How do I switch from linksys router to my time capsul

how do i switch from using a lynksy router to the time capsule. I use time warner a my service provider.  I swtich them out and did the set up works fine for net work but I can not connect to the internet

Whenever you switch routers you must turn off the cable router for a period to allow it to reset the MAC address of the first device to connect. This can be 1min or 15min or longer.. so try shorter period first.. remember the first device that connects to the cable modem captures the IP.
With the whole network off, wait a 1min (or longer) time.
Power on the cable router.. wait 2min for the cable modem to stabilise and connect.
Power on the TC, plugged in to modem.. wait 2min..
Power on the clients.
If it fails to pick up public IP redo with a longer time.
But this only applies for a cable modem.. if is a modem router combined tell us and we can give a different setup.. ie bridged.

Similar Messages

  • How to switch from Airport Extreme to Airport Time Capsule ?

    Switching from Air Port Extreme to the Airport Time Capsule.
    Software for the older AP Extreme is up to date.   Airport Utility 5.6.1
    When I disconnect the Extreme and re-connect the Timecapsule I get the follwoing software update message:
    "This version of AirPort Utility (meaning 5.6.1)  doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility."
    However, I am no longer connected to the Internet and therefore cannot download the new Airport Software.
    Stumped ?
    Any thoughts ?
    Thank-you,
    John L.

    If you are switching to a new Time Capsule, a review of the System Requirements might first be in order:

  • How if i have 5 different router and 1 Time Capsule in my big house? and 3 device want to use it at same time ?

    I have big house with 5 routers in every corner. The question is can it work ? like i have brother laser print, it cannot work properly, why i said that ? because i cannot print from other router. How about this Time Capsule ? how if my brother, my sister and me want to connect to Time Capsule at the same time using different router (every router of course connected with 1 Lan wired and i connected Time Capsule with one of it). So please help the answer please or any experience people with this issue ?

    The routers are must be bridged .. all except one.. the one router to rule them all and in the darkness bind them.
    All the other routers should be bridge or in what we call wan bypass. That means you plug into the LAN port.. bypassing the WAN routing facility.. setting the DHCP to off and setting a fixed IP on all router.
    So .. main router 192.168.1.1
    All other routers take fixed ip. 192.168.1.2 etc.
    They all have dhcp turned off.
    So they are all on the same network.. they all have different names and different IPs.. but the one router has dhcp on, and all IP in the network are controlled from that single router.
    The TC offers bridge mode.. which does the same thing as wan bypass.

  • How do i transfer files from my external HD to time capsule?

    Hi Everyone,
    I've been reading thru the discussions and yet to find a clear answer on how to transfer files from my external HD to time capsule. I am fairly new to Mac computers, pc user for years, but just bought a new MacBook Pro and the 500g time capsule.
    I plan on using the Time Capsule as a back-up and external harddrive to store all of my music so not to overload my laptop.
    Also, i have a pc formatted ipod, which i will have to re-format for my MacBook so I don't mind creating a new library in itunes but is it difficult to point the library to the music file on the Time Capsule? And will it work?
    Thanks a bunch for any info!

    nnigel, Welcome to the discussion area!
    I've been reading thru the discussions and yet to find a clear answer on how to transfer files from my external HD to time capsule.
    If it is directly connected to your Mac via USB or FireWire, Time Machine will include it in the backup.
    ...but is it difficult to point the library to the music file on the Time Capsule?
    iTunes for Windows: Moving your iTunes Music folder

  • How does a switch learn its route

    Hi
    I have a cisco switch and somehow it finds the best route through different routers, I tested this with traceroute from the switch. How does the switch learn these routes?
    Thanks
    Dan

    Hi Rick
    Thanks for the info. My switch is a 3500 layer 2 switch. Here's the config for my switch:
    Current configuration:
    ! Last configuration change at 16:04:28 GMT Wed Mar 15 2006
    ! NVRAM config last updated at 09:49:35 GMT Wed Apr 27 2005
    version 12.0
    no service pad
    service timestamps debug uptime
    service timestamps log uptime
    service password-encryption
    hostname switch1
    enable secret 5 ttttttttttt
    clock timezone GMT 1
    ip subnet-zero
    ip name-server 10.11.10.2
    ip name-server 10.11.10.1
    cluster enable l3 0
    cluster member 1 mac-address 0007.ebc9.9380
    cluster member 2 mac-address 0007.ebc9.94c0
    cluster member 3 mac-address 0007.853f.6d00
    interface FastEthernet0/1
    switchport access vlan 102
    interface FastEthernet0/2
    duplex full
    speed 100
    port monitor FastEthernet0/8
    switchport access vlan 110
    interface FastEthernet0/3
    switchport access vlan 102
    interface FastEthernet0/4
    switchport access vlan 102
    interface FastEthernet0/5
    port monitor FastEthernet0/19
    port monitor FastEthernet0/22
    switchport access vlan 100
    interface FastEthernet0/6
    switchport access vlan 101
    interface FastEthernet0/7
    duplex full
    speed 100
    switchport access vlan 102
    interface FastEthernet0/8
    duplex full
    speed 100
    switchport access vlan 110
    interface FastEthernet0/9
    duplex full
    speed 100
    switchport access vlan 102
    interface FastEthernet0/10
    duplex full
    speed 100
    switchport access vlan 102
    interface FastEthernet0/11
    duplex full
    speed 100
    switchport access vlan 102
    interface FastEthernet0/12
    switchport access vlan 101
    interface FastEthernet0/13
    switchport access vlan 102
    interface FastEthernet0/14
    duplex full
    speed 100
    port monitor FastEthernet0/23
    switchport access vlan 102
    interface FastEthernet0/15
    duplex full
    speed 100
    switchport access vlan 102
    interface FastEthernet0/16
    duplex full
    speed 100
    switchport access vlan 108
    interface FastEthernet0/17
    duplex full
    speed 100
    switchport access vlan 108
    interface FastEthernet0/18
    duplex full
    speed 100
    switchport access vlan 102
    interface FastEthernet0/19
    duplex full
    speed 100
    switchport access vlan 100
    interface FastEthernet0/20
    duplex full
    speed 100
    switchport access vlan 108
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 108
    switchport mode trunk
    interface FastEthernet0/21
    duplex full
    speed 100
    port monitor FastEthernet0/7
    switchport access vlan 102
    interface FastEthernet0/22
    switchport access vlan 100
    interface FastEthernet0/23
    duplex full
    speed 100
    switchport access vlan 102
    no cdp enable
    interface FastEthernet0/24
    switchport access vlan 102
    interface GigabitEthernet0/1
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 102
    switchport mode trunk
    interface GigabitEthernet0/2
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 102
    switchport mode trunk
    interface VLAN1
    no ip address
    no ip directed-broadcast
    ip nat outside
    shutdown
    interface VLAN102
    ip address 10.11.8.21 255.255.248.0
    no ip directed-broadcast
    ip nat outside
    ip nat inside source list 199 interface VLAN102 overload
    logging facility local6
    logging 10.11.9.21
    logging 10.24.21.1
    access-list 199 dynamic Cluster-NAT permit ip any any
    banner motd ^C
    Switch 1
    ^C
    line con 0
    password 7 xxxxxxxx
    transport input none
    stopbits 1
    line vty 0 4
    exec-timeout 35000 0
    password 7 xxxxxxxx
    login
    line vty 5 15
    password 7 xxxxxxxx
    login
    ntp clock-period 11259714
    ntp server 10.11.9.21
    end
    I haven't got a default gateway, any idea how its finding its route?
    Thanks again
    Dan

  • How can I switch from auto_login wallet to password-protected encryption wallet in 12c  ?

    How can I switch from auto_login wallet to password-protected encryption wallet in 12c
    --Now the autologin wallet is in effect
    SQL> select * from v$encryption_wallet
      2  ;
    WRL_TYPE
    WRL_PARAMETER
    STATUS       WALLET_TYPE    WALLET_OR FULLY_BAC
        CON_ID
    FILE
    /acfs3/wallet
    OPEN       AUTOLOGIN    SINGLE    NO
      0
    --I need to export the keys and it informs me to use password-based keystore
    SQL> ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234";
    ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234"
    ERROR at line 1:
    ORA-28417: password-based keystore is not open
    --So I try to close the autologin keystore and open the password-based keystore, but the autologin keystore cannot be closed
    SQL>  administer key management set keystore close;
    administer key management set keystore close
    ERROR at line 1:
    ORA-28365: wallet is not open
    SQL> administer key management set keystore open identified by "tde_1234";
    administer key management set keystore open identified by "tde_1234"
    ERROR at line 1:
    ORA-28354: Encryption wallet, auto login wallet, or HSM is already open
    So My question is
    How to switch from auto_login keystore to password-protected keystore ?

    Remove the cwallet.sso file and check the wallet status in v$encryption_wallet.
    If it is not opened, try to open it with administer key statement.
    Check the status again.

  • How do you switch from one iTunes account to another on your apple tv?

    How do you switch from one iTunes account to another on your apple tv?

    Welcome to the Apple community.
    I assume you do mean a different account and not simply a different iTunes library. Unfortunately, in order to switch accounts, you would need to log out and log in to the second account.

  • HT201320 How can I switch from one email user to another?

    How can I switch from one email account to another?

    You have to select between the two accounts in the mail app.
    Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
    Is that what you want to know? There is no way to simply "toggle" between the two accounts.

  • How to read data from a router by using labview

    I am a  beginner labview. How to read data from a router by using labview ? 

    What kind of data are you trying to read?
    Does the router behave like a webserver that you log into?  If so, search the forums for threads discussing HTML.

  • I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

    I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

    I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
    Your call of course but IMO a waste of money. Please read this first:
    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
    More useful information can also be found here:
    http://www.reedcorner.net/mmg/

  • HT4623 How do I switch from U.S store to Philippine store in my iPhone 4S.

    How can I switch from U.S store to Philippine store? It's because everytime I attemp application update I get message that says: " Your account is not valid for use in U.S store. You must switch to Philippine store before purchase." Help please.

    Read here:
    http://support.apple.com/kb/HT1311

  • HT4211 How do you switch from multitasking mode back to normal display mode?

    How do you switch from multitasking mode back to normal display mode?

    You mean switch from showing the recently used apps bar or dock back to regular home screen display mode?
    If so, select the Home button.

  • How do I switch from Windows to mac?

    How do I switch from Windows to mac on a macmini?

    Hi,
    I assume you are talking about a BootCamp Windows, right ?
    If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
    There you can choose which Operating System to boot into.
    Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
    Regards
    Stefan

  • How do i switch from automatic to manual download of songs to my iPad from my iTunes library

    how do i switch from automatic to manual download of my songs to my ipad in my itunes library

    You can still manually add songs to the iPad even if the option is not set. Just drag them to iPad same way as when the option is set.
    Select the iPad, click the Summary tab and tick Manually manage music and videos.

  • I am unable to update my apps now because I receive a message that I am not connected to the Canadian store.   How do I switch from the US store to the Canadian store?

    RI am unable to update my apps now because I receive a message that I am not connected to the Canadian store.   How do I switch from the US store to the Canadian store?

    Click here and follow the instructions to change the iTunes Store country.
    (85848)

Maybe you are looking for

  • Running Sourcing Page from Jdeveloper

    Hi, I am trying to run the PonBuyHomePG from jdeveloper. Although the page is loaded without any problems, when I click on a Draft Negotiation on top right corner, I get the following error: Exception Details. oracle.apps.fnd.framework.OAException: j

  • TS2755 How do I get the messages off my App Store because tried to sent a message of the game I tried to download

    When I was on App Store I found another game I wanted and then had press it and sent it to iTunes Store for the person can try to help me and I sent it but the message thing was still right there I press cancel so it can get off the screen but it did

  • Error in File to IDOC Scenario

    Hi, I have File to IDOC scenario. I am getting error in sender file channel. "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfi

  • Could not complete the camera raw command because of disk error

    Hi, First off, I am using a Mac (OS X ver. 10.9.2) and Adobe Creative Cloud Photoshop (2014). I just downloaded the preset pack off VSCO for Adobe Camera RAW and I am having trouble getting it to work. When I try to launch the "Camera Raw Filter", I

  • Built-in Input Static

    I am trying to record my guitar through the built-in input on my Macbook Pro. I set the sound preferences of my Mac to read from the line-in. Everything appears to work fine. When I play a note on my guitar, the input level reacts accordingly. Nothin