How do i sync the tempos for two different tracks playing at the same time?

i am new to audition so i apologize if there is an easy answer to this question, but...
i upload two different two different songs and i want to get them to play at the same time and sound halfway decent. how do i get the tempos to match?

http://www.adobeforums.com/webx/.2cccd873/0

Similar Messages

How do you sync iTunes library for two user accounts?

Hello
I have a MacBook with two user accounts - myself and my wife.
I have to do this because we both have iPhones and we need to keep our sync-ing separate or we would just keep overwriting each others preferences.
I have an iTunes library and so does my wife.
Problem...
I recently imported some songs using my account that my wife wants on her iTunes. When I logged out of my account and went into hers the songs I imported were not there!!
Question...
How do you marry and update the libraries of both accounts so no matter which iTunes library you access (my account or hers) you have all the available songs in both?
I have tried trawling through some of the zillion posts here, but the prospect of spending hours and hours was just too much to contemplate!!!!
So if i've asked a question that has already been asked and dealt with please forgive me - or better still if you know where the needle would be in this haystack a link would be very much appreciated!
Many Thanks in Anticipation.
Mr Totsy

Hi ffiti
I have done a bit of cleaning up on my Mac (OCD!) and made a bit of an ar*e of things - can you help?
I went into my wife's account and wiped all iTunes files and stored songs.
This was done because some songs were on my iTunes library and some were not on hers - so I just wiped the lot off and started again...I know it gets even better...
I then went into my user account and wiped off everything there too...
I went on the Apple website and downloaded the latest iTunes 11.0.4 I think and reinstalled an empty library from scratch - that way I will be only filling one library full of songs - I also took the media file out of the shared folder and reset it back to its default position
I went to sync my iPhone and now it tells me I can only sync one device with one library - so how do I sync my phone without it deleting everything and replacing it with nothing?!!!!
I doesn't matter how great Apple products are they just can't account for human idiocy !!!
Regards,
Mr Totsy

How do you set up iTC for two Different versions of the same app?

I have been reading the iTC Developer Guide searching for the answer to this question, but so far I have found nothing that would help. I plan on having a Lite and a Pro version of my app, and I may also have an iPad version as well.
I have seen some iPhone icons which differentiate these app by using a slightly different icon for the Lite and Pro versions, but how these are submitted to the app store is what I would like to know. And, for the sake of clarity, they will be priced differently as well.
Thanks!

Have you read the app store guidelines yet?
App Store Review Guidelines:
http://developer.apple.com/appstore/resources/approval/guidelines.html
Don't go on what you've seen in the store - for every example you spot, there are hundreds that didn't make it in.
As well, Apple is tightening up on reviews, etc.
Loads of discussion on this in the iOS Dev Forums, BTW

How can I sync my ipod shuffle so that it plays in the same order as my playlist?

How can I sync my ipod shuffle (4th generation) so that it plays in the same order as my playlist?

Is the playlist in your iTunes library, or is it already on the shuffle (as a playlist)?
If you created one or more playlists for your shuffle in your iTunes library (with the songs in the desired playlist order), you should set up automatic syncing. Here's how to do that, if you have not already...
NOTE: If the iTunes sidebar (along left side of window) is not visible, from the menu bar, under View, select Show Sidebar.
Select the shuffle in the sidebar, under DEVICES. Near the top of the window, there is a bar of buttons, starting with Summary. Click Music next to Summary. This is the shuffle's Music screen, where you tell iTunes how to sync songs. (Sorry if you know this already...)
Check the box for Sync Music. Below that, choose the option to sync Selected playlists, artists, albums, and genres. In your case, find and checkmark those playlists you want under Playlists. When you click Apply, the songs on those playlists and the playlists sync to the shuffle.
When using your shuffle, the default playlist that you are using is the All Songs list. To play songs in order, the shuffle's power switch needs to be set to the play-in-order (middle) position. However, if you are playing from the All Songs list, the songs play in alphabetical order.
To play from a particular playlist that is on the shuffle, you need to use VoiceOver to switch to that playlist. This document explains how to set up and use VoiceOver on a shuffle
http://support.apple.com/kb/HT4322
When playing from a particular playlist, with the power switch set to play-in-order, the songs play in playlist order.

How do I sync iTunes music to two different iPhones on two different user accounts?

I have read some posts and a help article about this, but I need some clarification becuause what I'm doing is not working out correctly. My wife syncs her iPhone and iPod to her iTunes. I recently purchased an iPhone and am going to sync it to my own iTunes on a different user account on the computer. How can I get the music from her iTunes account to sync with my iTunes/iPhone? Whenever I try various routes, I end up with duplicated songs on my end and I'm not sure how it works when she adds music to her account. My wife does all the music purchasing for the both of us and I want the music to sync both ways, but all other content needs to stay separate. We are running iTunes 11 on Windows 7. Any help would be appriciate and I'm sorry if this is a redundent question. Thanks.

I followed the following articles: http://support.apple.com/kb/HT1495 and http://support.apple.com/kb/HT1203
Here are the questions I have regarding the second article which is not clear to me:
When dragging the media file to a public location, the article says not to move the iTunes folder. Is it Ok that the media file is moved out of the iTunes folder when dragging it to the public location? Is this what I am trying to accomplish?
There is a note about how iTunes for Windows does not, by default, copy items added to the library to the media folder. Am I supposed to check the box to allow this? Do I do the same for all users?
When I change the music folder location, am I changing it to the new public location? Do I do this for all users on the computer that wants to use the same music files?
I tried changing the file location to the public folder, but received a message asking something to the effect of renaming files to keep the library organized. Do I want this or not?
There is another note at the end that says if all users are storing their music in the same public location, then duplicates may appear in the library. Isn't what this procedure is basically doing? Can someone clarify this?
After following this article to the best of my ability, my iTunes ended up with duplicates of everything, even starting off with nothing there to begin with.

How to route the Idoc to Two Different Locations based on the Plant Values

Hi All,
We will generate single Idoc, in that we will have 2 E1MARCM segments, one will have UK plant and another will have US plant.
Now in XI, receiver determination i need to route the idoc to corresponding folders.
How can we do this, because in x-path, we can check always for the first segment only, second segment will not come into picture.
Please suggest me

Hi,
we can check the multiline present in receiver determination and specify the condition for both US an UK receiver systems.
Or if you are sure that only two (UK and US) will come , then check the condition for Say UK and check the defualt reciver system in case of failure ,if its US it will go to the default system.
You can also try out the interface determination condition, please check if below links can help.
How to write Conditions in Interface Determination for 2 IDOCs
Single File to multiple IDoc
Reciever idoc adapter Determination error
Regards,
Srini

How to use Stock Category Group for two different configuration.

Hi all,
I want to use the stock category group to do this scenario:
I have two process using the same location, the process A wants to consider Stock cat. Grp. 'ZSW' (SAPAPO/LOC3) so it will consider Stock using CC, CF and CE. The process B wants to consider Stock Cat. Grp. 'ZST' to consider only CC.
My doubt:
How can I do that setup to make different things according the process? I tried to do something in Planning Area (SAPAPO/MSDP_ADMIN) but doesnu2019t work.
Can anyone help me?
Thanks,
-Ralph Veiga

Hi Ralph Veiga,
Indeed the stock category group is define at location level...
I think your answer involves macros more than PA settings.
First I will suggest to split the stock key figure into 2: one for CC, one for the other.
For the CC, use the standard (cetegory group with CC only on the location master)
Now you need to populate the second key figure with CF and CE.
You should be able to built a macro using function PHYSICAL_STOCK() to get what you want.
For sure yuo first need a way to check if you want or not the CF and CE. Here implement your own logic for exemple base on your product characteristics with either MAT(), MAT_C(), MAT_EXTRA(), MATLOC_C()...
Else you can use a Z function in the macro to collect this data, but it involves ABAP coding.
PS: you don't actually need to split the key figure into to, but I think it helps with visibility...
Regards
Julien

How do you sync an iPhone to two different computers?

I just got my iPhone and was adding music to it, but I have my music on two different computers, both of which I have songs I want to add to my iPhone. I was just wondering if there is a way to sync music from two different computers without having to transfer all my music to one computer?

iTunes includes a backup to disc feature with an option to backup content purchased from the iTunes Music Store only or all iTunes content - burned to CD.
You can do this and then transfer your backed up iTunes data to the other computer.
The iPhone was not designed nor intended to be a backup device or a transfer device of iTunes content from one computer to another as Ansuz82 provided to prevent music piracy.
It is always the few that would abuse such a feature if available that spoils it for the majority that wouldn't.

How can I use create/createInsert for two different tables

Hi All,
I am showing different fields in the UI from different tables. I am able to fetch the data from all the tables and able to modify and save the data.
Now, the problem when I want to create/insert some data into those columns(from different tables) I am facing issues.
How can I proceed further??

Hi Shay,
Thank you very much for your quick response.
Actually I am totally new in ADF world and I am trying to implement some applications in ADF.
I created an UI based on some 3 tables(there is foreign key relation between them) and some other tables. I am able to modify and save my application if there is any data in all the tables.
My Actual issues are
1) I removed all the data from the tables. There is a submit(CreateInsert) button, what I expected is on click of the button I should see all the fields in editable mode. But I was able to see only few fields and also in readonly mode. So here my issue is how can i create and save these data.
2) Consider on my landing page I have just CommandLink/CommandButton. After clicking that page I should get the above screen in create mode(I mean to say all fields in editable mode). How can achieve this?
Thanks & Regards,
Ravi.

How to display no data found for two different elements

i wanted to display report either by dept wise or supplier wise
so when I dont have deptno related data
It should say no data found
for that I'm using if condition
same for supplier too
instead of giving twice can I give it in the same if condition
if so how

Use logical operator 'or'
like <?if:not(DEPT_GRP) or not(SUPPLIER_GRP)?>No data Found<?end if?>

Viewing two matrix editor windows for two different tracks

I would like to work on multiple tracks at the same time using the matrix editor. I can only create multiple matix editor windows of the same track. An answer to this question would be very helpful.
G5 Mac OS X (10.3.9)

Hey Thomas,
I don't know, as you experienced, every time you jump from one track to another the matrix window updates.
I guess you have to deal with that.
Anyway if I read that it could be done I'll post you back.
Regards,
Jorge

Two different songs played at the same time in two rooms ?

Can i play one song on my computer and another in a different room at the same time using Airport Express or any other way?

No. The same music plays on the computer and AirPort Express (AX).

How can I define same Price Conditions for two different Sales Deals ??

I need to define for the same price condition, lets say ZPMP, two different values or condition records, for two different sales deals and the same valid dates
For example, Sales deal 1, ZPMP equal to USD 15 and valid dates from 04/15/08 to 04/30/08.
Another condition record for Sales deal 2, ZPMP equal to USD 20 and valid dates from 04/15/08 to 04/30/08
How can I do this.
Thanks in advance.

While creating condition tables, you have the option to create different key combinations. So if you want the system to take different condition records for different sales deals, there has to be a point of differentiation between those 2 sales deals.
This can be done in one of the following ways:
by giving customer specific prices
by giving material specific prices for a particular customer etc
All this can be defined as different key combinations while creating the condition tables. For each key combination, you can specify different condition records, so that the system is able to pull prices according to the requirement.
But if the sales deals are entirely similar (that is even the validity dates, delivery dates etc are also same), and there is no differentiating factor, then you will have to manually input the prices.
Do get back if you require more clarification. Please reward points if useful.
Regards,
Swapna

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

Can the volume for downloaded music tracks be synced and how

can the volume for downloaded music tracks from itunes be synced and how if so

Hard to know what the cause is because it's like this
I know what I did to cause this. I upgraded my one of my hard drives, renamed the drive and moved the folder. The missing pictures it can't find were added with the option in the advance menu "copy photo to library" turned off.
and this
What I did is added a small SSD as my primary drive. Put the OS and all the apps on it. Moved my iPhoto and iTunes libraries to an large external. Most of the picture it is not having a problem wth. Only certain ones. Don't actually think I unchecked tha prefeence, but it's acting like i have.
seem to be written by two different people.
This thread
https://discussions.apple.com/thread/3216539?tstart=30
has details on how one user hacked the SQL database to fix the issue. Not for the faint hearted. Back up first.
Regards
TD

How do i sync the tempos for two different tracks playing at the same time?

Similar Messages

Maybe you are looking for