How do i syncronise two macs on the same network

I currently have a macbook pro, and that is now going to be my home office computer. I am about to buy a macbook air as my travel laptop. I will need them to have the same information on how do I keep them syncronised when I update information on one or the other.

How to Keep Two Macs in Sync
osx - How to keep two Macs in sync?
syncing two macs: what will work...:
Synchronizing two Macs using an Intermediary
Sync several Macs: sync Macs with Mac OS X sync tool SyncMate
Best Sync app for two macs?

Similar Messages

How can I connect two macs in the same network?

Both are connected to the same network. One via ethernet and the other via Wifi (Airport Extreme). Both share the same Internet conection. I have followed instructions for files sharing. I can access only the computer linked to my home network via ethernet, but not the other way. It does not found the server address provided in file sharing by the computer conected via Wifi. Any clue? Can it be that the IP address of the Wifi conected is DCHP?

Are you using Connect to Server or Shared sidebar in the Finder? What OS X versions do the two machines run?

File Sharing problem between two macs on the same network.

Have a iMac and a Mac Mini and a MacAir on the network. We have file sharing turned on on all 3. The Mac Mini keeps popping up a error message that states "There is a problem connecting to a Server "iMac". However the Mac Mini is connected to the iMac and is sharing files between the two.

This has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Use two interfaces on the same network

Hello every one,
I actually starting to work on a cisco project. I'm a beginner on networking and cisco technologie.
For my project we use a router 2921.
We got two network:
- Network A: 192.198.0.X / 255.255.255.0 / Gateway 192.198.0.1
- Network B: 162.168.0.X / 255.255.0.0 / Gateway 162.168.0.1
Each network use switch, Switch A (connecting to network A) is connected to interface G0/0.
And Switch B (connecting to network B) is connected to interface G0/1.
Router well configured as:
- G0/0: ip address 192.198.0.1 255.255.255.0 (network A)
- G0/1: ip address 162.168.0.1 255.255.0.0 (network B)
Every think working fine.
The problem is with this one, we need to connect a computer on G0/2. This computer is configure as network A (192.198.0.10 / 255.255.255.0 and same gateway).
I can't configure G0/2 as 192.198.0.1 255.255.255.0 (network A), cause G0/0 use this adresse.
I can't put this computer on the switch A, my only physical possibilité is to connect him on G0/2.
We just need to use interface G0/0 and G0/2 as a switch on the router with the same gateway (192.198.0.1)
How can i connect this computeur? How can i configure two interfaces on the same network and same gateway?
Thanks you

I would just put the PC on a different network, but if you really want it to be in the same network, you could use IRB to connect two of the interfaces on the router at layer 2.
Here is an example config for IRB:
interface FastEthernet0/0
bridge-group 1
interface FastEthernet0/1
bridge-group 1
bridge irb
interface BVI1
ip address 192.168.0.1 255.255.255.0
bridge 1 route ip
Notice that the physical ports do not have IP addresses on them, the IP for the subnet is on the BVI interface.

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Can you be logged into two macs at the same time?

can you be logged into two macs at the same time?

Basically, yes. If there's some kind of issue, please describe it a little.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts if changes on all computers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.

you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900.

How do you sync two Ipods to the same MacBook?

Have a nano already synced to my MacBook. Want to also sync my 5th gen 30GB Ipod to the same MacBook. Have only had my MB for 3 months after 18 years of PC platform (yes I'm drinking the KoolAid baby.) This notebook is fantastic.
An issue I had with my old PC was that you couldn't sync two Ipods to the same PC unless you held down the shift key while accessing ITunes to select a library - or something like that.
Please tell me that if I plug my 5th gen into this MacBook it won't overwrite my nano songs/info that are already on this MacBook? Apple has to have done it easier than how I had to do it with the PC. Any help from you experts out there will save me a ton of grief..........Thanks! R.Ty

Thanks!
No problem.
My issue is however that in addition to all of the songs that I have purchased via ITunes, I have about 600 songs from my own CD's on the 5th Gen that if I restore will be gone. Time - yes....money - a little.... It would be great if I could de-authorize the PC it was synced to and now work off my mac....
In that case, check out these different media recovery options by Zevoneer for copying music from your iPod to your computer.
http://discussions.apple.com/thread.jspa?threadID=1900086&tstart=0
And check out this older post of mine on different ways to copy music to your computer from your iPod as well.
http://discussions.apple.com/message.jspa?messageID=12000345#12000345
What you need to do is first copy all the music currently on your 5th generation iPod to your new Macbook. Once you have done that, you are free to *Erase and Sync* it upon plugging it in, or restoring it via iTunes as described above.
And if you are adding purchased music, you will need to authorize your computer if you haven't done so yet. To do this, choose Authorize from the Store drop down menu in iTunes.
B-rock

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How can I produce two outputs of the same project

Dear Sir,
My aim is to produce two outputs of the same master project,
HTML help and Webhelp each one will be used differently in my
compnay.
Producing two outputs is fine but the problem was that
external links are done differently for HTML help and Webhelp and
as I Knew from you that this can be solved using conditional tags.
Actually I am new to conditional tags and I don't know how to
use them. Could you please help me to do this or recommend a link
on how to use condtional tags to produce different outputs.
Thank you very very much

Hi there ahlam323
See if the link below helps any. Some goober wrote something
on it.
Click
here to read the goober's guide
Cheers... Rick

How do I separate two movies on the same timeline?

I'm using Premiere Elements 11 but have not used it for a while so I've forgotten much of what I've learned. So here is my question: I have two movies on the same timeline. How do I separate them. In other words, how can I move one over on the timeline so it will not confuse my editing of the other one? But better yet - how can I just take one movie off the time line completely and edit it later as a separate movie. I really have four short movies - one minute long. I'd like to edit them separately, with a new file name. I don't know how to do this anymore.

Tommyvincent
I have been doing some homework on the questions that you raised in this thread.
Observations....
1.
After you import a video into Project Assets, you can right click it, select Rename. That file when dragged to the Timeline will have the new name.
But...
If you import a video into Project Assets, drag it to the Timeline, right click the Timeline clip, select Rename from the pop up, then the Timeline file will be renamed but not its thumbnail in Project Assets. You would have rename that Project Asset thumbnail to match if you wanted to. But, these renamed files still trace back to the original with its original file name at its hard drive save location.
2.
About getting off your Timeline...one way would be to export the clip selectively if it were in group of clips on the Timeline. Two requirements for that
a. In Edit area, set the gray tabs of the Work Area Bar to span just the segment to be exported
and
b. In the export area, have a check mark next to "Share Work Area Bar Only" option.
3.
If you brought a clip into Project Assets, double clicked it to open its Preview Window, you could trim the clip with the Set In and Set Out points and create "subclips" with new names in Project Assets. These "subclips" would be part of that project's media that could be dragged to the Timeline when needed.
Please review and determine if any of the above is going in the right direction for what you want to do.
Thank you.
ATR

How do I open two profiles at the same time?

until i updated to Firefox 7 i got prompted to which profile i want to open every time i open firefox, i am using one profile to play and one for work. i get prompted the first time but not the rest of the time how do i fix it so that i can again run two profiles at the same time

See:
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

How do I join two tables in the same database and load the result into a destination table in a SSIS package

Hi,
I have a query that joins two tables in the same database, the result needs to be loaded in a destination DB table. How do I do this in SSIS package?
thank you !
Thank You Warmest Fanny Pied

Please take a look at these links related to your query.
http://stackoverflow.com/questions/5145637/querying-data-by-joining-two-tables-in-two-database-on-different-servers
http://stackoverflow.com/questions/7037228/joining-two-tables-together-in-one-database

How do i syncronise two macs on the same network

Similar Messages

Maybe you are looking for