How do I sync MacBook Pro to my Mac Pro (everything - not just mail, but every single file.

I can hook my laptop to time machine when I get home, then I can use migration assistant to put exact data on user account on my Mac Pro desktop computer, but that is silly. 10 years ago or more, I just connected the laptop with my desktop computer and it would ask to "sync" up. How do I do this with TODAY'S operating systems.

I can hook my laptop to time machine when I get home, then I can use migration assistant to put exact data on user account on my Mac Pro desktop computer, but that is silly. 10 years ago or more, I just connected the laptop with my desktop computer and it would ask to "sync" up. How do I do this with TODAY'S operating systems.

Similar Messages

  • How to repair my macbook pro when i had delete the app store file and know it telling that appstore file has been damage or incomplete and i had the version 10.6.8

    how to repair my macbook pro when i had delete the app store file and know it telling that appstore file has been damage or incomplete and i had the version 10.6.8

    so is their is any way that i can solve this matter

  • How do i sync macbook pro & mac pro tower

    how do i sync my address book & calendar between my macbook pro & my mac pro tower?

    Hi ...
    Helps to tell us which Mac OS X you have installed when you post for help.
    If you have Lion v10.7.2 or higher installed, you can setup an iCloud account so that you can sync your Contacts and Calendars between your Macs via Wi-Fi.
    Apple - iCloud - Learn how to set up iCloud on all your devices

  • New MacBook Pro hard drive is full - but Nearly All Files on DropBox. Please Help!

    I recently bought a new MacBook Pro and I am no longer able to download files from my email because it is out of space. I store everything on DropBox and nearly no files on the hard drive. I am looking for assistance to reduce the 72.68GB of "other" on my hard drive. Many Thanks!
    about my Mac:
    Storage Space:
    <Image Edited by Host to Remove Personal Information>

    You have a very small hard drive, and not enough free space for your computer to function well. You need an external hard drive. If you anticipate adding a lot more files, you can clone your existing system to the external, and then boot from it. Or you can shift some of the stuff that you currently store in Dropbox to a backup area on your external drive, and then cut down what you keep in Dropbox to contain ONLY the files that you need to be able to access when not at home. You can also change the location of your Dropbox folder, with the caveats noted at the bottom of the help article I have copied below:
    From Dropbox Help:
    How do I move my Dropbox folder to a new location?
    You can move your Dropbox folder to any location on your hard drive using the Dropbox desktop application. If you decide to move the folder, we strongly recommend choosing a location on the same hard drive as your operating system. Dropbox won't work correctly should the Dropbox folder ever become inaccessible.
    You can select the new location from the Dropbox desktop application preferences.
    Using the Dropbox desktop application on Mac OS X
    Click on the Dropbox icon from your menu bar.
    The Dropbox icon 
    Click on the gear icon and select Preferences... from the menu.
    Click the Account tab.
    Move the Dropbox folder location by selecting your folder from the drop-down menu labeled Dropbox location.
    Let Dropbox move your folder and its contents to its new location.
    Important: Your Dropbox folder will keep the same name as before and can't be changed by using the move feature. Dropbox will not sync your Dropbox folder if it has been manually renamed or moved through your operating system. If Dropbox loses track of your Dropbox folder, it will attempt to re-sync the folder in its entirety using its last known location.
    Dropbox for Business users: If you've connected a personal and a work Dropbox, you'll see both of your Dropboxes listed here. Select the correct toggle before moving the Dropbox folder location.
    For our advanced users
    If you want to put your Dropbox folder on an external drive, proceed with caution:
    The Dropbox folder must be available when your computer boots and before the Dropbox desktop application starts. Some USB drives, for example, take some time to mount before your computer recognizes them. The Dropbox desktop application could start before such a drive is ready and get confused. You'll receive an error and Dropbox will give you the opportunity to relink your Dropbox account or exit if it is unable to find your Dropbox folder.
    If the external drive is disconnected from the computer while Dropbox is running, there's a small chance that the application will start deleting files before realizing that the entire drive has been removed. Again: When it comes to using an external drive for your Dropbox folder, tread carefully.

  • I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

    i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

    Hello Shailendras33,
    Congratulations on your new MacBook Pro!  Thank you for providing all the information about what is going on with the charging issue. 
    Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
    When you first connect your power adapter to your MacBook Pro, an indicator light on the
    MagSafe connector starts to glow.  An amber light indicates the battery is charging.  A green light indicates that the battery is fully charged.
    You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
    MacBook Pro User Guide
    http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
    It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting.  I recommend resetting your System Management Controller when something like this is occurring:
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • When I turn on my MacBook Pro will not boot up but it will have the loading gear revolving and the apple symbol is crossed out

    After installing ProTools 10 and I have a drivers I tried to restart my MacBook Pro, but it will not boot up. It was just working fine and I restarted it because I ran a java upgrade and it will not boot. I tried to cold boot it, but it still allows me to login in pass the encryption login the the loading symbol keeps revolving and doesn't stop.

    If you've activated FileVault, only the users that were authorized to unlock the startup volume will appear in the pre-startup authentication dialog. Once the system has started up, all users will appear in the login dialog.
    To authorize more users after the volume has been encrypted, select the FileVault tab in the Security & Privacy  preference pane. Click the lock icon in the lower left corner and authenticate to unlock the settings, if necessary. Click Enable Users...
    You should only enable users whom you trust implicitly with all data on the system, not just their own data.

  • How do I sync MacBook Pro's old iCal calendar with iPhone 4?

    I had MobileMe, which as you all know, was not a perfect program. MobileMe left me with duplicates of every Calendar but I am not sure which one to delete of each pair for fear of losing date. But it did sync my iPhone and my iCal on my MacBookPro. So when it was suggested that I move to iCloud, I thought: Great idea. Maybe this program will work better!
    Well now I have no syncing between iCal calendar and iPhone iCal calendar.
    Does anyone know how to use this thing?
    AGH!
    Thanks for any help you can shoot my way. Assume idiocy: step 1, step 2, step 3 appreciated and for each device if you know how to fix this!

    Contacts and calender you can put on icloud then sync to your new phone when its setup to the icloud account. Not sure so with emails.

  • How come my new macbook pro doesn't have ABC Bulletin as a font?

    how come my new macbook pro does not have ABC Bulletin font?

    Because you haven't installed it.

  • Macbook pro charger not working sometimes

    Sometimes my macbook pro would not work.. but then other times it would work.. I don't know what's going on and what to do to fix it. My charger also started to be like this today.. on my 1 year anniversary with this macbook -_- Any solutions to?

    Do a SMC Reset and follow the Magsafe links here
     Cheat sheet to help diagnose and fix your Mac
    Backup your data!
     Most commonly used backup methods explained

  • I am using Endorange as my main mail, but every time i wannt to send open pdf docement as e-mail my computer comes up with other mail softwere called mail, how do I chance that?

    I am using Endorange as my main mail, but every time i wannt to send open pdf docement as e-mail my computer comes up with other mail softwere called mail, how do I chance that?

    I am using Endorange as my main mail, but every time i wannt to send open pdf docement as e-mail my computer comes up with other mail softwere called mail, how do I chance that?

  • I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

    I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes?  I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
    I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

    Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version.  The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

  • MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

    Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

    Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
    Run the Startup Manager to select Startup disk:  http://support.apple.com/kb/HT1310
    If those did not work your disk may be sick or dying.  The top priority at this point is to make a backup copy of your data.
    Check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Even if it does not show “Verified” you can still attempt a backup. 
    Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.
    If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable.  A trip to an Apple store for confirmation would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one.  Any 1 TB external drive will do.
    Assuming it is still breathing you can try to recover the data without booting from the sick disk. 
    Reformat the external disk.  (This will erase all data on the external disk.)
    Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    It may take a long time for the backup.
    If that will not complete post back for other emergency data recovery methods, including those from a brody.
    If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it does not finish with a green OK message try to repair it once or twice more.  If it repairs with a green OK message, will it boot normally?  If not, boot from the Recovery Partition and reinstall OS X.
    If it is still not healthy, post back for further instructions.

  • Lost my contacts, how to transfer from macbook pro to ipad

    lost my contacts, how to transfer from macbook pro to ipad

    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.
    Minimum system requirements for syncing data from a Mac to an iPad is v10.6.8 >  Apple - iPad:  Technical Specifications
    Your profile indicats your Mac has v10.4.11 installed ??

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • Need help trouble shooting on how to fix my MacBook Pro so it will start

    Ok, this is going to be a bit of a long one, cuz there are a good amount of details that go into the problem and how I have tried to fix it.
    To start, late last summer I got my Macbook Pro 15" with high resolution anti-glare, 500 GB X 7200 RPM hard drive, and everythin else standard.
    Next part of the story is that i decided to upgrade from my 3-year-old iPhone 3GS. So I preordered an iPhone 5 (never doing that again), and finally received it 10/05/12.
    Wanting to synch my new iPhone 5 ASAP so I could fully play with it, I finally synched my old iPhone 3GS with my MacBook Pro for the first time. I had not previously synched it with my MacBook Pro, because all of the songs and stuff that were on it were from being synched with my family's desktop (from maybe a year or so ago; I don't synch my phones often.). I also had been lazy this whole time in not transferring the songs and stuff from the desktop to my MacBook Pro, so thats why I didn't synch my 3GS, because I didn't want to lose that stuff on my phone until I had made time to transfer the data. Because of this, I didn't use iTunes that much and I updated it only 2 or 3 times over the year that I had if before I got my iPhone 5.
    After synching my old phone, I then tried synching the i5, but an iTunes pop up said that I needed to update to iTunes 7.0 in order to synch the new phone.
    So I canceled the pop-up, and checked the updates in iTunes, and selected update (I can't remember what it said I was updating to, but I don't think it was 7.0).
    After it started updating, it asked if I wanted to update something something else (I think it was an iOS update or something thing like that.).
    I select update, because it looks legit, and why not update the whole computer when I'm taking the time to update iTunes? So the 15-20 minute installation estimation time turns into 2 hours (I think that it said that there was 2GB of update, but not sure.).
    At that time, I think of how I don't remember if the update was 7.0 or not (maybe 6.9 or something like that was my thought.). So I tried to re-synched my i5 to make the pop up for iTunes 7.0 to come up. It came up, and I clicked the link to take me to Apple's site. I clicked the update to iTunes 7.0, and it started downloading from the internet, and it gave some download estimation time. Remember that the other iTunes and iOS thing was still updating while iTunes 7.0 was downloading. The problem was that I had to go to work a few minutes before the download of the iTunes 7.0 from Apple's site would complete and 1.5 hours before the other updates would finish. So I just left my MacBook Pro open, running, and updating/downloading.
    After work, I checked my laptop, and it said something about finalizing the installation. So I hit that button to finalize or whatever it said, and it starts finalizing.
    After waiting 10 or so minutes I check my MacBook Pro again, and it says that it needs to restart to complete the process. So I hit the restart button on the pop up.
    It restarted, and against a blue screen there was a grey pop up that said that there was some error or something like that in the installation and that I needed to restart the computer again. There was only one button on the pop up, and it was the "Restart" button. So I pressed it, and it restarted again.
    However, it didn't fully boot up (and to this day still doesn't) and get past the grey screen with the apple and the spinning gear thingy underneath it.
    After like 20 minutes, I did a forced shut off, and rebooted while holding the option button to see if I could start my Windows side, since I have my computer bootcamped, though I haven't used Windows on it yet. The three options appeared: Windows something, Macintosh something, and Recovery HD. I clicked the Windows button, and after loading and stuff, Windows was running and working. So I'm pretty sure that my problem isn't a hardware problem, but a software problem.
    So I asked a friend who is studying to be some kind of computer guy, and he suggested that I put in the Mac iOS X disk that I got with my MacBook Pro when I start up and try to get to Disk Utility. I did that, and was able to get to Disk Utility. And as he instructed, I (on the First Aid tab, I think) pressed "Verify Disk". He said that it started to look for problems and stuff. Then when it was done, I pressed the "Repair Disk", and he said it started fixing those problems. After it was done, I performed another forced shut off. I then turned my MacBook Pro on with crossed fingers, but it was still stuck on the gray screen with the apple and the gear.
    He then suggested that we try to start it in Safe Mode, so we researched how to do it on my family's desktop. I tried holding Shift after the turn on tone and releasing it when the spinning gear appeared, but that didn't work. I'm still not sure if that's the right way to start in safe mode.
    So right now I don't have any other ideas, besides spending money to get it fixed, which I don't want to do, cuz I'm not rich and I work hard for all these fancy toys.
    It ***** to have the joy of getting the newest iPhone overshadowed by my MacBook Pro not working.
    Someone, please help!!!

    First off your older OS X boot disks are no good as you upgraded OS X to a later version.
    When you held the option key down at boot, this entered Startup Manager and by what your describing you have Recovery HD, Macintosh HD (your OS X boot partition), and Windows BootCamp partition.
    To repair the drive, you enter Recovery HD and use Disk Utiltiy there to repair the Macintish HD partition.
    You also use Recovery HD to reinstall OS X 10.7 or 10.8 from Apple's servers, this should fix your problems without deleting your programs or files. (some third party with at boot kernel extension ones will have to be reinstalled)
    All you need to know is here
    Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Maybe you are looking for

  • How to print crystal report through DOS

    Can we print a crystal report from report viewer in text mode for dot matrix printer through command prompt

  • Problem using text to speech with Pages 09 and snow leopard

    Hi, I am writing a large document and use the start speaking function often to hear parts of it read back after I write it.The speech sounds great for a page or two and then starts to become choppy and skips words and eventually becomes inaudible exc

  • Code for acquiring data not working like i'd expect

    Hello everyone. I posted my code that collects voltages from an NI 9215 DAQ card. I'm wondering why it acts so interestingly. For instance, at frequencys that are multiples of ten the waveform graph is frozen in place, and at lower frequencys (2-3 Hz

  • MS Word 2013 Content Control VBA Code

    Hello,<o:p></o:p> I have an MS Word Container Control (Word 2013) which populates with an Account Number and a Description. I wish for the user to click on this combo box (which initially states "Click Here" in the control. When the User clicks there

  • Missile Command- HELP!

    I'm writing a missile command program for a class. I need help getting the enemy missiles(the ones that shoot down towards the city) to recognize the user's missiles and terminate. This seems especially hard since the users missiles are ellipses and