How do I switch Timecode on a reel after someone has started using it?

Hello all, I could really use some help on this one...
I captured a digital reel of a feature and forgot to set the timecode to start at the hour. Therefore, instead of cutting with a reel that started at 01:00:00:00, it started at something like 1:38:02:12. I need to revert the timecode on the original clip so it starts at 01:00:00:00, but have already started using the original clip with the faulty timecode. If I were to try to knock the original clip with faulty timecode offline and reconnect to the clip with correct timecode, all of my work would be shifted because it would be reading the incorrect timecode. This is a huge timewaster considering how much work I have already done.
Is there a way to knock everything offline and reconnect successfully to the CORRECT reel with the CORRECT timecode while still keeping the original cuts I made?
Please advise, and thank you in advance.

I work at a production company. We need to have correct timecode for finishing. We got in footage that we are supposed to start every reel at the hour. When you convert the footage through final cut pro to the format we need to work in, the timecode resets to a random number of where it was in the final cut pro sequence when exported.
We need to have the reels timecode start up at the hour of each tape, so reel 1 should be 01:00:00:00 and reel two should be 02:00:00:00 and so on. It is strictly a finishing thing.
My question is, how, when someone has already started working with the clips with the incorrect TC can I change it so everything matches up correctly? If I were to change the Timecode now, everything would relink to the wrong timecode.

Similar Messages

How do I get "reply all" to work after someone has responded?

When I send out a message to multiple recipients and one person responds, hitting "reply all" only gets the address for the last person who has responded, even when I go back to the original message and select "reply all" from there. Any suggestions?

Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, please '''Tag''' this thread as being for Thunderbird in the right-hand column of this page. This question currently is in the Firefox queue for answers.

How can one cancel an iTunes purchase after download has started

How can one cancel an iTunes (movie) purchase after download has started but not completed

The reply from cor-el assumes that the question was about an ordinary download, managed by the "Downloads" panel interface. A Firefox update does its downloading (before installation) with a different interface panel. I do not have a screen-capture of the actual panel in that it's appearance happened a few days ago and our final approach was to suspend the automatic download (note that that had been started in error), and then to do all the manual steps we usually would do for a deliberately, manually-started, update. But the "hanging in mid-air" update forced us to do that update in a way and at a time that we ordinarily would not do it.
I still contend that the Firefox update progress panel (whatever it is labelled) does *'''NOT*''' have any obvious cancellation interface, not even the "x" noted above. (... and if it *only* had an "x", in my opinion that would not be a sufficiently obvious interface as compared to having a "Cancel" button.)
I am replying in this thread on behalf of "shepdog" as I am our local desktop support for the particular Macintosh. Please consider this reply as a mark that the reply from cor-el, while it was a correct answer, was not an answer to the particular question that was asked, i.e., "Not Helpful".

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

Is a version of Mac OS running on this Mac? Reboot and hold down the option key.

How do I switch from headphones back to regular volume if I use my headphones I have trouble with regular communication the phone rings but I cannot hear the speaker

HOw do I switch from headphones back to regular volume.if I use my headphones I cannot get the volume to work for incoming calls the phone rings but I cannot communicate

Do you have a screen protector on? At times of poorly made it will cause problems with the sensor for the screen lighting

How can I have my iTunes account back after apple has disabled it?

My Itunes Account has been disabled for not paying . after that I payed and they took the moeny owed.
but still my account disable.
How can I have my iTunes account back after apple has disabled it?

contact iTunes support team

Someone has been using my account to download apps how do i claim the money back?

someone has been using my account to download apps how do i claim the money back?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If that is true, then you need to promptly secure your account by resetting the Apple ID's password;
Manage your Apple ID -
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Apple considers all sales as final, but has been known to offer a one time refund.
iTunes Support -
http://www.apple.com/support/itunes/

How do I restore a file to iTunes after I deleted it using Keep File?

I wanted to shorten the list of visible files in my laptop's iTunes Music folder without losing the actual music. So I selected Keep File. Now I want to bring some of that music back.
How do I restore a file to iTunes after I deleted it using Keep File?

Assuming the track file is still there, either use the Add To Library command under the File menu in iTunes and select the tracks you wish to add back into the iTunes library, or find the track files on your hard drive and drag them into the iTunes window.
Regards.

HT2534 How do I switch back to my original App Store? I use the South African App Store but somehow it changed to the UK App Store

I used the South African App Store, but somehow it switched to UK now I can't download anything!!!!!! How do I switch back?

Follow this procedure:
1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID.
3. Tap View Apple ID.
4. Enter your password.
5. Go to Country/Region in the popup window to change to the desired store.
See also: http://support.apple.com/kb/HT1311

How do I sync a new iPad that I've already started using, and don't want to lose the data?

I have a new-ish iPad that I have started using without syncing to iTunes.
I now need to sync iBooks, if that is possible, with my iPhone. I gather that the best way to do this is to link the iPad and iPhone up with iTunes.
When I plug the iPad into my iMac, it appears as though it will delete all the existing content on my iPad as it thinks it is a brand new, unused iPad. I don't want this.
How do I connect the iPad to iTunes for the first time, without it erasing what I already have on it?

Sadly, none of this works.
I have backed up using PhoneView and iCloud. When I plug the iPad in, I can't access anything other than a binary option that says 'set up as a new iPad' or restore from a previous back-up. Sadly, none of the iCloud back-ups that I have done from my iPad appear in the list.
Looking at the list provided above, I can only do steps 1-3.
4. Store>Authorize this computer.
- This doesn't work. A pop-up appears saying that I have already authorised 4 devices. It won't let me do anything else with this.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your iTunes library).
- Greyed out - can't do this.
- None of the things below therefore work either.
6. Right click your phone in the left device pane & select "Reset warnings".
7. Right click again and select "Backup".
8. Right click again & select "Restore from Backup", select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your iTunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select "Merge".

HT201272 i just got an iPod 5 and the person that had it before has it link to there apple id and they didn't give it to me and now i can't by pass it i even did a hard factory reset and still nothing how do i get rid of this problem so i can start using

i just got an ipod 5 and the person that had it before has it link to there apple id and didnt give me a password i did a hard reset and nothing happen it still asking me for a password how do i bypass that cause i want to start useing it

Funds cannot be transferred from one Apple ID account to another.
Try here > Rescue email address and how to reset Apple ID security questions
If that doesn't help, contact Apple for assistance with your security questions > Contacting Apple for support and service

How do I switch from Mountain Lion to Snow Leopard? New used computer that I don't have anything on yet but has Mountain Lion installed.

I just puchased a used 2008 MacPro 2.8 ghz 8 core and it has Mountain Lion installed on it. I want to go back to Snow Leopard because it is a better stable OS for using Final Cut Pro 7. I just bought the Snow Leopard Discs to install. I need to erase the hard drive and install Snow Leopard. Any help on how
to do this? Thank you.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

How can I put my iMac to sleep after it has finished downloading or uploading something?

For example: I have some photos and videos that I want to send to a friend. I'm uploading them to a site to do this, and they're quite big files (250 MB).
I'd like to do this at night, but I don't want to let the computer run all the night through, when this maybe only needs a few hours.
I can only guess how long it will take (judging by the time it tells me that it will take, if available), and then I can set the computer to go to sleep after X hours or minutes.
Can I not just simply set it in a way that it goes to sleep automatically after the process is finished? Like, if there's a connection to the internet, that is being used (downloads, uploads), then it shouldn't go to sleep, else it will interrupt the upload, and I can start again.
Also, I have an iMovie update now, which is over a GB of download.
I may be mistaken, but I have the feeling that for some Apple programs, it actually keeps the computer awake until the process is done. But it isn't the case with all programs, only with some.
It's really annoying. Does anyone know a solution? I know that there's this box that you can tick, that says something like to keep the computer from going to sleep if there's a network connection, but in earlier OS this was actually working! Now it's 100% useless.

You can just set your Mac to sleep using the Energy Saver in System Pref. Set it to sleep after say, 2 mins of inactivity then check the Put Hard Disk to Sleep setting too. It won't sleep while you are down/uploading.

How do I lock a PDF form field after it has been completed by a user?

We have a problem with privacy on our downloadable Pdf Forms for customers, they are required to complete personal details within the Pdf Form Fields and then must be processed by our account team.
But we would require customer completed forms to be disabled from any third party or employee tampering with the entered details.
Once the data has been input into the form provided online and saved and sent-on it needs to be read ONLY from then on!
Help please, Chris.

It depends how secure they need to be. You could include a script in the form which sets the fields to be read-only when the form is submitted, but that can easily be bypassed (and may not be respected by third party PDF applications). Search this forum topic for examples, it's been asked many times before.
If you have Acrobat you can flatten a form, turning the fields into regular page content, but that's not possible in Adobe Reader X. While the flattened page can no longer be edited in Reader, it can still be edited in Acrobat via the touchup tools, so for complete security you would need to apply encryption to the flattened PDF (via a certifying signature or DRM).

How to change the IO status to CLOSE after it has been settled through ko8g

hi ,
I have the following scenario : An internal order is assigned to a PO and after setllement of such an order i need to CLOSE the order .
The PO has a GR done (no IR) . Currently Internal Order is in the status : TECO [technically complete] and setlement has ben doneusing Actual Settlemnet Run using KO8G.
Now i need to change the IO status to [ CLOSE ] : it is gving an error in KO02 : Balance is not zero .
How to change the Internal Order status to CLOSE or rather how to make teh balance in that Order toZero?
Is it reqd to process some GR's for teh same PO ?
Thansk
Trina

Hi,
Check the order balance in Ko02
Menu --> Extras --> Order Balance if balance exist it means that the order has not completely settled.
Regards,
Raj

How do I switch Timecode on a reel after someone has started using it?

Similar Messages

Maybe you are looking for