance
Regards,
Liying

Hi Liying
use this code.
try {
               IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
               IUser sapUser = wdClientUser.getSAPUser();
               com.sapportals.portal.security.usermanagement.IUser ep5User =
                    WPUMFactory.getUserFactory().getEP5User(sapUser);
               IResourceContext resourseContext = new ResourceContext(ep5User);
               IResourceFactory resourseFactory = ResourceFactory.getInstance();
               RID pathRID =
                    RID.getRID(
                         "/documents/"(Path to folder where ur file is"");
               ICollection collection =
                    (ICollection) resourseFactory.getResource(
                         pathRID,
                         resourseContext);
               IResourceList resourceList = collection.getChildren();
               IResourceListIterator resourceListIterator =
                    resourceList.listIterator();
while (resourceListIterator.hasNext()) {
                    com.sapportals.wcm.repository.IResource resource =
                         resourceListIterator.next();
try {
                         /*File from KM Reading*/
                         InputStream in = resource.getUnfilteredContent().getInputStream();
                         ByteArrayOutputStream out = new ByteArrayOutputStream();
                         byte[] buffer = new byte[4096];
                         int bytesread = 0;
                         while ((bytesread = in.read(buffer)) != -1) {
                              out.write(buffer, 0, bytesread);
                         String dataToBeConvertedToXML = out.toString();
catch(Exception e){}
catch(Exception e){}
Award points if found usefull.
I suppose you have used KM sharing reference in ur application
Regards
BP

How can i get xml data from html

Hi
i need to submit data from an html form to server via xml.
( ie data shold be in xml format instead of POST/GET methods )
how can i can i make this happen ?
Renjith.

read the excellent suggestion from mochamaniac (reply 2 of 5): http://forum.java.sun.com/thread.jsp?forum=34&thread=303120
ps. next time run a search on the forum prior from posting ;-)

How i can transfer XML data from internet to SAP R/3?

Hi all,
I have an issue to catch data from internet (perticular website) in xml format and i want to update that xml data format into SAP R/3 database. so how i can do that?
Can I do directly or i should use any third party tools?

Hi Deepak,
Refer these two weblogs,
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
I hope, this will solve your problem
Regards,
Deviprasad

How to run an XML Report from Oracle Forms 10G

Hello Friends,
I am in need of showing a xml report output through a button press trigger in Oracle Forms10G.
I have designed the report in XML Publisher and the report looks fine.I found few scripts useful in running the Oracle Report from Oracle forms10G like Run_Report_Object.But I am not aware of any script that could run a XML report and show the output directly from a Form.
All I want is to run a XML report from an Oracle Form with a button press trigger and show the output in an html version.
Can this be achieved?
If so, Kindly advise as this is an immediate work.
Regards,
Badrul.

Hi,
If I am not wrong the XML publisher is same as BI publisher ...
There is one document which explains how to integrate using web service
You want to check this
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
or you can also try web.show_document ..

How to retreive soap xml data from clob column in a table

Hi,
I am trying to retrieve the XML tag value from clob column.
Table name = xyz and column= abc (clob datatype)
data stored in abc column is as below
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:head="http://www.abc.com/gcgi/shared/system/header" xmlns:v6="http://www.abc.com/gcgi/services/v6_0_0_0" xmlns:sys="http://www.abc.com/gcgi/shared/system/systemtypes">
<soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing">
<RqHeader soapenv:mustUnderstand="0" xmlns="http://www.abc.com/gcgi/shared/system/header">
<DateAndTimeStamp>2011-12-20T16:02:36.677+08:00</DateAndTimeStamp>
<UUID>1000002932</UUID>
<Version>6_0_0_0</Version>
<ClientDetails>
<Org>ABC</Org>
<OrgUnit>ABC</OrgUnit>
<ChannelID>HBK</ChannelID>
<TerminalID>0000</TerminalID>
<SrcCountryCode>SG</SrcCountryCode>
<DestCountryCode>SG</DestCountryCode>
<UserGroup>HBK</UserGroup>
</ClientDetails>
</RqHeader>
<wsa:Action>/SvcImpl/bank/
SOAPEndpoint/AlertsService.serviceagent/OpEndpointHTTP/AlertDeleteInq</wsa:Action></soapenv:Header>
<soapenv:Body>
<v6:AlertDeleteInqRq>
<v6:Base>
<v6:VID>20071209013112</v6:VID>

<v6:Ref>CTAA00000002644</v6:Ref>
</v6:Base>
</v6:AlertDeleteInqRq>
</soapenv:Body>
</soapenv:Envelope>
And i want to retrieve the values of tag
<ChannelID> and <v6:VID>
can somebody help, i have tried with extractvalue but not able to get the values

I have used the below two queries but not able to get the expected results. Both queries result into no values.
select xmltype(MED_REQ_PAYLOAD).extract('//ClientDetails/Org','xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" || xmlns="http://www.abc.com/gcgi/shared/system/header"').getStringValue() from ESB_OUTPUT_TEMP where SOAPACTION = '/SvcImpl/bank/alerts/v6_0_0_0/SOAPEndpoint/AlertsService.serviceagent/OpEndpointHTTP/AlertDeleteInq'
select EXTRACTVALUE(xmltype(MED_REQ_PAYLOAD),'/RqHeader/) from ESB_OUTPUT_TEMP where SOAPACTION = '/SvcImpl/bank/SOAPEndpoint/AlertsService.serviceagent/OpEndpointHTTP/AlertDeleteInq'
Well, for starters, both queries are syntactically wrong :
- non terminated string
- incorrect namespace mapping declaration
- unknown XMLType method "getStringValue()"
Secondly, all those functions are deprecated now.
Here's an up-to-date example using XMLTable. It will retrieve the two tag values you mentioned :
SQL> select x.*
2 from esb_output_temp t
3     , xmltable(
4         xmlnamespaces(
5           'http://schemas.xmlsoap.org/soap/envelope/' as "soap"
6         , 'http://www.abc.com/gcgi/shared/system/header' as "head"
7         , 'http://www.abc.com/gcgi/services/v6_0_0_0' as "v6"
8         )
9       , '/soap:Envelope'
10         passing xmlparse(document t.med_req_payload)
11         columns ChannelID varchar2(10) path 'soap:Header/head:RqHeader/head:ClientDetails/head:ChannelID'
12               , VID        varchar2(30) path 'soap:Body/v6:AlertDeleteInqRq/v6:Base/v6:VID'
13       ) x
14 ;
CHANNELID VID
HBK        20071209013112
You may also want to store XML in XMLType columns for both performance and storage optimizations.

Reading XML Data from ABAP Program?

Hi,
How do I read XML Data from an ABAP Program? For example if I have the below basic XML Code-
<xml>
<Name> Thiru </Name>
<Age> 24 </Age>
<City> chennai </Chennai>
</xml>
How do i read the data within the Name,Age, and City tags into variables in the ABAP Program?
Regards,
Thiru

if you decide to do in XSLT, I have a sample list here:
XML file like this:
<?xml version="1.0" encoding="UTF-16"?>
<F>
<P1>
<t_1>value1</t_1>
<t_2>testvalue</t_2>
</P1>
<P2>
</P2>
</F>
XSLT file like this:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sapxsl="http://www.sap.com/sapxsl" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:template match="F">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<<b>DOCUMENT</b>>
<xsl:apply-templates/>
</<b>DOCUMENT</b>>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="P1">
<ENTRY>
<<b>T_1</b>><xsl:value-of select="t_1"/></T_1>
<<b>T_2</b>><xsl:value-of select="t_2"/></T_2>
</ENTRY>
</xsl:template>
</xsl:transform>
ABAP program like this:
DATA: BEGIN OF wa_upload,
text(255) TYPE c,
END OF wa_upload,
itab_upload LIKE TABLE OF wa_upload,
BEGIN OF wa_document,
t_1 TYPE string,
t_2 TYPE string,
END OF wa_document,
itab_document LIKE TABLE OF wa_document.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'XXXXX'
filetype = 'ASC'
TABLES
data_tab = itab_upload.
CALL TRANSFORMATION zrappel_xml_test
SOURCE XML itab_upload
RESULT <b>document</b> = itab_document.
You should pay attention to the bold words.
hope it will be helpful
thanks

Acrobat Professional 8 - How do you open XML sent from an online form?

Hello,
I have a simple question.
How does and end user with the latest Adobe Reader, open up XML data that was emailed to them from an online website form?
Is there a better way of going about this? For example, is it possible to create an online form through (Acrobat Professional and LiveCycle) that will allow the end user to save the PDF to their desktop (with the data nested in the fields) and then email off to the recipient of the form?
Thanks in advance for tips and suggestions.
Regards,
Jim

Hello Aandi,
Yes, I now have the latest Adobe Reader and I believe there are add-ons that can be obtained, but I think you are right, there is no way to import the XML data from a form into the PDF using the Reader. But, I think there is a way to save the original PDF, so that the end user can now save the PDF locally (using the Reader) with data entered into the form. Then, the form can be emailed back to the originator. I think it has something to do with usage right settings in LiveCycle/Acrobat Professional.
Anyway, thanks for your reply. It is appreciated.
-J

Pass the data from a form in workflow to z table

Hi all,
How can I pass the data from a form in workflow to z table?

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

How to generate XML data from Lotus Notes to migrate to SharePoint by passing XML to SharePoint.?

How to generate XML data from Lotus Notes to migrate to SharePoint by passing XML to SharePoint.?
Ramesh S

You could use XMLQuery to return the data from your tables as XML, that would give you a CLOB.
An example using the SCOTT schema might be like this:
SELECT XMLQuery(
         'for $i in ora:view("DEPT")/ROW
          return <Department dname="{$i/DNAME}">
                 <Employee>
                   {for $j in ora:view("EMP")/ROW
                    where $j/DEPTNO eq $i/DEPTNO
                    return ($j/ENAME, $j/JOB, $j/SAL)}
                 </Employee>
                 </Department>'
         RETURNING CONTENT) FROM DUAL;In the docs you can find more information about its use:
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10492/xdb_xquery.htm

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to get/process the Data from XMLSocket?

Hello All,
I'm using Adobe Professional CS6, and Actionscript 3.0.
To start with I have a C# program that basically just feeds data out from a Server in the form of XML data. I then have a Flash program that should receive the data and then I'll do some stuff with it. We had this working in Actionscript 1.0 but we need to upgrade the code to Actionscript 3.0, but instead of just trying to convert stuff over to the new Actionscript version, I'm going to re-write the program.
So far I've basically just defined some EventListeners most of which I found examples of online for using XMLSockets. As of now the Flash program will connect an XMLSocket to the Server that is feeding out the data, and the server feeding the data resends new data every 5-10 seconds or so.
So when a grouping of XML Data comes in on the port I defined, the following Function gets executed for handling the incoming data. For my EventListener's Function for "socket.addEventListener(DataEvent.DATA, dataHandler);" ("socket" is defined as --> var socket = new XMLSocket(); ). So when the new data comes in it executes the above function.
The trouble I'm having is declaring a new variable of type "XML" and then using that variable to pull out individual "nodes/children" from the incoming XML Data. I found an example online that was very close to what I want to do except instead of using an XMLSocket to get data constantly streaming in they use the "URLLoader" function to get the XML data. I know I'm receiving the XML data onto the server because if I set the (e: DataEvent) variable defined in the function "head" to a string and then run a trace on that I can see ALL of the XML data in the "Output Window".
But I can't seem to be able to set (e: DataEvent) to a XML variable so I can access individual elements of the XML data. The example I found (which uses the URLLoader instead) uses this line (myXML = new XML(e.target.data);) to set the XML Variable, which won't work for mine, and if I try to do the same thing in my code it simply prints this for as many lines as there is XML data --> "[object XMLSocket]"
MY CODE:
*I left out the other Functions that are in my code for the EventListeners you'll see defined below, except for the one in question:
                         ---> "function dataHandler(e: DataEvent):void"
import flash.events.IOErrorEvent;
import flash.events.ProgressEvent;
import flash.events.SecurityErrorEvent;
import flash.events.DataEvent;
var socket = new XMLSocket();
socket.addEventListener(Event.CONNECT, connectHandler);
socket.addEventListener(Event.CLOSE, closeHandler);
socket.addEventListener(DataEvent.DATA, dataHandler);
socket.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
socket.addEventListener(ProgressEvent.PROGRESS, progressHandler);
socket.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
var success = socket.connect('server.domain.name.local',3004);
The code in this function was used from an example I found online as described above in the post:
          LINK --> http://www.republicofcode.com/tutorials/flash/as3xml/
// The Commented out code (*in blue) will show ALL the xml data inside the "Output Window":
function dataHandler(e: DataEvent):void {
          // var myStr:String = e.data;
          var xml:XML;
          xml = new XML(e.target.data); //<--- THIS DOESN"T WORK (I DONT THINK 'target' IS CORRECT HERE)??
          if (socket.connected)
                    // trace(myStr)
                    trace(xml);
The Output from the line "trace(xml)" will show this data below in the "Output Window" (*FYI There should be 6 lines of XML Data on each 'update'):
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
Could someone show or point me in the right direction on this. I want to be able to access specific parts of the incoming XML Data.
Here's some sample XML Data:
<MESSAGE VAR="screen2Display" TEXT="CSQ_1" />
<MESSAGE VAR="F1_agentsReady" TEXT="111" />
<MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
<MESSAGE VAR="F1_talkingAgents" TEXT="333" />
<MESSAGE VAR="F1_callsHandled" TEXT="444" />
<MESSAGE VAR="F1_ABDRate" TEXT="555" />
Any thoughts or suggestions would be greatly appreciated..!
FYI:
I'm VERY new to Actionscript/Flash Developing (*about a week now), so go easy on me haha...
Thanks in Advance,
Matt

Hey Guys, thanks ALOT for the replies!!
Andrei1 and Sinious,
The code I show above is actually just what I found in an example online, and its what i was trying to show you what "they" used
in the URLLoader example. I wasn't trying to use URLLoader, but it was the closest example I found online to what I was trying to
do in terms of processing the XML Data, and not how I read it in. So XMLSocket IS definetly what I'm trying to use because the Server
I'm receiving the XML Data from "pushes" it out every 10 seconds or so. So yea I definatly want to use XMLSocket and not URLLoader...
Sorry for the confusion...
The example you show:
     var xml:XML = new XML(e.data)
Is actually what I had in my original code but I couldn't get it to show anything in the "Output Window" using the trace() method on
it, so I assumed I wasn't doing it correctly...
What my original code was in the "dataHandler()" Function was this:
function dataHandler(e: DataEvent): void
    var xml: XML = XML(e.data);
    if (socket.connected)
        trace(xml);
        msgArea.htmlText += "*socket.connected = TRUE\n"
    } else {
        msgArea.htmlText += "*socket.connected = FALSE\n"
OUTPUT:
And what I get when I run a Debug on it is, in the "msgArea", which is just a simple Text Box w/ Dynamic Text on the main frame it prints:
    "socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE"
It prints that message 6 times in the msgArea for each XML Message that comes in (*which I think 6 times because there
are 6 "sections/nodes" in the XML Data). But then NOTHING prints in the "Output Window" for the "trace(xml)" command.
Not sure why nothing is showing in the "Output Window", maybe the XML is not complete? But I could see data in the "Output
Window" when I set "e.data" to a string variable, so I know the Data is reaching the program. Since I could see the XML Data in
a string variable, does that mean I can rule out that the XML Data coming in is considered a "complete" XML Document?
Because I wasn't sure if to be considered a complete XML Document it would need to have this included in the message..?
                    "<?xml version="1.0"?>"
For the tests I'm running, one single XML message which is being pushed out from the server looks like this:
<MESSAGE VAR="screen2Display" TEXT="Call_Queue_1" />
<MESSAGE VAR="F1_agentsReady" TEXT="111" />
<MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
<MESSAGE VAR="F1_talkingAgents" TEXT="333" />
<MESSAGE VAR="F1_callsHandled" TEXT="444" />
<MESSAGE VAR="F1_ABDRate" TEXT="555" />
Would I need to include that "Header" in the XML message above?
               i.e. "<?xml version="1.0"?>"
Or do I need to be more specific in the trace command instead of just using "trace(xml)"?
Also yes, I already have a Flash Policy file setup and working correctly.
Anyway, thanks again guys for the replies, very much appreciated!!
Thanks Again,
Matt

How can I enter the data from the recordset into your insert query

Hi
i would like to know how I can enter the data from the recordset into your insert query without using a hidden field.
thanks
------------------------------------------------------------------------------------Below is the code------------------------------------------------------------------------------------- -----
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
   $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
   $insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
                       GetSQLValueString($_POST['com_topic'], "int"),
                       GetSQLValueString($_POST['commentby'], "int"),
                       GetSQLValueString($_POST['title'], "text"),
                       GetSQLValueString($_POST['com_content'], "text"),
                       GetSQLValueString($_POST['com_date'], "text"),
                       GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsTopics = "SELECT topic_id, topic FROM topics ORDER BY topic_date DESC";
$rsTopics = mysql_query($query_rsTopics, $ezzyConn) or die(mysql_error());
$row_rsTopics = mysql_fetch_assoc($rsTopics);
$totalRows_rsTopics = mysql_num_rows($rsTopics);
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsOnline = "SELECT online_id, `online` FROM `online` ORDER BY online_id DESC";
$rsOnline = mysql_query($query_rsOnline, $ezzyConn) or die(mysql_error());
$row_rsOnline = mysql_fetch_assoc($rsOnline);
$totalRows_rsOnline = mysql_num_rows($rsOnline);
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsCommentby = sprintf("SELECT user_id, username FROM users WHERE username = %s", GetSQLValueString($colname_rsCommentby, "text"));
$rsCommentby = mysql_query($query_rsCommentby, $ezzyConn) or die(mysql_error());
$row_rsCommentby = mysql_fetch_assoc($rsCommentby);
$totalRows_rsCommentby = mysql_num_rows($rsCommentby);
?>
<?php include("../includes/access.php"); ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>ezzybay - easy click, ezzy shopping</title>
<link href="../css/global.css" rel="stylesheet" type="text/css" />
<link href="../css/navigation.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<?php include("../includes/top.php"); ?>
<div id="content">
<div id="pageTitle">
    <h2>CMS Section:</h2>
    <p>Comment Topics Page</p>
</div>
<?php include("../includes/leftnav.php"); ?>
    <div id="mainContent">
      <form action="<?php echo $editFormAction; ?>" method="post" name="frmpostComment" id="frmpostComment">
        <table align="center">
        <caption>Post Comment</caption>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right">Topic:</td>
            <td><select name="com_topic" class="listbox" id="com_topic">
              <?php
do {
?>
               <option value="<?php echo $row_rsTopics['topic_id']?>"><?php echo $row_rsTopics['topic']?></option>
              <?php
} while ($row_rsTopics = mysql_fetch_assoc($rsTopics));
$rows = mysql_num_rows($rsTopics);
if($rows > 0) {
      mysql_data_seek($rsTopics, 0);
      $row_rsTopics = mysql_fetch_assoc($rsTopics);
?>
            </select></td>
          </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right">Title:</td>
            <td><input name="title" type="text" class="textfield" value="" size="32" /></td>
          </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right" valign="top">Comment:</td>
            <td><textarea name="com_content" cols="50" rows="5" class="textarea"></textarea></td>
          </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right">Status:</td>
            <td><select name="online_id" class="smalllistbox">
              <?php
do {
?>
               <option value="<?php echo $row_rsOnline['online_id']?>" <?php if (!(strcmp($row_rsOnline['online_id'], 2))) {echo "SELECTED";} ?>><?php echo $row_rsOnline['online']?></option>
              <?php
} while ($row_rsOnline = mysql_fetch_assoc($rsOnline));
?>
            </select></td>
          </tr>
          <tr> </tr>
          <tr valign="baseline">
            <td nowrap="nowrap" align="right"> </td>
            <td><input type="submit" class="button" value="Insert record" /></td>
          </tr>
        </table>
        <input name="commentby" type="hidden" id="commentby" value="<?php echo $row_rsCommentby['user_id']; ?>" />
        <input type="hidden" name="com_date" value="<?php echo date("d/m/y : H:i:s", time()) ?>" />
        <input type="hidden" name="MM_insert" value="frmpostComment" />
      </form>
    </div>
</div>
<?php include("../includes/footer.php"); ?>
</div>
</body>
</html>
<?php
mysql_free_result($rsTopics);
mysql_free_result($rsOnline);
mysql_free_result($rsCommentby);
?>

I'll keep it simple and only use the date as an example. Hopefully you get the concept from the example. Basically you create a recordset and insert the recordset value instead of the POST value into your insert query. In the example below I declared a variable for $the_date and entered the variable into the INSERT query instead of the hidden POST field.
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
   $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$the_date = date("d/m/y : H:i:s", time());
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
   $insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
                       GetSQLValueString($_POST['com_topic'], "int"),
                       GetSQLValueString($_POST['commentby'], "int"),
                       GetSQLValueString($_POST['title'], "text"),
                       GetSQLValueString($_POST['com_content'], "text"),
                       GetSQLValueString($the_date, "text"),
                       GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
?>

How can I pass data from a form guide to another form in a business process

How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.

Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide. This could be either version ES1, ES2/2.5 or ES3/ADEP
If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES.
You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity

How do I submit xml data from a form to live cycle

Similar Messages

Maybe you are looking for