How do I switch back and forth between phones

My daughter has a new phone (no data) and she wants to switch back to her old phone temporarily. I logged into my Verizon, picked the activate a device option, and then when I get to the next screen it automatically picks MY phone to activate even though I select her number. My question is this. If I turn her new phone off, dial *228 on her old phone, is that is all that is required? I have been able to do it from the website in the past, but for some reason it won't let me any longer. I don't mind calling them, but she will be needing to move her service back and forth quite often, so I would like to find a better way. Any advice?

The option of calling *228 and choosing option 1 should work. And as you stated, shut off the active phone first.

Similar Messages

How do I switch back and forth between Roku and Verizon FIOS TV?

I just purchased a Roku 3500R Streaming Stick (HDMI). I set it up with no problem. What I can't figure out is how to switch easily between viewing the Roku and viewing regular TV. The only way I was able to get rid of the Roku screen was to unplug the Roku from the one HDMI connection on my TV, and replace it with the HDMI connection from my set-top box. If I got an HDMI splitter, would there be a way to switch back and forth without unplugging things?
FYI, my TV is a Sony Model KDL-32S2010. Any suggestions would be gratefully accepted!

Looks like your TV only has 1 HDMI port.
A splitter won't work. Would need to get an HDMI switch.
Or just get component cables (will need 4) to run from FIOS box to Component ports (3 video and 2 audio) on the back of your TV.
Then just use the TV menu to switch back and forth.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How do i switch back and forth between vertical and horizontal tab bar?

my lovely vertical left side tab bar switched suddenly when i clicked something accidentally. i'd like to know how to get it back. i got it back months ago when i also clicked, accidentally, but the "get back" was a surprise, too, since i didn't realize what i'd clicked.

Hold shift while dragging the tab bar back to where you want it.

HP PhotoSmart 6525 Switching Back-and-Forth between Wireless and USB

Hi,
I setup my HP PhotoSmart 6525 using the "Wireless with a router" setup instructions (i.e. not Wireless Direct). I am able to print from my laptop through the wireless network. I would also like to be able to print from my laptop using the USB connection at times when my laptop is physically sitting next to the printer. At times when it is not, I want to continue to be able to print wirelessly.
Is it possible to setup the print drivers on the laptop so that I can easily switch back-and-forth between USB printing and wireless network printing? I suspect that it may not be possible because the user guide has a section describing how to "Change from a USB connection to a wireless network" that has you click on a menu item called "Convert a USB connected printer to wireless". There are no instructions for how to convert back to USB. Moreover, the use of the word "convert" does not make it sound like you can maintain both print methods simultaneously on a single computer.
Does anyone know whether it can be done, and if so how?
Thanks in advance,
Paul2
This question was solved.
View Solution.

Hey Paul2,
I see you have the HP Photosmart 6525 installed for Wireless printing capacity and would also like to add a USB driver so that it is available for use when near the printer. Please follow the steps below to add a copy of the printer for USB printing. The below steps are for Windows 7 and below based computers. If you have Windows 8, then the steps will be slightly different so let me know. Please let me know if you have a Mac, because I can provide those steps at that time.
Press the Start menu of the computer
Select All Programs
Open the HP Folder
Open the folder for the HP Photosmart 6520 series
Select "Printer Setup and Software"
Select the option to Add a new printer
Select the USB option
Plug the USB cable in when the software requests it and proceed through the install process
This will leave the Wireless driver support in place and add a second printer under the Devices and Printers window for USB printing. The USB printer may contain Copy 1 in the name as a differentiation, however the other one should also state Network in the printer name to indicate it is the wireless option.
I hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Can I make a second libary on a second hard drive and how do I switch back and forth

I woud like to creat a second libary for itunes on a second hard drive. I am using the latest itunes and lion on my imac and how do I switch back and forth.

Yes. You can.
Start iTunes with the Option depressed and that will allow you to select the library.
Allan

How can I switch back and forth from Classic to Tiger

How can I switch back and forth from OS9.2.2 to Tiger without restarting? I want Classic as my startup system.

I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
I happen to think it's a pain to click twice on files when I'm used to clicking just once.
But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

How do I text back and forth between iPads with only wifi capabilities

How do I text back and forth between iPads with only wifi capabilities

Using FaceTime http://support.apple.com/kb/ht4319http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htmhttp://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.htmlhttp://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetimehttp://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.htmlhttp://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.htmlhttp://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-textinghttp://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/http://www.apple.com/support/systemstatus/
 Cheers, Tom

HELP! How can I switch back and forth from LT to FCE to sync sound?

I'm using LT 1.2.1 and FCE 3.0. I haven't used it for 2 or 3 years, but people in this forum have been amazing at helping me get an old project working again.
Here's my latest question. I swore back then there was a way to move back and forth between LT and FCP so I wouldn't have to render my LT files each time I wanted to drop it into FCP.
Here's what I'm doing:
I've created an entire "movie" in LT that now needs to be fine-tuned to be sync'd up with a professional voiceover, which is why I'm using FCP. The only way I can figure out how to make sure the LT file is going to be sync'd with the audio is to render the movie in LT, import it into FCE, see if the audio works with it, if not, I go back to LT, move things around, then re-render, import into FCE, and hope it all sync's.
I think there was an easier way to go back and forth between the two.
Along the same lines, is there a way to get the audio from FCE (or some sort of a representation) into LT? The LT file must be adapted to the audio, and if I could "see" the audio in LT, it would be infinitely easier.
Thanks!
Bob

LiveType does not support any kind of audio, Bob.
Go through your movie in the FC Timeline and set markers at the relevant cue points by pressing M.
Pressing M a second time whilst sitting on the marker, will open a dialog where you can type a suitable description in the name field. Keep the description short -it might help to take notes too.
Export a copy of the movie (including markers) and bring it into LiveType with File > Place background Movie. The markers will show up at the top of the LT timeline, with their descriptions.
Delete the background from LiveType when you have everything lined up. Save your LT project file and import it into FCE. You can use the project file exactly like a video clip.
If you need to go back to LiveType for changes, right click the LT file in FCE's Timeline. Choose "Open in Editor". This will open the project in LT. Make changes, save the file and it will update in FCE.
Message was edited by: Nick Holmes

Switching back and forth between 2 JFrames, rendering the other non-visable

This seems to be my last problem with this assignment thankfully, everything else is completed. As per topic description, My assignment is to create a calculator like the windows XP calculator. It must have a 'standard view' on start up and the option to switch to a scientific calculator and switch back and forth as needed.
As you most likely are aware the scientific calculator is approximately 1.3x the size of the standard calculator. I did look into CardLayout and TabLayout but from what I can gather these can't change sizes. I found this post: [http://forums.sun.com/thread.jspa?threadID=623561] Which is the same methods I had already tried. None of them worked.
Being this is my first experience with swing, I naturally followed my books design which was to extend JFrame and implement other classes. I feel this may be the wrong course of action now.
public class Calculator extends JFrame implements ActionListener,
            KeyListener, WindowListener
private JMenuBar menuBar;
private JMenu mEdit, mView, mHelp;
private JMenuItem copyItem, pasteItem, helpItem, aboutItem;
public Calculator()
    ... add(menu);
public JMenuBar createMenu()
    ButtonGroup group = new ButtonGroup();
    rbStandard = new JRadioButtonMenuItem("Standard");
    rbStandard.setSelected(true);
    group.add(rbStandard);
    mView.add(rbStandard);
    rbScientific = new JRadioButtonMenuItem("Scientific");
    rbScientific.addActionListener(this);
    group.add(rbScientific);
    mView.add(rbScientific);
    menuBar.add(mView);
    return menuBar;
@Override
public void actionPerformed(ActionEvent e)
    if (e.getActionCommand().equals("Standard"))
      if (! isStandard)
        if (this.isDisplayable())
          this.requestFocus();
          this.setVisible(true);
          rbStandard.setSelected(true);
          sc.setVisible(false);
          isStandard = true;
        else
          JOptionPane.showMessageDialog(null,
                    "Something is wrong this WILL NOT SHOW !!!\n",
                    "It's STUFFED!\n", JOptionPane.INFORMATION_MESSAGE);
    else if (e.getActionCommand().equals("Scientific"))
      if (isStandard)
        sc.setVisible(true);
        rbScientific.setSelected(true);
        this.setVisible(false);
        isStandard = false;
private class Scientific extends JFrame
    public Scientific()
      add(menuBar);
}Ok that is a very basic overview of what the class looks like, the Standard calc hides itself and goes into Scientific mode very well, however when trying to switch back to Standard nothing happens, as you can see from that Action method I have tried numerous things, including dispose(). I need the standard view to become the scientific view and change it's size. I have read a lot of the swing tutorials and I can not think how to do this. Keep in mind that when Standard calc switches to scientific it does not open a new window, the window simply morphs. (this happens at the same orientation to desktop as well).
2 questions:
1. Does anyone know how I can switch back to standard calc?
2. Should I redesign my project (which is currently sitting at 1200 lines and a single class(with inner classes)) and how?
What is a good way to design a swing application such as this? (or is having the class extend JFrame perfectly normal?)
Edited by: Gcampton on Sep 19, 2010 7:47 AM
Additionally, I forgot to mention, I use the menu bar already defined in standard calculator(outer class) inside my scientific(inner class), all the options within scientific mode work exactly as they do in standard. Except of course for switching back to standard. Also the boolean variable isStandard, is not the problem as I have tested without it. the "About Calculator" "Help Topics" "copy" "paste" menu buttons all work and perform the actions as implemented in the Standard Calculator actionPerformed(ActionEvent e), The scientific actionPerformed() method IS BLANK!!!
I was somewhat surprised at this, yet thankful as well. I didn't want to have so much repeat code in the inner class.

I shouldn't have been so quick to think I won't run into any more problems...
I've copied code straight from java tutorials [http://download.oracle.com/javase/tutorial/uiswing/components/editorpane.html]
            JEditorPane editorPane = new JEditorPane();
            editorPane.setEditable(false);
            java.net.URL helpURL = About.class.getResource("Doc2.html");
            if (helpURL != null)
                try
                    editorPane.setPage(helpURL);
                catch (IOException e)
                    System.err.println(
                            "Attempted to read a bad URL: " + helpURL);
            else
                System.err.println(
                        "Couldn't find file: About.html");
            //Put the editor pane in a scroll pane.
            JScrollPane editorScrollPane = new JScrollPane(editorPane);
            editorScrollPane.setVerticalScrollBarPolicy(
                            JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
            editorScrollPane.setPreferredSize(new Dimension(250, 145));
            editorScrollPane.setMinimumSize(new Dimension(10, 10));
            return editorScrollPane;I have the html document in root eclipse folder, in bin and src. yet it does not display. I also have icons in my root folder and they display fine:
this.setIconImage(new ImageIcon("about.png").getImage());Is this way depreciated? or is there somewhere else I should have the document?

Is there an easy way to switch back and forth between apps on an iPhone 4?

Is there an easier way to flip back and forth between apps without going through the Home button?

By "going through the Home button" do you mean double tapping the Home button to bring up the recently used apps tray?

How do I go back and forth between pages?

It is very simple feature, but I can't seem to figure out where the arrows are to go back and forth between web pages.

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Switching back and forth between keys on vocal track

I followed the instructions in the garage band tutorial for changing key (pitch?) of a vocal track for part of the project. Doesn't seem to work the way they suggest - calling up master track, adding a point on the automation line where I want change to begin and raising automation line on other side to raise pitch. No change seems apparent.
This vocal track is actually a rap that involves a person talking to a bug. I recorded the rap in key of D, want to raise pitch of the part that has the bug 'talking' to give it cartoony effect. I tested it on whole track by changing key normal way and raising key from 'D' to 'G' seemed to have best 'feel' for what I want. Can I switch keys back and forth in Garage Band and if so, how?
I also have Soundtrack installed with my Final Cut Pro, but would like to stick with Garage Band for this project if possible.
Judy

if you read the docs, your own recordings are not affected by the master pitch.
for your project it probably makes more sense to use the Vocal Transformer effect anyway (the alternate choice would be to use the Region Pitch control in the Track Editor)

How do I switch back and forth from Mac to Vista?

I am on Mac OS right now and cant figure out how to switch to Vista, also when im in Vista how do I switch back to Mac?
thanks

Restart the computer with the Option key held down, select the desired OS, and press Enter, or use the Startup Disk pane of System Preferences in Mac OS X and the Startup Disk control panel in Windows to change it. If you're using Boot Camp, you need to restart the computer to change.
(42617)

IPod Touch screen switches back and forth between lock screen and start-up screen.

iPod Touch 4th Generation
My iPod Touch screen has been showing the Apple logo with the loading wheel then it will switch to the lock screen. It keeps going back and forth. My iTunes and iPhoto programs recognize my iPod when I plug it in, but it's the iPod itself that doesn't seem to be working. I've already tried resetting it using the Power and Home button, and restoring it using iTunes. I can't turn the power off unless I reset it. It's still continuing to charge on its own but it won't let me unlock the screen.
I haven't dropped it so I don't know why it's like this. I've just had this replaced literally a month ago, so I'm not sure what's wrong with it.
Anyone experiencing this problem or know what to do?

Have you tried placing the iPod in recovery mode and then restoring it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Can I switch back and forth between DSL ethernet modem and AirPort ?

I use Earthlink DSL connected direct to my iMac by ethernet cable from my modem and the service is very good . . . ever since I installed Leopard I noticed up in the top menu bar that AirPort is ON and usually shows 4 or 5 names listed and only 2 or 3 have the Lock icon . . . I have to assume AirPort is detecting signals from the apartments above and next to me . . . I do not need a wireless connection but I am curious to see if my iMac will actually join one of those networks so how do I temporarily try that and then go back to my regular wired DSL service ? . . . also, I may start renting out a room in my place and the girl will undoubtedly have either a Windows or hopefully a Mac laptop and will need wireless so I would appreciate advice on the best equipment to buy that both Windows and Mac laptops can connect to wirelessly . . . thanks in advance for any advice

Yes you can. Just unplug your DSL modem and then go to your airport menu and try to connect to one of the networks taht's available there. To switch back, reconnect your DSL modem and connect as you usually do.
Any wireless "802.11x" router (where x is "b","g", or "n") will work for both Macs and PCs. Practically all routers these days are compatible with every platform out there.

How do I switch back and forth between phones

Similar Messages

Maybe you are looking for