How do I switch the items in my print queue listed under "wireless" over to the "usb" ?

I turned off my wireless service, but i still have items in my print queue under "wireless printer" for my HP 3050A. How do I switch the settings so that it will print using the usb cable (for the same printer)?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

How can i get my items to stay in place and not cross over each other when readjusting the browser s

How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advance

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

How can I uninstall Kaspersky? The item "Kaspersky Anti-Virus.app" can't be moved to the Trash because it's open.' I did not open it in fact. Please advise. Thanks.

How can I uninstall Kaspersky to install Mckeeper ?
The item 'Kaspersky Anti-Virus.app' can't be moved to the Trash because it is opened'. Actually I did not open it.
Please advise, thanks.
Emmanuel

Remove "Kaspersky Security" by following the instructions on this page. If you have a different version of the product, the procedure may be different. The product includes a Safari extension that may not be removed by the uninstaller.
Back up all data before making any changes.

The operation can't be completed because you don't have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section?

How do I create a "place" in iPhoto's Places list? Is this possible the way it's possible to create albums? Also, how do I assign a place to a photo or vice versa?

How do I create a "place" in iPhoto's Places list? Is this possible the way it's possible to create albums? Also, how do I assign a place to a photo or vice versa?

Select a Photo in the iPhoto Window and click on the 'i' button lower right. This uncovers the Info Panel, and you can assign a Place there. Search on the name of the place and then move the pin to where you want it. This is all covered in the Help and in the tutorials.
http://www.apple.com/findouthow/photos/#places
Regards
TD

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

Hi el_giclee,
Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
Michael

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet? I don't need the calendar grid. I just want a list of events on a particular calendar, and their dates. Is that possible?

Not easily. Two possibilities:
1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
2) You could write an Applescript to locate the events and write them into a text file for printing.
The first one will probably give you what you want.

How do I download illustrator CS6? It's not listed under apps anymore

How do I download illustrator CS6? It's not listed under apps anymore

Willlucv you will want to install Illustrator CS6 by choosing the Previous Version option within the Creative Cloud Desktop application. You can find additional details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

HT204135 how to re print job from print queue listing on a mac?

how to re print job from print queue listing on a mac?

Hello there! Welcome to the forums @technolingua ,
I read about how you are looking to print envelopes from Mavericks. I would suggest checking out the links below to help you out!
Create envelopes by using Mail Merge
Print Envelopes (Mac)
How to Print Envelopes on a Mac
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Epson software install problem: The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software." But i have downloaded from Epson and Apple!!!

I am trying to install a printer Epson xp-605 but when i try to add it, Apple says it can't find the software. I have downloaded the software from Apple website and also from the Epson installation disc! The message is: "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."

Try a reset of the printing system. This often resolves the symptom you are experiencing.

How do i turn off TFS adding bulds to Global List? and or to the "Found In" drop down in work items?

We do not use the standard TFS build definitions in our drop downs, and have scripted updating the global list with our standard build numbers. However, we get both the TFS builds and our build numbers in the "Found In" field of work items. How
do I disable TFS automatically adding the "Builds - " list into the "Found In" field Rules? and or updating the Global List?

Hi CRHill,
Thanks for your post.
What’s the version of your TFS Server?
What’s the “not use the standard TFS Build definitions in our drop downs” mean?
You’re using the TFS Build Definition to build your solution but not use the default TFS build process template in it?
If you don’t use TFS build definitions to build your solution, how the TFS builds’ numbers be generated and added in team project Global list?
As far as I know all the completed TFS build numbers will be added in to team project Global list by default, and there’s no a default way to turn off that in TFS Server. Please refer to the workaround in this article:
http://readcommit.blogspot.com/2008/04/found-in-build-team-build-list-make-it.html.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I select a item from a drop down list on a web in Safari On An. IPad 2. The list apears and disapears só QuickClips I cannot TAP anything On The list Quickly enough.

I tried to select an item from a drop down list on a web page in safari and discovered that the list disapeared to quickly for me to make a selection. Has anyone else found this and solved the problem. Many thanks.

Demo wrote:
I tried it on my iPad and I see what you mean. From what I can see when I go to the site on my Mac, it is Flash based and that will not work anyway.
Actually, it is Javascript and uses the 'onmouseover' event.

I have a MBP from late 2009. It works fine in all regards except recently, when an icon is grabbed by the built-in track pad, I can't drop the item and have to shut my computer down to resolve the issue. How do I reinstall the driver for the trackpad?

Ok, I thought the subject line was the extent of what I could type. My trackpad has been working fine for over two years now. But recently if I accidently (or intentionally) drag a picutre that is highlighted on any website, the cursur never lets go of the image and all "clicking" capabilities become useless. It even manages to lock up the rest of the computer, such that trying to restart manually doesn't work. I litterally have to hold the power button till the MBP turns off and reboot. I have looked for a way to unistall and reinstall the driving, but I'm either redirected to a non-Apple website or else I'm directed to the new "Retina" MBP section of the Apple store. I don't have any other mouse that is connected to this computer, so there shouldn't be any weird interference between mutiple mice.
Is there an official applie support section where I can either download the proper driver to simply resinstall the orignal 2009-2010 MBP trackpad driver, or a way for the "Software Update" under the Apple logo in the top file bar to acknowledge this problem an automatically patch it? I'd rather not have to go into an Apple store just to get this quirk (which doesn't happen 100% of the time anyways) figured out. I simply don't want it to occur while I'm in the middle of a larger project and then get stuck being unable to save a document and I have to forcefully restart my entire computer (nuisance aside).
Thank you,
Hamilton

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

How do i switch from copy mode to print mode on my office jet 4500 wireless?

Having trouble switching back to print mode on my printer? I can only switch from copy to fax to scan. How do I switch to print???

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to populate another page item based on cascading select lists?

Oracle 10gXE
APEX 3.2
I've created cascading select lists based on the examples (using Javascript and AJAX) that i've seen on this forum. Thanks for help on that!
Now that I have these LOV's being populated without needing to submit the page, how do I take the value that is presently in each LOV and concatenate them together to populate another page item? I'm trying to build the URL string that will execute an Oracle Report once the user clicks a button.
Previously, when I had multiple Select Lists with a submit, the URL was being put together using an After Submit Computation that would set the value for an item (P26_REPORT_URL) on the page. Notice that a report parameter (i.e. parameter name and Select List value) is only included if the user has provided a value. The page item that holds these values is then referenced by a button for URL redirect. The URL Target for the button currently is: javascript:popupURL('&P26_REPORT_URL.'), but will not work at the moment because P26_REPORT_URL page item is not changing based on what is selected in the LOVs. Since I'm not submitting anything (do I need to?), how do I put together the values needed?
Computation for P26_REPORT_URL:
DECLARE
l_param VARCHAR2(2000);
BEGIN
l_param := '&REPORTS_URL.&report=&P26_RPT_VIEW..rdf&desformat=&P26_DESFORMAT.&destype=cache';
IF REPLACE(:P26_OLO_CODE,'%'||'null%',NULL) IS NOT NULL THEN
l_param := l_param||'&p_olo_code=&P26_OLO_CODE.';
END IF;
IF REPLACE(:P26_BEG_DATE,'%'||'null%',NULL) IS NOT NULL THEN
l_param := l_param||'&p_start_dt=&P26_BEG_DATE.';
END IF;
IF REPLACE(:P26_END_DATE,'%'||'null%',NULL) IS NOT NULL THEN
l_param := l_param||'&p_end_dt=&P26_END_DATE.';
END IF;
IF REPLACE(:P26_ORG_CODE_2,'%'||'null%',NULL) IS NOT NULL THEN
l_param := l_param||'&p_org_code=&P26_ORG_CODE_2.';
END IF;
IF REPLACE(:P26_FLAIR_ORG_2,'%'||'null%',NULL) IS NOT NULL THEN
l_param := l_param||'&p_flair_org_code=&P26_FLAIR_ORG_2.';
END IF;
IF REPLACE(:P26_BUDGET_ENTITY_2,'%'||'null%',NULL) IS NOT NULL THEN
l_param := l_param||'&p_agy_code=&P26_BUDGET_ENTITY_2.';
END IF;
RETURN l_param;
END;

Andy,
This is a great suggestion! After I posted, I started looking at a Javascript solution and figured it's probably what I had to do.
However, now the cascading select list no longer working for some reason after I added the function to concatenate the item values. When I remove the showReport() function the select list works again.
Here is what I have in the HTML Header portion of the page:
<script language="JavaScript" type="text/javascript">
function popupURL (url) {
w = open(url,"winLov","resizable=1,width=800,height=600");
if (w.opener == null)
w.opener = self;
w.focus();
function showReport()
var l_param = '&REPORTS_URL.&report=' + $v('P26_RPT_VIEW') + '.rdf&desformat=' + $v('P26_DESFORMAT') + '&destype=cache';
if ($v('P26_OLO_CODE' != '')
   l_param += '&p_olo_code=' + $v('P26_OLO_CODE');
if ($v('P26_ORG_CODE_3' != '')
   l_param += '&p_org_code=' + $v('P26_ORG_CODE_3');
popupURL(l_param);
function get_AJAX_SELECT_XML(pThis,pSelect){
     var l_Return = null;
     var l_Select = $x(pSelect);
     var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=ORG_SELECT_LIST',0);
     get.add('TEMPORARY_ITEM',pThis.value);
     gReturn = get.get('XML');
     if(gReturn && l_Select){
         var l_Count = gReturn.getElementsByTagName("option").length;
         l_Select.length = 0;
         for(var i=0;i<l_Count;i++){
             var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>

How do I switch the items in my print queue listed under "wireless" over to the "usb" ?

Similar Messages

Maybe you are looking for