How do I switch to an older version of my library? Itunes asked me to find the library, and I seem to have picked the wrong one. Ive lost over 500 songs!
Itunes told me it couldn't find the library, and asked me to find it. I apparently picked a version from years ago, because over 500 of my songs are missing, and some I deleted a long time ago have reappeared. I see a file labelled "itunes library" from yesterday (the correct one), but I can't find a way to make itunes use it. This screwup is costing me several hundred dollars at the moment!
I assume that this new interface AirPort Utility you are referring to is version 6.0. If that is the case you can download and install version 5.6. Both can co-exist on the same machine and I would recommend that you keep both of them. Then use 5.6 to administer the base stations for your networking requirements.
Similar Messages
-
If i create a new alias in my iCloud account, and forgot the password and I can´t actually have open the account in any of the devices, how can I recover my password?
Welcome to the Apple Community.
iForgot.com -
How do I synch my iPad 2 to my Address Book so that all my contacts are reproduced? I'm having difficulty find the place and directions for the iiTunes Store.
This is selected under the Info tab for your iPad sync preferences with iTunes.
-
How I can switch to an older version of IOS8 ?
the current malfunctioning and I close the applications and the wifi is very slow
You can't downgrade the iOS. Try troubleshooting your problem:
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
I can't open 3 documents because trial upgrade to version 5 of pages happened. I don't want to pay $20 to get upgrade. I don't recall fine print stating money would be needed. How do I open docs in older version? They were created in older version.
Hi MBilyeu,
Thanks for visiting Apple Support Communities.
You can use these steps to open your Pages documents with the previous version:
Permanently change the document’s app
Select the document and choose File > Get Info.
In the Info window, click the triangle next to “Open with” to expand the section.
Choose an app from the pop-up menu, or choose Other to locate a different app.
If you want to use that app to open all documents of the same type as the current document and created by the same app, click Change All.
Temporarily change the document’s app
You can open a document in a different app without changing the app that normally opens it. Use either of these methods:
Control-click the document, choose Open With, and then choose the app you want to use.
Drag the document to the app’s icon in the Dock or in the Finder.
From:
OS X Mountain Lion: Choose an app to open a document
http://support.apple.com/kb/PH11329
Regards,
Jeremy -
How to open older version of iPhoto from an external drive. It won't let me open or upgrade to the latest version?
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
how is the EHD where the library is located formatted?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
When I bought my Mac Air OSX Version 10.9.2 my daughter helped me migrate the contents of my previous macbook. But in the process seems to have duplicated the iTunes library - How do I get rid of one. The start up disk is almost full and plus it doesn't synch properly with my iPhone 4S. Please help!
Hello nicky:
You should run repair disk from your software install DVD before you try anything else. The crash may have damaged some of your directories - and a possible cause of the "missing/not missing" tunes.
Barry -
I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR -
When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!
Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul -
how do i uninstall iphoto? it was preinstalled on my macbook pro when I bought it used and I can only update with the previous owners password.
Do you have the current MacOS X version 10.10.2?
Then you can simply move iPhoto from the Applications folder to the Trash,
sign into the App Store with your own AppleID
reload the "Featured" main page of the AppStore with ⌘R,
then download iPhoto with your own AppleID.
Make a backup of your iPhoto Library, before your launch the new iPhoto the first time,
If your current system is not Yosemite, you can only buy a boxed iLife 11 version of iPhoto to install it independent of the previous owner. -
Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG 64 KB -
My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!
Just to make sure... you have the phone in ringer mode right? Sometimes the switch on the side gets bumped (especially if you don't have a case on the iPhone) and goes into silent. If you see a orange line on the switch - it's on silent.
If the switch is fine (and isn't loose or anything) try restoring the iPhone in iTunes. -
iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.
Hold down the option key while starting iTunes and make an new library. Will it open then? If so, you have a bad library. With the new library import the library.xml version of the file in your iTunes folder. This will make it 90% like before (some metadata are not identical, but I don't know which ones).
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451 -
Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up.
Is there a list of AE/bonjour supported printers?Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.
Maybe you are looking for
-
Macbook Pro Super Drive Loud Whirring Sound during Burn and Verify
Hi there! I am using Toast 7 and when I burn DVD's I have noticed that the Super Drive gets a very loud whirring sound that seems to get louder and softer during the first 2 minutes of burning and then during the first 2 minutes of verifying; then it
-
Low vision disability and optimizing Mac OS X
I need to replace my notebook and I am considering buying a Mac, but I have some concerns about Mac OS X. Specifically, is it possible to make the 3 red, yellow and green bubbles and other icons in the toolbar bigger? The zoom function in "Universal
-
Va32-standard print program, and smartform
Hi experts, i need to find out the standard print program for va32 or va33. how to find out. i have a smartform /SMB40/SDSDA_L,,,,,for this one which print program i can use. is this one correct for for va32, ifany change is there,,,u can suggest me.
-
Latest patch has a bug in search box
I Searched for books in my collection and removed al text from the search box. Since then my collection is showing empty when search box is empty and shows only when I type some thing in the search field. I re. Installed the app but still the same p
-
Hi, My problem is related to temp. control task from file. I have two heaters and LS336 temperature controller unit. I want a kind of temperature profile which should be loaded from the file. This will be very easy for me to control temperature and s