How do I switch radio channels?

It was recommended that I switch radio channels on my router to fix the sluggish time for connecting to the browser. I was told I'm onChannel 6 andthat this might be over-crowded. Is this something a tech neophite can accomplish? Thanks , Margrette

Computer:
https://discussions.apple.com/thread/3900962
Mobile app:
http://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
Note, in the USA the only channels that do not overlap are channels 1, 6, and 11. All the others overlap to some extent, so if you change to channel 9 you will see interference from both users of 6 and 11 (and 7 and 8 and 10). Yes, I know it doesn't leave much wiggle room. My wi-fi can see 30+ routers in my area, all trying to use 3 channels.

Similar Messages

How can I insert a code to switch between channels?

I’ve got a HP4263A LCR meter which is being used with an ER-18 device to get multiple channel data acquisition, when I go to getting started to trigger the device, but this VI do not have an icon to change the channel how can I insert a code to switch between channels?

I am just trying to use the drivers developed by NI for this device, but I don't know how to work on them to obtain data from three points, or three channels which I am using from an ER-16 device. So all what I have is the driver VI for the HP4263A.the only VI I can use is getting started, because whe I try to run any other one, this message appears:
Error -1073807346 occurred at VISA Write in HP4263A Self-Test.vi.
Possible reasons:
VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
your help would be very helpful
thanks

From a new ipad user: if I'm listening to live radio, how do I switch it off to move to another site without switching off the ipad?

From a new iPad user: if I'm listening to live radio, how do I switch it off to move to another site without switching off the iPad?

If you're listening to radio from the app, you need to go to that App (press Home button twice for multitasing menu and tap on its icon), and stop it there. If there is no such feature - you can "kill" the app, open multitasking menu again, hold one of the icons for couple of seconds, and click "X" symbol next to the radio app.
If the radio streams in Safari (web browser), you can simply stop it by closing the tab - tap little "X" next to the tab where the radio is playing.
Hope this helps

How to Mark Radio Channels as Favorite in Apple TV 3rg Generation?

I dont see an option to mark my radio channels as Favourite on my 3rd Gen Apple TV. Please provide me the steps to perform this step. Thanks!

Not sure but try holding the select button over a radio station in the menu and see if it asks to add to favourites.

How do i change the channel to my cable modem

How do I change the channel for my cable modem? My broadband speed slows down during peak hours, and I was advised to change the channel from 11 to 6 for example, but that I would have to do it through my airport extreme.
Thank you.
Cable modem is a Motorola SB5101U
Airport Extreme 802.11N (5th Generation)
Mac OS 10.6.8

You can change the radio channel on your AirPort Extreme using the AirPort Utility, as follows:
Run the AirPort Utility.
Select the AirPort Extreme, and then, select Edit.
Select the Wireless tab.
Select Wireless Options.
By default, the channels for both the 2.4 & 5 GHz radios are set to "Automatic." You would first change this to "Manual," and then, select the desired channel.

Delete Radio channels in iTunes?

I have a huge number of Radio channels that Apple iTunes (v 10.6.1) comes with by default (as you know if you've ever looked at the Radio listings).
How can I delete most of them so I don't have to scroll through them?
If I have to do it via Terminal or going in to the System folder it's okay.
Thanks for any info.
Ron

Andrea Perego wrote:
I actually feel disturbed at being presented such ones as heavy metal or hip hop/rap.
You can create a playlist and drag only the stations you want to this playlist.
Then go to iTunes prefs > General and uncheck Radio..

How can I delete one channel of stereo audio?

I am using FCPX and I need to delete one of the stereo channels. All I am seeing on the screen is one waveform and one channel. How do I see both channels?
Thanks

Change it to dual mono and use expand audio components. You can adjust the channels separately or switch either off in the inspector.

Does the RCA OUTPUT ON THE cdx-gt56ui run both sub and preout? if so how do I switch it to PRE-OUT

Does the RCA OUTPUT on the CDX-GT56UI Car Stereo have both Sub and PRE-OUT? if so how do I switch to PRE-OUT?

Hello Richard,
The unit has 2-channel Preamp Outputs on the rear of the receiver, used for connecting external amps. This unit doesn't have Sub Preamp Outputs.
The rear preamp outputs can be set in the menu to output a full range signal to the rear channels, or a filtered signal to a subwoofer. When set to subwoofer, the output typically has a selectable low-pass filter and is non-fading. You can change the rear preamp outputs by selecting REAR/SUB option under Setup menu of the unit.
If my post answers your question, please mark it as "Accepted Solution".
Thank you for your post.

How to best use Multi-Channel Plug-in: Miroslav Philharmonik

Hello everyone,
I recently purchased the Miroslav Philharmonik sound library and am learning to use it. You can assign different instruments and sounds in up to 16 different channels within the plug-in. I've quickly learned that this is a very important feature to use in order to have, for example, all the different violin articulations (e.g. legato, staccato, pizzicato, detache, etc.) at your disposal at once and within one instance of the plug-in. The only problem is, I'm not really sure how to manage changing MIDI channels within the arrange window.
Let's say I have the 4 previously mentioned violin sounds loaded into Channels 1-4 in the Miroslav plug-in, which I have inserted into the Channel Strip for Inst 1. Let's say I play four bars of legato, then want to switch to staccato for four bars. How do I do this? I know I can switch the MIDI Channel from 1 to 2 in the channel strip info window, but is this automatable for play-back? I have just a basic M-Audio MIDI keyboard with pitch bend, mod wheel, octave +/-, advanced functions button, and volume. I've never worked with a multi-channel plugin before and would love any and all suggestions on how best to use this feature! Thanks!
David

Doesn't the Miroslav Plug In support keyswitches? Using these there would be no need to setup a Midi channel for each articulation as all articulations would reside in the same patch on the same Midi channel and you would just toggle between them by using pitcches which are not within the range of the corresponding Instrument.

(Agilent E3631A) Question about switching between channels

Hi!
I have got a problem with my Agilent E3631A. I want to control the machine into switching between +10V and -10V at given intervals of time. This should of course be achieved by switching between channel 2 and 3, but here the big problem arises: When the (+) and (-) are connected through the same wire, a current starts to pass from (-) to (+). I want to be able to completely close the channel that is not used a the time, thus making sure that the machine isn't short-circuiting the set up.
Does anyone know how to "seal off" a channel?

Hi Simon,
as far as I know the 3 outputs of the power supply are independent.
Have you tried to disable channel 3 through an SCPI command (or a driver VI) while enabling channel 2 and vice versa as you need it?
I thought if disabling an output this one is then completely cut off, maybe it helps.
Regards,
gedi
Regards,
gedi

How to deselect the Radio button from htmlb.table.TableView

Hi Experts,
Could you please help me, how to seselect the Radio button from htmlb.table.TableView?
<hbj:tableView
                                   id="tbvCustomer"
                                   model="mcBean.csModel"
                                   design="ALTERNATING"
                                   headerVisible="TRUE"
                                   footerVisible="TRUE"
                                   navigationMode="BYPAGE"
                                   selectionMode="SINGLESELECT"
                                   fillUpEmptyRows="FALSE"
                                   headerText="Searchresults"
                                   visibleRowCount="10"
                                   onNavigate="CustomerSearchNavigate"
                                   visibleFirstRow="<%=mcBean.getCsVisibleFirstRow() %>">
Problem: After searching and selecting the Customer in the table, then again we are searching for another customer. After that the searched customer is displaying in the Table. By default the table Radio button is selected. Because for first Customer we have selected the Radio button. How we can deselect the FRadio button while searching for another Customer.
Thanks In Advance.
Regards,
Vijay.

I think it is <2095>.
In SmartForms, go to your text window.
Use the icon on the top left of the text window to switch to the old editor.
INSERT -> CHARACTERS -> SAP ICONS.
Do a FIND on "radio". It's called ICON_WD_RADIO_BUTTON_EMPTY.

How can i switch my att wifi with time capsule

how can i switch my att wifi with time capsule

Sorry I have no idea what you mean.. switch off, switch on, swap over.
Bridge the TC and use same ssid (wireless name), security but different channels..
Or just turn it off.
Please write a question that is a sentence and has sense.

Add Internet Radio Channel to iTunes.

How can I add internet radio channel to iTunes?

Take a look here:
"How to Listen to Internet Radio Stations": _http://www.macinstruct.com/node/101_
And if you are having trouble with a url- look at the html source. This gives a rough example of an internet radio site that you can listen to in Safari. So, How do you get the url into iTunes?
_http://discussions.apple.com/thread.jspa?threadID=1305740&tstart=0_
Bonne chance!
-Geoff

HT201084 My family shares one Apple ID on multiple devices. How do I switch everyone over to their own Apple ID without having to erase their iphones and ipads?

My family currently shares one Apple ID on multiple devices and has for quite awhile. How do I switch everyone over to their own Apple ID and the Family Sharing without having to erase their iphones and ipads?

Thank you again for your time, GB.
I set up individual Apple ID's for my children so that they could have their own Apple ID on their individual iPad minis (gifts from grandparents last year). When I go to iCloud under Settings, I see my Apple ID listed at the top, then my children's listed under Family Sharing. So the device is still using my Apple ID for iCloud, iTunes, etc., correct?
To "assign" their own Apple ID to their own iPad mini, I would need to "Sign Out" from my Apple ID. When I attempt to do so, I receive a warning that all of the Documents and Data will be lost/deleted.
So, instead of doing this, I figured out that I could do what you suggested. Signing in using a child's Apple ID will allow her/him to use Game Center, FaceTime, and Messages just fine. However, using their Apple ID for iTunes & App Store proved to be a problem: Purchased Music and Movies appeared in iTunes, but my Purchased Apps did not appear. Some Apps even disappeared, e.g. Proloquo4Text (a $99 app to help my son speak with his iPad).
So I reverted to using my Apple ID for iTunes & App Store, and I get everything that I want, EXCEPT for the iCloud storage for each Apple ID.
So that's when I started wondering how Family Sharing was really benefiting me ~ It was a lot of work (deleting apps to allow space to download iOS 8, etc) without any benefit that I can see. UNLESS I find a means to allow me to sign in each iPad's iCloud account with a different AppleID, then perhaps restore the Documents and Data from a backup? Would that work?
Thanks.

I had a trial version, and tonight I bought it. But buttons led me to the Windows version which I accidentally bought. I have Mac. What do I do? How do I switch it over to a Mac version?

I had a trial version, and tonight I bought it. But buttons led me to the Windows version which I accidentally bought. I have a Mac. What do I do? How do I switch to Mac version?

Hi scarabs55,
Are you working with Acrobat or Photosohp? (You mention both PDF files and photos, so it's not clear.)
Let us know what software you're thinking about upgrading and we can point you in the right direction.
Best,
Sara

How do I switch radio channels?

Similar Messages

Maybe you are looking for