How do I synchronize multiple sequential clips using audio waveforms in Premiere Pro CC?

I recorded a concert at my kids' school. I ended up with:
Video in six separate clips (video+audio) from my Canon 5D Mark III camera
A single audio clip from my Zoom H4n recorder
The 5D Mark III can only record clips of up to 4GB in size, and clips 30 minutes in length. The clips broken up by the 4GB size limit are adjacent to each other, but the clips broken up by the 30-minute limit have a stop-pause-restart gap of a few second.
On past such projects, I have used PluralEyes 3.0 to synchronize the clips. But PluralEyes converts each stereo audio track into dual mono tracks, which I don't like.
I just happened upon this video: http://tv.adobe.com/watch/learn-premiere-pro-cc/merge-clips-automatically-using-audio-wave forms/?t=0 It shows how to synchronize a single video+audio clip with another audio clip. It also shows how to synchromize multiple concurrent video+audio clips with another audio clip, for multi-camera editing. But it doesn't show how to synchronize multiple sequential video+audio clips, as I got from my Canon 5D Mark III.
It seems that every time I select multiple video clips, the Synchronize item in the pop-up menu is disabled. When I select only the first video clip and the full-duration audio clip, I can synchronize them with audio waveforms. But then when I try to select the second video clip and the full-duration audio clip and synchronize them, it breaks the sync of the first video cilp
Can Premiere Pro CC synchronize multiple sequential video clips using the audio waveform method?
I am running Premiere Pro CC version 7.2.1 (4).
Thanks.

I'm an editing newbie but this was the very first task I needed to do, i.e. align multiple video clips with a single audio track. My setup is similar. I'm shooting with a Canon 70D, which breaks up video into 4gb clips, which are continuous and easy to align end to end. But the 70D like the 5D only shoots for 30 minutes continuously, so a second or two is lost hitting record again. My external audio was recorded continuously with a camera mounted Tascam (like a zoom) with a line in to the camera. So, in theory, the audio should be the same on the external audio and the audio associated with the video clips, which probably helps the software identify the identical wave forms.
I found that I could roughly align the video clips based on the audio wave forms and then "synchronize" the audio as shown in the video (Merge clips automatically using audio waveforms | Adobe Premiere Pro CC tutorials). I found that this aligned the audio perfectly but separated the video from its associated audio track. But it's easy to select the video and snap it back into alignment with its audio. While it would be nice to have everything merge automatically, using synchronize sequentially did not take much time.
Hope that all makes sense.

Similar Messages

FAQ: How do I trim in the Timeline using keyboard shortcuts in Premiere Pro CS6 and CC?

You can now trim with a lot more keyboard shortcuts in the Timeline in Premiere Pro CS6 and CC. See this article for details: Timeline trimming using keyboard shortcuts in Premiere Pro CS6.

I'm relieved (if a little frustrated!) that others have the same issues, it makes me feel at least it's not just me! :-)
I am running Windows 7 64 bit Intel quad core processor 8Gb RAM if that helps Jim?
Another quick test shows I have exactly the same issues as shooternz and Ann Bens above at 7 & 8 respectively. An audio only or audio/video clip from Bin to SM and I can add markers on the fly perfectly. Audio/video from the timeline to SM works just the same. Audio only from the timeline will not work however.
I tried linking a video clip to my audio clip to see if that would allow me to add markers then unlink and remove the video... but when I opened that in SM the add marker button was greyed out and the keyboard shortcut (M) didn't work either!
Curiouser and curiouser...

Multi-caming merged clips using audio

I'm working on a music-driven piece. The video was shot on Red Epic while the on-set audio was recorded separately and delivered as .wav files. The piece has actors performing to a pre-recorded musical guide track. I'd like to synch the audio and video using the merge clips function, via slate; then I'd like to align those merged clips to the pre-recorded guide track that the actors performed to. Ideally this would be done using the audio waveforms synching function. But it seems I can't multi-cam the merged clips this way. I'd like confirmation of this from someone who isn't as new to Premiere as I am; and perhaps another workflow suggestion would be greatly appreciated.

I'm an editing newbie but this was the very first task I needed to do, i.e. align multiple video clips with a single audio track. My setup is similar. I'm shooting with a Canon 70D, which breaks up video into 4gb clips, which are continuous and easy to align end to end. But the 70D like the 5D only shoots for 30 minutes continuously, so a second or two is lost hitting record again. My external audio was recorded continuously with a camera mounted Tascam (like a zoom) with a line in to the camera. So, in theory, the audio should be the same on the external audio and the audio associated with the video clips, which probably helps the software identify the identical wave forms.
I found that I could roughly align the video clips based on the audio wave forms and then "synchronize" the audio as shown in the video (Merge clips automatically using audio waveforms | Adobe Premiere Pro CC tutorials). I found that this aligned the audio perfectly but separated the video from its associated audio track. But it's easy to select the video and snap it back into alignment with its audio. While it would be nice to have everything merge automatically, using synchronize sequentially did not take much time.
Hope that all makes sense.

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

How to use VST Plugins from Premiere Pro CS5 in Adobe Audition 3.0 ?

I have tried to use VST plugins from Premiere Pro CS5 into Adobe Audition 3.0, but could not use it.Is any method to use them ?

Unless I'm mistaken, you can't do this at all - Adobe lock all their VST effects so that they only work with the app they were intended for. Which also means, of course, that you can't use Audition VST plugins with any other software either. Since Audition isn't currently in the CS, there isn't even an exception there, I suspect.

How do I get my file into the time line in Premiere Pro CC?

How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

Hi Aneumann,
Welcome to the Forums.
You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
Regards,
Vinay

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Using AE titles in Premiere Pro movie

I used Dynamic Link from Premiere Pro (CS5) to AE to create titles for a video (~2hours) I created. The problem was I made AE the size of my movie with titles throughout the timeline. When I went to render in Encore, Premiere Pro would crash after an hour or so. I ended up removing the AE titles all together, and everything rendered fine.
My question: Is there a way to use AE titles without having to create multiple AE comps for each title to link into Premiere Pro? For example, my 2 hour movie has 20 titles - will I have to dynamically link to AE 20 different times?
Thanks in advance.

Yes. Its really no big deal if you are familiar with using AE in a dynamic link relationship with PrP.

The quality of the footage is lost when I use certain settings in Premiere Pro CS6

Hello ,
   I filmed footage on a Canon XA10. They are MTS files and the codecs are 1440x 1080, frame rate 29.97, H264- MPEG- 4AVC, input nitrate 9854, and stream nitrate is 8971
I need to submit them as application samples for a job. The job requires certain settings to be used.
for HD 1080i the application sample should be 960 x 540 @ 29.97
they have other settings, like NTSC should be 320 x 243 @ 29.97
With one file I filmed rain and in the original file it's clear and the quality it really good. I export using the settings H.264 and Apple TV, iPad, iPhone 4 or newer - 960 x 540 29.97
under basic video settings is
    width 960
    height 540
frame rate 29.97
After exporting it the .mp4 file came out pixelated and the image quality is much lower.
I had another problem with a file shot with the same camera and the same codecs (MTS files and the codecs are 1440x 1080, frame rate 29.97 ect.)
It was footage that I had to speed up, after exporting it came out shaky. When I export with the 1440 x 1080 settings it's not shaky, but I need it to be 960 x 540. I can't turn in shaky footage.
What am I doing wrong and how can I get footage that is acceptable for submission?

Here is an example of how much quality is lost..
shooternzforumnotifierThe quality of the footage is lost when I use certain settings in Premiere Pro CS6Premiere Pro

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

take have to take turns
and you have to disable one and enable the other manually

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

Timeline trimming using keyboard shortcuts in Premiere Pro CS6

Just wrote a new blog post about Timeline trimming using keyboard shortcuts in Premiere Pro CS6.
It's in the FAQ now, as well.
Check it out.

Good question. If/when it does it again, I'll check. However, until you asked that, I never noticed the keyboard layout options and that one of them is CS5.5. That's an easier fix for me than re-customizing everything, as I was just wanting the CS5 layout.
Something else I noticed is that my workspace is set for "Import from Project" and I'm supposing it's possible that the keyboard layout is connected to the workspace and might be either resetting it to CS6 or custom, which may or may not have had those customizations. About 25% of the projects I'm working on currently are pre-CS6, so every time I load one of those up, it might be making everything else go wonky.
In any event, I have a better idea what to look out for now. Thanks

If I select a clip on my Timeline in Premiere Pro cs6, everything to the right of it is also selected. What can I change in my settings to prevent this from happening?

If I select a clip on my Timeline in Premiere Pro CS6, everything to the right of it is also selected. What can I change in my settings to prevent this from happening?

Most browser have a addblocker or addblocker plus.
Safari>Extensons
Firefox is a add-on. Firefox>Tools>Add-On

Use After Effects and Premiere Pro CS4 with Creative Cloud license

I have a one-year license for Creative Cloud, but because I have a 32-bit version of Windows 7, I can't use After Effects and Premiere Pro. On the website I read that for users with a 32bit OS it is possible to use AE and PP CS4 with the CC license. But I can't find a way to download CS4 with my Creative Cloud account. Can anybody help me with this? Is it possible to download CS4 with a CC license?

I have marked the remark in red. It says: "If you want to use the Windows XP supported After Effects or Adobe Premiere Pro, you have to download the CS-4-versions of the software with your Creative Cloud Membership. U can also use these versions with a 32-bit Windows Operating System."

How do I synchronize multiple *sequential* clips using audio waveforms in Premiere Pro CC?

Similar Messages

Maybe you are looking for

How do I synchronize multiple sequential clips using audio waveforms in Premiere Pro CC?