How do I sync the "view size" when I copy clips from one sequence to another in FCE4?
My idea was to edit an advanced clip in a separate sequence (bad idea) and then copy it into the main sequence, but I ran into an obstacle.
For a clip to fit the window in Sequence 1 it is shown at 44%, while in sequence 2 it is enough with 22%. Problem is, when I copy a clip from sequence 2 to 1, it appears twice the size. How can I adjust this? The clip from sequence 2 becomes disproportionately big on the screen when copied to sequence 1.
Thank you for taking your time.
As Studio X pointed out, you open a huge can of worms when you work with sequences of different specifications, but try this -
once the clip has been pasted into the sequence, click on it on the timeline so that it is selected. Now Control-click on that clip, and from the drop down menu, choose Remove Attributes.
When the remove attributes pane opens, check the box for Basic Motion and Distort (if they are not grayed out) and click OK. This should reset the clip size.
If this is successful, you can do this to multiple clips all at once by selecting them, then clicking on any one of the selected clips and doing the above.
MtD
Similar Messages
-
How do you sync the auto-complete facility in mac mail from one device to another?
Hi - Autocomplete in mac mail works fine on my macbook pro. I just got a Mac Pro and it want to do the same but it doesn't. It seems only to read the addresses in my address book and not memorize any of the ones from the "TO" field in Mail? Thanks....
As Studio X pointed out, you open a huge can of worms when you work with sequences of different specifications, but try this -
once the clip has been pasted into the sequence, click on it on the timeline so that it is selected. Now Control-click on that clip, and from the drop down menu, choose Remove Attributes.
When the remove attributes pane opens, check the box for Basic Motion and Distort (if they are not grayed out) and click OK. This should reset the clip size.
If this is successful, you can do this to multiple clips all at once by selecting them, then clicking on any one of the selected clips and doing the above.
MtD -
Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.
The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this? -
How do I copy clips from one project into another?
Ok, I have gathers a bunch of clips from various events to forma project. Now I want to rearrange everything in a new project. Can I somehow get my first project to act like an event? That way I can grab the clips into a new project window... Thanks
If I understand what you are trying to do, you do not need to "get my first project to act like an event". Merely drag the same clips you used in your first project from their original event location(s) into the new project. Then reorder or re-edit the clips as desired. There is no need to make them into a "dummy" project first.
If you want to have EVERY (or almost every) clip in both the first and new projects, with the second merely being reordered or re-edited, use the *File > Duplicate Project* menu command. Then go to work on the newly duplicated copy of the project. You can rename the duplicated project as desired and reorder, edit, or delete the clips in the duplicated project without dragging them from any event.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
On my old (Win XP) computer I had saved hundreds of messages in Local Folders.
I got a new Windows 8.1 computer a few months ago. I installed Thunderbird and have been using it ever since. But I would like to copy the contents of the Local Folders from the old to the new computer.
Is there a way to transfer them on a memory stick and get them loaded into Thunderbird on the new computer?On the XP computer, select Help/Troubleshooting Information, click Show Folder to open the profile folder in Explorer. Open the Mail subfolder, then the Local Folders subfolder. There, you will see files with the name of your folders, but with no extension. These are the mbox files that contain the messages; copy them to the memory stick.
On the other computer, repeat as above to open the profile folder, exit TB, and copy the mbox files into the Mail/Local Folders directory. Open TB, and you should see the folders under Local Folders. -
App Store, Contacts App
We are only other users here.
Share the idea with Apple as feedback about the iPad;
Apple Feedback
http://www.apple.com/feedback/ -
The message section of my Mail is very tiny to read as I type my messages. How do I enlarge the viewing size of my window?
I am referring to outgoing new messages that I am typing.Can you drag the bottom right corner? You can in Snow Leopard, and I imagine you can in Lion.
-
How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.
Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
iPhoto is not the program to be doing that in and I don't think it even has that option.
So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image. -
How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.
You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad -
How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?
When you drag images from iPhoto to iWeb, iWeb retains the original filename.
When you use a mask, iWeb creates a png file with the shapeimage name.
So do not use a mask and crop your images before dropping them on the iWeb canvas.
When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
You can use a 3rd party application to create the png images yourself, and give them a proper name.
Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images. -
I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.
There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP -
When dragging a thumbnail from one place to another, the origional thumbmail ends up in other locations. Sometimes the same thumbnail covers up other thimbmails.
Hi christophers37215878
Please elaborate your issue.
What exactly are you trying to achieve?
Which Adobe Product or service are you referring to?
Can you please provide the screenshot?
Regards,
Rahul -
HT3819 how do I copy songs from one ipod to another
How do I copy songs from one ipod to another?
Transfer the songs to iTunes and then sync to the other iPod.
-
How do i copy music from one ipod to another with 1 cord?
how do i copy music from one ipod to another with 1 cord?
You cannot copy content directly from one iPod to another. If the music was purchased from the iTunes Store, you have the following options:
- sync the iPod to your computer, transfer the content to iTunes, and then connect the other iPod and sync from iTunes
- use iCloud (which requires iOS 5).
- download the music from from the iTunes Store to the second iPod. See:
http://support.apple.com/kb/ht2519
Regards.
Message was edited by: varjak paw -
How do you copy automation from one track to another?
How do you copy automation from one track to another? Occassionally I mistakenly blow away a track's automation. I open up an earlier version of the song to try to get the automation. It doesn't seem that you can copy and paste the data. After some struggle, I find a way. Is there an easy way?
1. Copy the track containing the desired automation to another track. (create a track below it to keep things organized)
2. Double click on the region and delete the notes.
3. Now copy the region to the desired track.
P.S. Of course when Logic asks if you want to copy the automation data you say yes)
Maybe you are looking for
-
Won't boot--stuck on grey screen...
...and I think I'm in trouble. Booted up with an external DVD drive and the installation disc, and successfully ran verify and repair disc and permissions. No change. Went to a link provided by a friend, and tried a monitored safe boot. Things progre
-
Everything works fine, but my LEDs are flashing amber since a power outage
I'm not having any issues with my new Airport Express base station, except that it's flashing amber all the time. This happened recently after a power outage in my house. It was odd also that a soft reset reset the base station as if I had done a har
-
This Ipod i bought at a garage sale for 25$. i went home and plugged it into my computer an it wont read on my computer at all wether its itunes or windows. what can i do to make it show on my pc. i tried to register it and it told me that its linked
-
How to undo "select distinct" in OBIEE
Hello guys I found that pretty much in all the reports that we created in OBIEE, the presentation service would generate SQL that starts with "select distinct" when I view the query log.. I'd like to know what configuration in the Admin Tool or prese
-
hi, i am trying to display images, which are in db, as report on html db. schema: yy table name ; xxx column ; image(blob) in definition region>source>> select sk,'<img src="#yy# width="480" hight="480" />'img from xxx S WHERE S.SK = 16310 It doe