How do I sync between firefoxes on a dual boot - openSUSE 12.3 & Windows 7

I sync-ed both the firefoxes, but they still seem independent. i.e., no syncing has happened.

I forgot to add that I use tab groups a lot. Might that be a problem?

Similar Messages

  • How can I sync between Firefox on mac (33.0.2) and Firefox on windows (33.0.2)?

    The mac version is using the 'pair a device' method whereby a code needs to be generated and entered within the master browser.
    The windows version is requesting I sign into an account.
    The 2 methods are different and so at the moment I cannot sync my new windows browser with the original mac browser.
    Please help, Thanks.

    '''Thanks cor-el your instructions worked.'''

  • Sync between Firefox English on WinXP and Firefox French on MacOS 10.5 (english or french) does not bring bookmarks (bug brings tabs from other computer)

    Sync between Firefox (latest) English on WinXP and Firefox French (same version) on MacOSX 10.5 PPC (iBook G4) (english or french) does not bring bookmarks (bug brings tabs from other computer). Account WORKS, yet sync does not sync anything BUT the "alien tabs". Using Sync to migrate plataforms in this scenario is impossible. Any hints here ? Thank you.

    After experimenting, each sync is scheduled on the each individual device and after all of them have completed, the about:sync-tabs page shows the updated tabs. It is not realtime, it seems to take a few minutes. This being the case, a fresh login did speed this up. If I logged out of the firefox account on my mobile device and logged in, I immediately saw the tabs on the about:sync-tabs page.
    There is no limit to how many can be synced. There is a number of tabs that make it to the queue for the next scheduled sync. The tabs are done by a time interval as far as I noticed in the experiment.
    The history is indeed merged with the history from other devices. It is merged the synced to each of the devices over an interval of time.

  • I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

    I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

    Wayland wrote:
    The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
    Don't have it send email.
    Answer the security questions.

  • How can I sync with Firefox Sync?

    I got a Intex Cloud Fx. How do I sync with Firefox sync feature?

    HI Rajvi,
    Congratulations on your new Intex Cloud Fx with Firefox OS 1.3! Unfortunately accounts was integrated into a later version of Firefox OS . It appeared in test builds of the Flame device in version 2.0. However I do not know the plan for future updates for this device yet.
    Please stay tuned, and if you have any other questions about this device, we are happy to help!

  • How do I sync my Ipod in recovery mode to my computer using Windows(PC)

    How do I sync my Ipod in recovery mode to my computer using Windows(PC)?

    http://support.apple.com/kb/HT1808
    Regards.

  • How do I sync between program files on computers

    I am trying to sync between two spreadsheet programs, i.e. move data from one to the other.

    How is that related to Firefox support?

  • How often iCloud sync between devices takes place?

    Previously on Mobile Me, sync between devices (of contacts, bookmarks, etc...) was automatic and there was an option to trigger a sync manually. The automatic mode was very fast, and updates would occur in a matter of a minute or less.
    With iCloud I can't find an option to intiate a sync. And automatic sync seems to take ages, sometimes hours.
    It can cause problems, for example, I go out to an important meeting and I update the meeting address on my mac's calendar. Then on the way to the meeting I refer to my iPhone to check the details, but 15-30 minutes later they are still not there.
    Does anyone else experience this slowness in updating, and has anyone found a way to force a sync?
    thanks!

    To refresh on Mac iCal: View > Refresh all (see screen shot).
    To refresh on iOS devices I find that to quit and reboot the app usually speeds things up (double tap home button > press and hold app in question > tap red minus that appears > then reopen from home screen).

  • How does one sync music from iTunes on a Mac with an HTC Windows 8 phone

    How does one sync music files from iTunes running on a MacBook Pro with an HTC Windows 8 phone?

    One doesn't.
    Itunes syncs with Apple devices.
    You can put the music on your phone. You would have to read the directions for your iphone to learn how to put your music on it.

  • How do I add another operating system for Dual boot in Windows 8.1 boot configuration?

    Hello,
    I am trying to create a dual-boot Windows 8.1 Pro system to allow both 32bit and 64 bit Windows 8.1 versions.  I currently have Windows 8.1 32bit installed.  Appreciate some background on how to add 64bit Windows 8.1.
    Thanks, in advance.

    The easiest way is to do this (this assumes some technical knowledge as well as access to the currently installed operating system and the 64bit install files)
    1: launch diskpart from run or cmd
    2: select the current OS disk using "select disk 0"
    3: select the current OS volume using "select partition x" where x is the number of partition (you can use "list partition" to see all current partitions)
    4: enter "shrink minimum=xxxxx" where xxxxx is the size in megabytes you want to new OS to have
    5: Enter "create partition primary"
    6: Enter "format quick fs=ntfs label="Windows x64""
    7: Enter "assign letter y"
    8: select your current system partition using "select partition x" where x is the number of partition. If you have a UEFI install on a GPT disk, this partition will be formatted in fat32. Otherwise, it will be a 100mb NTFS partition
    9: Enter "assign letter s"
    10: exit diskpart, and open up an administrator cmd prompt
    11: Enter "dism /get-imageinfo /imagefile:e:\sources\install.wim" where e: is the drive letter that you have your .iso mounted in. If you have the iso extracted, you can just point to the current extracted area then \sources.install.wim. This will
    show you a list of indexes that the .wim file supports. A standard retail version of the .iso will have Windows 8 Pro be index 1. If it is not, just change the index number in the next command.
    12: Enter "dism /apply-image /imagefile:e:\sources\install.wim /index:1 /applydir:y:"
    13: Enter "bcdboot y:\windows /s s: /f UEFI" (if you are using a MBR disk and not UEFI with a GPT disk, enter /f BIOS instead)
    14: Reboot, select the x64 partition in the menu that comes up, and you are good to go!
    You can also just create a new partition using disk manager then boot to the x64 disk and install it to the new partition, but that runs the risk of accidentally installing over something that shouldn't be if you select the wrong disk.

  • Just loaded windows 7 on a macbook pro - how do you dual boot OS X and windows 7

    Hi successfully loaded windows 7 and partitioned drive (I need windows for work Microsoft crm system)
    All ok but a pain to have to keep logging off and on between OS X & Windows
    I understand that there is a way to dual boot - I am running Snow Leopard on a macbook pro lap top OS x 10.6.7
    Can anyone help please
    Ian

    You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
    You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
    I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
    Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

  • How to implement a dual booting PXI system using windows 7 and labview RT

    Good Day
    My name is Mariano Ocana from the University of Manitoba, and I want to implement a dual system using windows 7 and labview RT in a PXIe-1082 chassis with a PXIe-8102 embedded controlled (the chassis came with windows 7 installed). What are the steps to use both systems (windows and RT)  in the same chassis?, in the NI help comes an example implementing a dual system using windows xp and RT, it is the same procedure?.
    Thank you in advance for all your help.
    Regards
    M. Ocana

    Greetings, Mariano.
    The real issue you have to contend with is whether or not you have a LabVIEW RT license.  If the 8102 controller was purchased Windows-Only, you likely do not have a license to run LabVIEW RT on the controller - you can purchase one, I think it's about $500, and at that point you can request a LabVIEW RT Configuration CD (that's not what it's called, but the sales guy will know what I'm talking about).  The Config CD is a CD that will partition your controller correctly with both FAT32 and NTFS filesystems (in the appropriate way) to allow you to run Windows 7 and LabVIEW Real-Time on the controller correctly.  Once done, you can then switch within the BIOS between LabVIEW Real-Time and Windows in order to dual-boot.  
    Either way, you likely need to contact NI sales to either purchase an RT license (if one was not received at the time of purchase) or to request a Configuration CD (it might also be called a dual-boot install CD or similar).
    -Danny

  • Ultra 40-M2: How to dual boot Solaris 10 and Windows XP?

    I have an Ultra 40-M2 with 3 300-GB SAS drives.
    First two drives I will use for Solaris 10 and mirror them using Solaris Volume Manager.
    The 3rd hard drive contains Windows XP. I want to be given the option of booting into Windows. By default, I want to boot into Solaris 10.
    How do I enable all this? Is there a configuration file I need to edit in Solaris to create this dual boot?

    You don't need to configure GRUB. If the third drive is XP only, you can setup the boot order in your BIOS and when you boot the system you can hit the F8 key and select to boot from your XP drive.
    It works very well for me.

  • How do I sync between a PC & a Mac?

    I used to go back & forth between my PC & my Mac w/ my iPod but now it won't let me. The PC says I need to format the ipod to the PC. I first formatted it to the PC then I got a macbook. I don't remember reformatting it to the mac but I must have. Can I reformat it to the PC & then will both let me sync? My new PC runs vista.

    firstly, reformat you ipod to windows. then after itunes automatically syncs all your files from the windows com, go to the summary page for your ipod and select Manage music and videos manually. This will thus allow you to sync your files between both platforms. However, you will need to drag and drop the files to sync. You are now unable to sync your ipod on windows because windows does not support mac format. also enable disk use if you want to use your ipod as a portable hard disk.

  • How can email sync between iphone4 and mac?

    I want to read email once on either my iPhone4 or Mac, then delete the email from BOTH DEVICES. I don't want to read the same email on my iPhone4 and my Mac.
    Do I need to manage this with my internet service provider (in thsi case Cox), or are there setting in iPhone 4 to take care of this duplicate email phenomenon?
    Thanks.

    it will only remove deleted mails when you sync it with the computer
    and only one accounts that are set as sync accounts so not when you set them up on the iphone itself
    in which case it's a standalone account not a sync one
    synced accounts are created in the info tab on the iphone when connected to itunes
    otherwise you have to make sure that your email account is pop3 rather then imap and that it's set to delete
    mails from server when downloaded that should work
    but it needs to be set on both the iphone and the computer

Maybe you are looking for

  • How can I use a different computer from the one on which the initial setup was run for my iphone 3gs?

    I would like to use my new MacBook to manage the information on my iphone. Attempts to use any other computer other than the original one used in the initial setup generates a message that warns me that everything on the iphone will be erased? How ca

  • Not enough RAM - CS2

    Hi! To begin I will say that we have been using Photoshop CS 2 in our company for about two years without a problem. The problems started last friday. I have not changed any settings, installed any plugins etc. before these problems started. Neither

  • Unable to activate ASR for an asset in Ops Center

    While activating an asset in ASR it gets failed. There was a case opened with Oracle but they suggested to Re-install Oracle Ops Center . Is there any alternate method to solve this issue . The problem was that a host was added a long time ago with a

  • Moving persistent data from boss to boss (document conversion)

    I'd like to move one of my persistent data implementations from one boss to another. Unfortunately, there are documents created with an older version of the plugin that are still in use and would become incompatible with the new plug-in version. Doub

  • Populating T001T (Company Code Long Description) table

    Hi All, I was wondering if anyone can help me as to how to populate T001T table.  Below is what I did: > SM30 > V_T001T > Enter Company Code > Enter Name of Standard Text > Enter Text Usage (Company Code Long Description) > Press Enter Once I press '