How do I tag names in facebook posts?

Hi,
I'm using facebook for Ipad and I don't know how I can tag people's names
in my post (similar to mentioning someone). I tried using the "@" symbol
but it does'nt work. How do I tag names in facebook posts?
Thanks.

Settings>Mail, contacts, calendars>Contacts>Sort Order. You can use, last name, first name or first name, last name.

Similar Messages

  • How to pass tag name and value dynamically in the output of PCo notification?

    Hi,
    I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
    Thanks in advance.
    Regards,
    Suman

    Hi Suman/Jeedesh,
    As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
    For above issue, My suggestion
    1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
    2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
    3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
    4. And in the mean time, send those Tag details vie mail trigger or as per requirement
    Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
    Hope it might solve your problem
    Regards,
    Praveen Reddy

  • How can I create my own tag name while creating a partition table.

    I have X4500 running Solaris 10. I have formatted a disk and created partition table as given below.
    Specify disk (enter its number): 0
    selecting c0t0d0
    [disk formatted]
    /dev/dsk/c0t0d0s0 is part of active ZFS pool zpool1. Please see zpool(1M).
    FORMAT MENU:
    disk - select a disk
    type - select (define) a disk type
    partition - select (define) a partition table
    current - describe the current disk
    format - format and analyze the disk
    fdisk - run the fdisk program
    repair - repair a defective sector
    label - write label to the disk
    analyze - surface analysis
    defect - defect list management
    backup - search for backup labels
    verify - read and display labels
    inquiry - show vendor, product and revision
    volname - set 8-character volume name
    !<cmd> - execute <cmd>, then return
    quit
    format> partition
    PARTITION MENU:
    0 - change `0' partition
    1 - change `1' partition
    2 - change `2' partition
    3 - change `3' partition
    4 - change `4' partition
    5 - change `5' partition
    6 - change `6' partition
    select - select a predefined table
    modify - modify a predefined partition table
    name - name the current table
    print - display the current table
    label - write partition map and label to the disk
    !<cmd> - execute <cmd>, then return
    quit
    partition> print
    Current partition table (original):
    Total disk sectors available: 1953508749 + 16384 (reserved sectors)
    Part Tag Flag First Sector Size Last Sector
    0 usr wm 34 4.00GB 8388641
    1 usr wm 8388642 2.00GB 12582945
    2 usr wm 12582946 200.00GB 432013345
    3 usr wm 432013346 175.00GB 799014945
    4 usr wm 1166180386 375.43GB 1953508748
    5 usr wm 799014946 175.00GB 1166016545
    6 usr wm 1166016546 80.00MB 1166180385
    8 reserved wm 1953508749 8.00MB 1953525132
    partition>
    I am unable to specify my own tag name. How can I change the tag name to one of my interest.
    I need to create 3 partitions as told below
    partitions:
    /earth
    /mars
    /work
    /earth and /work should be roughly equal in size, /mars should be twice the size of the others, if that is possible. If not 3 partitions of equal size will do.
    Please, help me .
    Thank you.

    Exactly 1TB? Slightly under/slightly over?
    Traditional Solaris disk labels are in VTOC format, but this format cannot describe disks larger than 1TB. So EFI labels must be used on disks larger than 1TB. Setup is slightly different.
    Are these physical disks or LUNs from a SAN array? If they are array LUNS, it is often the case that they don't have a Sun label of any type. So...
    #1 Apply a Solaris label
    If the LUNS don't have a label (when selected in 'format', it gives a warning that no label is present and offers to apply a label immediately). When run non-interactively, format assumes "yes" for any questions. So all you'd have to do is select every disk to have it apply labels to any unlabled disk. Run 'format' once and find the highest number (maybe it's 50 for you). Create a text file that looks like this:
    disk 1
    disk 2
    disk 3
    disk 50Then feed that to format like this:
    # format -f /tmp/disklist or whatever you've named the file.
    #2 Apply the partition layout to all disks you want.
    You asked if you should do the same procedure, but I don't see that you've actually done anything above other than print out the existing layout. Take one of your 48 drives and partition it the way you want manually (set the slices to the sizes that you want). Then you can copy the layout of that disk to others. You only want to do this between disks/LUNs of the same size. As an example, if you've explicitly partitioned c1t0d0 and you want to apply this to c1t1d0, do this:
    # prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2Repeat for all of your other disks.
    Darren

  • How to get the root tag name

    I have a problem: I receive several XML files in my transaction input
    <?xml version="1.0" encoding="UTF-8"?>
    <NAMES>
    </NAMES>
    <?xml version="1.0" encoding="UTF-8"?>
    <VALUES>
    </VALUES>
    and I want to obtain the root tag name (the string NAMES, VALUES, ecc.).
    I obtained this result using a XSL transformation, bui I think that the best (and easiest) way is to use an XPath command. I tried but I can not find the right command.
    Does anybody know how to do this?

    I found it:
    Transaction.Source{name(/*)}

  • How to get the tag name into javascript

    Hi,
    Is there any way to get the tag name into java script when user clicks on.
    For eg: if i use netui:anchor tag, how can I pass the tag id to the javascript when user clicks on the link using onClick attribute. This tag id needs to be evaluated at run time.
    Ex code is given below.
    function fun1(){
    // how to get the tag name;
    <%
    String st="hai";
    %>
    <netui:anchor action="x" onClick="fun1()" tagId="<%=st%>>
    I want to get this tagId (st) to the java script function fun1() when user clicks on this link. How can I do that. can you please help in this issue.
    Thanks,
    Satish.

    Hi,
    You can set the java variable as a js variable at run time:
    <script>
    var anchorName = <%=getNetuiTagName%>;
    function fun1()
    var anchorID = getNetuiTagName(anchorName);
    alert(anchorID);// this will show the rendered ID for the anchor specified
    </script>
    this works because the jsp variable will be rendered before the js.
    Thanks,
    Steve

  • I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS?

    I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS? I AM GETTING LIKE 6 DUPLICATE EMAILS FOR FACEBOOK NOTIFICATIONS. HOW CAN STOP THIS??

    Perhaps you should contact Facebook?

  • How to tag people on facebook via share widget?

    How to tag people on facebook via share widget?

    You can go with Button count or box count in layout options.
    Thanks,
    Sanjit

  • Quick question: how can I save my project and posted in Facebook?

    Quick question how can I save my project and posted in Facebook?

    By using File>Save As or File>Save for Web. You can choose jpg or png.

  • The photos in Facebook posts are suddenly huge. How can I reduce size in Facebook?  When I double click photo it opens in regular size.

    The photos in Facebook posts are suddenly huge. How can I reduce size in Facebook?  When I double click photo it opens in regular size. All is well on my PC. This just started happening last night....Zoom is not on.

    Access FB through your browser and send a message to Facebook and ask them to fix their app.

  • How can i display the latest " 4 Posts" in Facebook WebPart in SharePoint?

    Hi All,
    I have created Facebook WebPart in SharePoint, using below code
    <div id="fb-root"></div>
    <script>(function(d, s, id) {
      var js, fjs = d.getElementsByTagName(s)[0];
      if (d.getElementById(id)) return;
      js = d.createElement(s); js.id = id;
      js.src = "//connect.facebook.net/en_US/sdk.js#xfbml=1&appId=807273262643415&version=v2.0";
      fjs.parentNode.insertBefore(js, fjs);
    }(document, 'script', 'facebook-jssdk'));</script>
    <div class="fb-like-box" data-href="https://www.facebook.com/FacebookDevelopers" data-width="300" data-height="200" data-colorscheme="light" data-show-faces="true" data-header="true" data-stream="true"
    data-show-border="true"></div>
    Now all Likes and Posts are displayed, here i want to display the latest " 4 Posts " only.
    how can i display the latest " 4 Posts".

    Hi,
    As a workaround, we can use jQuery to hide or remove other posts.
    http://www.w3schools.com/jquery/jquery_dom_remove.asp
    You can also connect the Facebook to find whether it provide a api to achieve your requirement or not.
    Or you can try to modify the js file. Facebook provide a debug version of the JavaScript SDK.
    https://developers.facebook.com/docs/javascript/quickstart/v2.2
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How can I change the tag name in cursor statement?

    Hi
    I have two tables: TableA and TableB. I want generate a XML file using XSU12 from these two tables, the XML structure like:
    <ROWSETA>
    <ROWA num="1">
    <A1></A1>
    <A2></A2>
    <A3>
    <A3_ROW num="1">
    <B1></B1>
    <B2></B2>
    </A3_ROW>
    <A3_ROW num="2">
    <B1></B1>
    <B2></B2>
    </A3_ROW>
    </A3>
    </ROWA>
    </ROWSETA>
    How can I change the tag name and attribute for "A3_ROW"?
    Thanks in advance!
    null

    In short, you can't.
    You can use the column alias as you're already doing to change the name of the "A3" part of "A3_ROW" but you cannot change the "_ROW" part of "A3_ROW". This is added automatically.
    You can combine the results of XSU with an XSLT stylesheet (made very simple if you're using XSU by working with Oracle XSQL Pages) to change the name of any element or completely restructure the XML output into a target XML, HTML, or text format.

  • How to get previous tag name from a xml in java

    Hai
          I need to get the previous tag name from a xml in java.
         I got the current tagname , i need to get the previous tagname
        NodeList parentactionList = lParentRule.getElementsByTagName(
    "parentactiondetails");
    i use this way of getting the the current tag name, i need to get the previous tag name ie.. before "parentactiondetails"
    for sample
    </parentruledetails>
    </Parentrule>
    </SingleParentRule>
    <parentactiondetails ACTION_FLAG="RulePass" PARENT_RULE_CODE="PR626"/>
    <ParentCompliance>
    i have xml like this i am getting the "parentactiondetails " ...  now i need to get the previous tag name </SingleParentRule> in java
    Can any one help me,

    still i am not able to get the correct value...
    i used the way wat u said it is not even going inside the if condition
    below is my actual xml as before i asked i need the before tag name of <parentactiondetails>
    ie  the closing tag of </Singleparentrule>
    i have attached the xml also
    pl reply me as soon as possible
    <?xml version="1.0" encoding="UTF-8"?>
    <GRC>
    <ParentInventory>
    <Vendor comment="" createdBy="root" vendorCode="1001" vendorName="Cisco">
    <DeviceType createdBy="root" devTypeCode="1001" devTypeName="Router" vendorCode="1001">
    <Series createdBy="root" devTypeCode="1002" seriesCode="1110" seriesName="2800" vendorCode="1001">
    <Model createdBy="root" devTypeCode="1002" modelCode="1459" modelName="4506" seriesCode="1110" vendorCode="1001">
    <Sub createdBy="root" devTypeCode="1002" modelCode="1459" seriesCode="1110" subCode="1695" subName="CAT4500-SUP4" vendorCode="1001">
    <CodeVersion createdBy="root" devTypeCode="1002" modelCode="1459" seriesCode="1110" startCode="2207" startName="12.2(25)EWA2" subCode="1695" vendorCode="1001">
    <ImageName createdBy="root" devTypeCode="1002" endCode="5508" endName="Standard" modelCode="1459" seriesCode="1110" startCode="2207" subCode="1695" vendorCode="1001"/>
    </CodeVersion>
    <CodeVersion createdBy="root" devTypeCode="1002" modelCode="1459" seriesCode="1110" startCode="2225" startName="12.2(5)T" subCode="1695" vendorCode="1001"/>
    </Sub>
    </Model>
    </Series>
    </DeviceType>
    </Vendor>
    </ParentInventory>
    <Parentrule>
    <parentruledetails COMMENTS="1PARENT_RULEFILT_AUDITPASS" CREATED_BY="root" DEVICE_LEVEL_FLAG="Configuration" PARENT_RULE_CODE="PR626" PARENT_RULE_TYPE="SPR_AP" RULE_NAME="1PARENT_RULEFILT_AUDITPASS">
    <parentscope DEVICE_TYPE_NAME="Switch" END_CODE_VERNAME="Standard" MODEL_NAME="3750-24PS" PARENT_RULE_CODE="PR626" SERIES_NAME="3750" ST_CODE_VERNAME="12.2(25)SEE2" SUP_CPU_NAME="3750" VENDOR_NAME="Cisco"/>
    <parentmultiscope COLUMN_INDEX="0" DEVICE_TYPE_NAME="Switch" END_CODE_VERNAME="Standard" MODEL_NAME="3750-24PS" MULTI_SCOPE_CODE="{1=1001~1002~ 1010~ 1131~ 1190~ 2041~E~5255}" MULTI_SCOPE_NAME="{1=Cisco~Switch~3750~3750-24PS~3750~12.2(25)SEE2~E~Standard}" OPERATOR="E" PARENT_RULE_CODE="PR626" SERIES_NAME="3750" ST_CODE_VERNAME="12.2(25)SEE2" SUP_CPU_NAME="3750" VENDOR_NAME="Cisco"/>
    <SingleParentRule CHILD_TYPE="ALL" COLUMN_INDEX="0" FILT_CONDN="PA" PARENT_RULE_CODE="PR626" RULE_CODE="PR625[AND]," RULE_TYPE_FLAG="singleparentrule">
    <Parentrule>
    <parentruledetails COMMENTS="1CUSTRULE_PARENT_CROSSREF_FAIL" CREATED_BY="root" DEVICE_LEVEL_FLAG="Configuration" PARENT_RULE_CODE="PR625" PARENT_RULE_TYPE="PCR_CR" RULE_NAME="1CUSTRULE_PARENT_CROSSREF_FAIL">
    <parentscope DEVICE_TYPE_NAME="Switch" END_CODE_VERNAME="Standard" MODEL_NAME="3750-24PS" PARENT_RULE_CODE="PR625" SERIES_NAME="3750" ST_CODE_VERNAME="12.2(25)SEE2" SUP_CPU_NAME="3750" VENDOR_NAME="Cisco"/>
    <parentmultiscope COLUMN_INDEX="0" DEVICE_TYPE_NAME="Switch" END_CODE_VERNAME="Standard" MODEL_NAME="3750-24PS" MULTI_SCOPE_CODE="{1=1001~1002~ 1010~ 1131~ 1190~ 2041~E~5255}" MULTI_SCOPE_NAME="{1=Cisco~Switch~3750~3750-24PS~3750~12.2(25)SEE2~E~Standard}" OPERATOR="E" PARENT_RULE_CODE="PR625" SERIES_NAME="3750" ST_CODE_VERNAME="12.2(25)SEE2" SUP_CPU_NAME="3750" VENDOR_NAME="Cisco"/>
    <ParentCommand>
    <Command ChildType="Console" cmdCode="37135" cmdName="login authentication &lt;string&gt;"/>
    </ParentCommand>
    <parentcustomdetails CHILD_TYPE="Console" CMD_CODE="37135" CMD_NAME="login authentication [string]" CMD_OPTION="login authentication " COLUMN_INDEX="0" CONDN_OPER="exists" CONDN_VALUE="True" PARENT_RULE_CODE="PR625" RULE_TYPE_FLAG="Customrule"/>
    <parentcustomdetails CHILD_TYPE="Console" CMD_CODE="37135" CMD_NAME="login authentication [string]" CMD_OPTION="string" COLUMN_INDEX="1" CONDN_OPER="equalsto" CONDN_VALUE="cisco" PARENT_RULE_CODE="PR625" RULE_TYPE_FLAG="Customrule"/>
    <parentcustomconsole CHILD_TYPE="Console" CONSOLE_NUM="Any" PARENT_RULE_CODE="PR625"/>
    <parentactiondetails ACTION_FLAG="CrossRef" PARENT_RULE_CODE="PR625"/>
    <parentcrossrefdetails ACTION_FLAG="CrossRef" CHILD_TYPE="Console" CMD_CODE="37135" CMD_NAME="login authentication [string]" CMD_OPTION="login authentication " COLUMN_INDEX="0" CONDN_OPER="exists" CONDN_VALUE="True" PARENT_RULE_CODE="PR625"/>
    <parentcrossrefdetails ACTION_FLAG="CrossRef" CHILD_TYPE="Console" CMD_CODE="37135" CMD_NAME="login authentication [string]" CMD_OPTION="string" COLUMN_INDEX="1" CONDN_OPER="equalsto" CONDN_VALUE="AAAAAA" PARENT_RULE_CODE="PR625"/>
    <parentcrossrefconsole ACTION_FLAG="CrossRef" CHILD_TYPE="Console" CONSOLE_NUM="Any" PARENT_RULE_CODE="PR625"/>
    <ParentCompliance>
    <PRComp comments="Group Policy is an important and useful addition to your Active Directory deployment. Managing your internal network and ensuring compliance .Group Policies are a set of &quot;rules&quot; that are applied to different parts of a Windows-based network" compCode="1006" compName="INTERNAL GROUP POLICY" createdBy="root" url="http://www.INTERNAL GROUP POLICY.com"/>
    <PRComp comments="This is the compliance for the department of Security agency" compCode="1012" compName="DISA" createdBy="root" url="http://iase.disa.mil/stigs/checklist/"/>
    <PRComp comments="This is the compliance from the National Security Agency" compCode="1013" compName="NSA" createdBy="root" url="http://checklists.nist.gov/chklst_detail.cfm?confi"/>
    <PRComp comments="he Center for Internet Security (CIS) is a not-for-profit organization that helps enterprises reduce the risk of business and e-commerce disruptions resulting from inadequate technical security controls, and provides enterprises with resources for measuring information security status and making rational security investment decisions" compCode="1020" compName="CIS" createdBy="root" url="http://www.cisecurity.org/"/>
    <PRComp comments="This is a Cisco document. It outlines the key security elements identified for Network Security Baseline, along with implementation guidelines to assist in their design, integration, and deployment in production networks. " compCode="1022" compName="Cisco Secuirty Baseline" createdBy="root" url="http://www.cisco.com/en/US/docs/solutions/Enterpri"/>
    <PRComp comments="This is the best practices from industry experts to help make audit recommendations in a customers environment. " compCode="1023" compName="360 GRC Best Practice" createdBy="root" url="http://www.360grc.com"/>
    </ParentCompliance>
    <parentriskrecommendationdetails ACTION_FLAG="CrossRef" AUDIT_RESULTS="Both_pass_fail_result" CHILD_TYPE="ALL" CMD_CODE="fdg" COMMAND_REF="dfs" DEFINITION="dfgd" DEVICE_RECOM_CATEGORY_CODE="IP - Addressing Services" DEVICE_RISK_CATEGORY_CODE="IP - Addressing Services" DISP_LEVEL="Parent and child result" PARENT_RULE_CODE="PR625" RATING1="2" RATING1_NAME="DISA" RATING2="2" RATING2_NAME="NSA" RATING3="2" RATING3_NAME="Cisco Secuirty Baseline" RATING4="2" RATING4_NAME="CIS" RATING5="2" RATING5_NAME="360 GRC Best Practice" RATING6="2" RATING6_NAME="INTERNAL GROUP POLICY" RATING_IMPACT="Low" RATING_PRIORITY="Low" RATING_URGENCY="Low" RECOMENDATION="ss" WEB_REF="sfs" WEIGHTING1="10" WEIGHTING1_NAME="DISA" WEIGHTING2="10" WEIGHTING2_NAME="NSA" WEIGHTING3="10" WEIGHTING3_NAME="Cisco Secuirty Baseline" WEIGHTING4="10" WEIGHTING4_NAME="CIS" WEIGHTING5="10" WEIGHTING5_NAME="360 GRC Best Practice" WEIGHTING6="10" WEIGHTING6_NAME="INTERNAL GROUP POLICY"/>
    </parentruledetails>
    </Parentrule>
    </SingleParentRule>
    <parentactiondetails ACTION_FLAG="RulePass" PARENT_RULE_CODE="PR626"/>
    <ParentCompliance>
    <PRComp comments="Group Policy is an important and useful addition to your Active Directory deployment. Managing your internal network and ensuring compliance .Group Policies are a set of &quot;rules&quot; that are applied to different parts of a Windows-based network" compCode="1006" compName="INTERNAL GROUP POLICY" createdBy="root" url="http://www.INTERNAL GROUP POLICY.com"/>
    <PRComp comments="This is the compliance for the department of Security agency" compCode="1012" compName="DISA" createdBy="root" url="http://iase.disa.mil/stigs/checklist/"/>
    <PRComp comments="This is the compliance from the National Security Agency" compCode="1013" compName="NSA" createdBy="root" url="http://checklists.nist.gov/chklst_detail.cfm?confi"/>
    <PRComp comments="he Center for Internet Security (CIS) is a not-for-profit organization that helps enterprises reduce the risk of business and e-commerce disruptions resulting from inadequate technical security controls, and provides enterprises with resources for measuring information security status and making rational security investment decisions" compCode="1020" compName="CIS" createdBy="root" url="http://www.cisecurity.org/"/>
    <PRComp comments="This is a Cisco document. It outlines the key security elements identified for Network Security Baseline, along with implementation guidelines to assist in their design, integration, and deployment in production networks. " compCode="1022" compName="Cisco Secuirty Baseline" createdBy="root" url="http://www.cisco.com/en/US/docs/solutions/Enterpri"/>
    <PRComp comments="This is the best practices from industry experts to help make audit recommendations in a customers environment. " compCode="1023" compName="360 GRC Best Practice" createdBy="root" url="http://www.360grc.com"/>
    </ParentCompliance>
    <parentriskrecommendationdetails ACTION_FLAG="RulePass" AUDIT_RESULTS="Both_pass_fail_result" CHILD_TYPE="ALL" CMD_CODE="dfg" COMMAND_REF="dfgdf" DEFINITION="dfgdf" DEVICE_RECOM_CATEGORY_CODE="IP - Addressing Services" DEVICE_RISK_CATEGORY_CODE="IP - Addressing Services" DISP_LEVEL="Parent and child result" PARENT_RULE_CODE="PR626" RATING1="3" RATING1_NAME="DISA" RATING2="3" RATING2_NAME="NSA" RATING3="3" RATING3_NAME="Cisco Secuirty Baseline" RATING4="3" RATING4_NAME="CIS" RATING5="3" RATING5_NAME="360 GRC Best Practice" RATING6="3" RATING6_NAME="INTERNAL GROUP POLICY" RATING_IMPACT="Low" RATING_PRIORITY="Low" RATING_URGENCY="Low" RECOMENDATION="dfgdf" WEB_REF="dfgdf" WEIGHTING1="10" WEIGHTING1_NAME="DISA" WEIGHTING2="10" WEIGHTING2_NAME="NSA" WEIGHTING3="10" WEIGHTING3_NAME="Cisco Secuirty Baseline" WEIGHTING4="10" WEIGHTING4_NAME="CIS" WEIGHTING5="10" WEIGHTING5_NAME="360 GRC Best Practice" WEIGHTING6="10" WEIGHTING6_NAME="INTERNAL GROUP POLICY"/>
    </parentruledetails>
    </Parentrule>
    </GRC>

  • How to get comment tag name

    iam using a xml file
    some of the tag names are commented before uncomment them i want to get the those tag names
    please help me

    In my application iam using a xml file.
    for this xml file i created a swing application to modify that
    iam representing the tags of xml file in swing application by using jtree,
    and i want to comment that node by creating a menu and click that menu item.
    and my question is after commenting the tag i want again the node to be uncommented for some resons
    help me

  • How to change the Discussion board view to facebook posting type view

    hi friends..
    i want to change the discussion board view to facebook posting type.Where multiple discussions and comments on single page as well as all the comments should be in a threaded view and also i want to find a new discussion
    link in same page.
    can any one help me...

    Hi,
    As I understand, you would like to improve discussion board to display all posts on a single page with comments.
    There is no OOB option to customize discussion board. However, there are workarounds:
    You could create a site with Blog site template, and it could meet your requirement. More information about Blog site:
    http://office.microsoft.com/en-in/sharepoint-foundation-help/create-a-blog-HA010378201.aspx
    You could use Note Board web part instead, and customize it to allow reply:
    http://social.technet.microsoft.com/Forums/en-US/f7e466ee-ab53-47c5-9dd9-232e295bca6f/sharepoint-2010-note-board-web-part?forum=sharepointgeneralprevious
    You could customize Discussion Board directly using Content Query Web Part and XSL:
    http://sharepointsolutions.com/sharepoint-help/blog/2013/04/custom-discussion-board-rollup-using-content-query-web-part-and-xsl/
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Custom tag names in Awesome WM?

    How do I create custom tag names in the Awesome WM?

    Hi!
    You did not specify which version you are running... So I just thought it might help if I posted the relevant part of my config. I think there is other ways to do it, but this works for me, in both the version in AUR, which is a snapshot of 3.3 development version, and the newest 3.3-rc4. Perhaps it might work in earlier versions too! Enjoy:
    -- {{{ Tags
    -- Define tags table.
    tags = {}
    tags.settings = {
    { name = "urxvt", layout = layouts[1], },
    { name = "www", layout = layouts[1], },
    { name = "media", layout = layouts[7] },
    { name = "mail", layout = layouts[7], },
    { name = "other", layout = layouts[10], setslave = true },
    -- Initialize tags
    for s = 1, screen.count() do
    tags[s] = {}
    for i, v in ipairs(tags.settings) do
    tags[s][i] = tag(v.name)
    tags[s][i].screen = s
    awful.tag.setproperty(tags[s][i], "layout", v.layout)
    awful.tag.setproperty(tags[s][i], "setslave", v.setslave)
    awful.tag.setproperty(tags[s][i], "mwfact", v.mwfact)
    end
    tags[s][1].selected = true
    end
    You can find my entire config at: http://dotfiles.org/~KlavKalashj
    Last edited by KlavKalashj (2009-05-30 17:36:12)

Maybe you are looking for