How do i successfully reinstall lion as i can't use my mac now
I wiped my MacBook Pro and went to reinstall lion. About 3/4 of the way through it told me to restart my mac and when i done that internet recovery came up and when that was finished it went back to the lion recovery page. I seem to go round in circles. How can I stop this and reinstall lion successfully?
Are you using the Internet Reccovery system?
I would start that. depending on what model Mac you have try Command+Option+r keys to boot the computer from the internet. Then open Disk Utility and erase the Complete drive, not just the Macintosh HD partition. Once that is done proceed with the install of Lion.
Similar Messages
-
Seems like a silly question but I had an appointment at my local apple store about a start up issue, ran some tests and passed them which was fine.
After this, I was left to reboot my mac and basically transfer files from my harddrive onto my macbook. However, I couldn't choose the files to be transferred and so I went with the reboot and the startup issue I initially had was fixed, although I need the files from my hardrive to be transfered onto my mac.
There are backups and documents I need.I'm not sure I understand, but are you asking how to copy files from your external drive? Open two Finder windows. In one find the files you want to transfer, in the other where you want to put them. Select the file and drag it over.
-
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated
Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself. -
When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, RichIn order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.
-
Hey, can i use the mac remote control on the new imac 2013? if so, how?
hey, can i use the mac remote control on the new imac 2013? if so, how?
No,
The new iMacs no longer have an IR receiver.
If you want to control your iMac remotely.
If you own an iPhone, iPod Touch or iPad.
Here's an app
http://regularrateandrhythm.com/apps/rowmote-pro/
or this
http://www.amazon.com/Satechi-MediaRemote-Bluetooth-Multi-Media-Control/dp/B0082 4948U/ref=sr_1_10?ie=UTF8&qid=1364328484&sr=8-10&keywords=Satechi
http://www.amazon.com/Satechi-Bluetooth-Pointer-Presenter-Control/dp/B00A3WRM5G/ ref=sr_1_1?ie=UTF8&qid=1364328551&sr=8-1&keywords=Satechi+Remotes -
After I installed OS X Mountain Lion system, I can't use my Safari to log into my online banking and some other websites which require passwords. Can some one please help?
It could be browser incompatibility or something else. When you say you can't log in, what happens? Is the bank website generating an error saying you're not using a supported browser? Does the login form for your bank account display as usual, but once you submit the form to log in it doesn't work? Give me a specific step-by-step of what you're doing, such as...
1. I load bankofamerica.com
2. I type in my login
3. When I submit, the page does nothing
Obviously that may not be your issue, but giving us details like that will help us come to a quicker conclusion. -
Appleworks does not work with mountain Lion. What can I use for drawing and painting?
Appleworks does not work with mountain Lion. What can I use for drawing and painting?
MacBook
MarianPlease see this article which examines various possible alternatives to AppleWorks:
http://rfwilmut.net/aw -
How does the backup file that I would like to use for restore now require a password
How does the backup file that I would like to use for restore now require a password, when I just Backed it up on 10/30/14
It requires a password to restore from it because at some point, you checked the box in iTunes to use encrypted backups, at which point you were prompted for, and set a password.
If you now can't remember what that was, then you can not restore from that backup. -
I have a creative suite 6 Design & Premium (student and teacher).
Today something wrong with the illustrator, it didn't work at all. So i uninstall it.
Now i am trying to reinstall it, But I can't use the serial number that i got before to activate it. What should i do?
thank you!if you see an invalid message, Error "The serial number is not valid for this product" | Creative Suite
otherwise, quote the error message or attach a screenshot. -
How do I unlock my Iphone so it can be used on any network?
How do I unlock my Iphone so it can be used on any network?
You have to request this from the carrier (operator) the phone is locked to. Not all carriers offer authorized unlocking, you can check here to see if yours does: http://support.apple.com/kb/HT1937
-
bought an iTune card when I took the paper off the card the glue took part of the pin numbers. The card should be able to be scaned, how can I use this card now Ralphs can't help thats were I bought the card
iTunes Store: Invalid, inactive, or illegible codes
-
It is power mac 2 x2.8 GHz Quad core intel xeon running 10.7.3 - purchased in 2006
Or how can I transfer the appliucations form my laptop?Ok. I have 2 hard drives and one of them died apparently so..not knowing what to do, I did chose reinstall Lion after command r open start-up. The whole thing is a mess but my computer is back up and running with the second hard drive. I had a time machine backup which I've been dragging stuff out of. i had to re enter serial numbers and do all sorts of initial set up stuff. 1) How do I get all of my icons (like my HD icon and external drives icons) to appear on my desktop again? I can only find them through a finder window. 2) i now have to type a password to get into my computer (user) - I 'm the only user and don't want to have to do that.
-
How do you format/reinstall Lion on an iMac which came with no disc?
Hi,
How do you format and reinstall Lion on a iMac which came with no disc? It was purchased new from an Apple store but came with no disc.https://discussions.apple.com/thread/4177979 - Reinstalling Lion on a computer that originally came with Lion installed.
How to deal with future problems without a Lion Install Disk - https://discussions.apple.com/thread/3552183
How to reinstall Lion on a new drive? - https://discussions.apple.com/thread/3570140 -
Reformated hard drive and reinstalled lion still not able to use lion recovery asst.
I reformated my HD and reinstalled lion 10.7.1 and I am still unable to use the lion recovery assitstance app it's telling me no recovery partion?
I bought an external HDD to install the OS X Lion on it, then reformatted entire Macbook HDD, followed by restore image from external HDD to the Macbook build in HDD.
now the external HDD is a working Lion OX & Macbook also running smooths
Maybe you are looking for
-
What is the concept of multiple projects
Hi All, We have multiple development projects and support as well. Now my problem is say in Project1 we are working on OBJECT1, simultaneously the support team is also working on the same object (which is unknown to us). Now while transporting OBJECT
-
Oracle 9i RMAN backup intrigation with OSB 10.3
Hi expertise, I want to add rman backup process(script) to OSB scheduling as like filesystem backup. Admin Svr: Windows 2003 Media & Client: Solaris 10 DB: oracle 9i thanks advance
-
Table of Rates Used in Projects
Hi We're reviewing Rate Utilization and I'm trying to determine if some Rates have ever been used in any of our projects. I'm guessing the simpliest way would be to query a Table. Does anyone know which Table I should be looking at, this would be for
-
Login Language vs Vendor Comm. Lang ME21N
Hi, A user logs in with EN language, and the vendor V1 has DE as communication language. Material "M1" has descriptions in both languages. When user places PO in ME21n against V1 and for article M1, description is shown in DE in ME21n. Is there any u
-
Regds infotype ..
Hai , Why Hr module only Supports LDB and Infotype ... what about other modules ?