How do I take a picture using my macbook pro?

How do I take a picture using my macbook pro?

What kind of picture? Screen Shot? Command-Shift 3
Using the Camera? Check out Photo Booth. It's in your applications folder.

Similar Messages

  • How do I take a picture with my MacBook computer?

    How do I take a picture using my MacBook computer

    You should have an program called Photo Booth in your Applications folder. Launch it, turn the MacBook towards what you want to take a picture of (using the screen as a viewfinder) and click on the camera button (or press command - T on your keyboard)  to take the picture.
    Best of luck.

  • How can I take lion off of my MacBook Pro and go back to using Snow Leopard

    How can I take lion off of my MacBook Pro because it has too much problems with the new operating system, I have talked to Apple support for both computers and still nothing happens I think they know that there's something wrong and they don't know how to fix it are there working on fixing it. So how can I put snow leopard Mac on my computer so that it works every time, there's a lot of good features in Lion but there's a lot of bad features and especially when it comes to turning on your computer and the memory that it has held so if one item is missing then it doesn't work and you have to reboot the computer to get it to work but I still like my Mac.

    Take a look at this:
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    Ciao.

  • How do i take a snapshot on my macbook pro

    how do i take a snapshot on my macbook pro, anyone can help? thank you in advance, I am sure its very simple

    You can use the shortcuts Austin listed, or you can use the Grab screen shot utility that came with your Mac, or you can use the File / Take Screen Shot commands in Apple Preview.

  • How do you take a screenshot on a Macbook pro?

    How do you take a screenshot on a Macbook Pro?

    Take a picture of the whole screen
    Command (⌘)-Shift-3
    Take a picture of part of the screen
    Command (⌘)-Shift-4, and then drag the crosshair pointer to select the area. Continue to press the mouse button, release the keys, and then press Shift, Option, or the Space bar while you drag to resize the selection area. When you are ready to take a picture, release the mouse button.
    To cancel, press Escape before you release the mouse button.
    Take a picture of a window or the menu bar
    Command (⌘)-Shift-4, press the Space bar, move the camera pointer over the area to highlight it, and then click.
    To cancel, press Escape before you click.
    Take a picture of a menu, including the title
    Click the menu to display the menu commands, press Command (⌘)-Shift-4, and drag the crosshair pointer over the area.
    To cancel, press Escape before you click.
    Take a picture of the menu without its title
    Click the menu to display the menu commands, press Command (⌘)-Shift-4, press the Space Bar, move the camera pointer over the menu to highlight it, and then click.
    To cancel, press Escape before you click.

  • How do I get imported pictures (from my macbook pro) onto my iPhone 5?

    How do I get my imported pictures (from my macbook pro) onto my iPhone 5?

    Hey ther Caraaaaa,
    It sounds like you have some photos you have imported to your computer that you would like to sync to your phone. This article should help you navigate to, and configure photo syncing from iTunes to your device:
    iTunes: Syncing photos
    http://support.apple.com/kb/ht4236
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • How can i backup my pictures from my macbook pro that doesnt let me log in? I just want to get the pictures i have in it, everything else is not important.

    Last night i uninstalled Aperture from my macbook pro 13 inch, 2010. After i restarted my mac (as required) it didnt let me log into my account. I was only able to log into my guest account. Either way, my screen would flicker as if something was wrong. So now im thinking of doing a clean install but first i want to get my pictures. I do have an external hard drive 1tb that i could use.

    See if you can get your hands on a firewire cable, and another Mac. If so, target disk mode should solve your problems.
    http://support.apple.com/kb/PH10725

  • How do I take a screen shot with MacBook Pro?

    Thought I could take a screen shot with my MacBook Pro but can't find any instructions.  Help

    Press the Shift, Command, and 3 keys to capture the entire screen.
    Press the Shift, Command, and 4 keys to capture a draggable part of the screen.
    Press the Shift, Command, and 4 keys followed by the spacebar to capture a window.
    Open the png on the desktop.
    (82116)

  • HT4236 How can I move my pictures on my MacBook Pro laptop over to my iPhone?

    I had pictures on my iPhone 4s and moved them over to my MacBook Pro.  After they moved over successfully, I somehow erased them off my phone.  I didn't want to do that. Is there a way to move them back to my iPhone?  It seemed to me that I had only 2 choices to pick when I was done syncing my computer and my iPhone; reset or start over (like new phone).  I picked reset.  Appreciate any help!  Thnaks!!

    While you're synching (presumably your iPhone is connected to your computer via iTunes), click on your iPhone's icon in iTunes on the left.  You'll see lots of tabs near the top right, one of which is "Photos".  Click on that and you should see plenty of sync options for your photos, one of which will be right for you.  Then click "Apply" near the bottom when finished.

  • How do I download a picture from my Macbook Pro to a website?

    OK, maybe I'm missing something obvious, but I can't figure it out.  I was updating my medical information, which is a website, and there is a place to download a picture of myself.  I clicked on browse and it opened up Finder.  So far, so good.  I then clicked on pictures in finder and it open up some cryptic folders. One of these folders is iPhoto which is where to picture is located.  If I clck on iPhoto it opens up another set of cryptic folders. At this point I gave up.  Why in the H*** does Apple make something that is so easy on a Windows machine, so difficult?  Any help would be appreciated.

    It appears that you are browsing folders within iPhoto library, rather than Library itself.
    When you click Browse you want to go to your Photos option under "Media" list in the sidebar (see screenshot). That is where you can select your iPhoto and project/picture.
    What you could also do most of the time is to drag the photo from iPhoto directly onto "Browse" button in your browser

  • How do I take mountain lion off my MacBook Pro

    I recently updated my 2009 MacBook Pro to mountain lion and it has been a disaster. My computer gets very hot, up 170 degrees F and it freezes up and beacballs. I tried to reinstall snow leopard but it will not reinstall and freezes up during the install process. When I run a disk utility it says my hard drive is fine. Can you return your computer back to snow leopard?

    Did you Wipe the drive of Mt Lion before you started the Snow Leopard install? If not that is what you have to do.
    You can't install an older operating system over the top of a newer version.
    Can you return the system bac to Snow Leopard? YES you can.
    Boot the system from the Snow Leopard DVD and open Disk utility. Re-Partition the drive as ONE Partition. Then exit DU and start the install of SL.

  • How do i move pictures from my macbook pro to a portable drive

    How do I move my pictures from my macbook pro to a portable drive?

    Drag them there in the Finder. If you're moving an iPhoto library and not loose photos, the drive, partition, or disk image you're putting them on needs to be formatted as Mac OS Extended.
    (82189)

  • How to take a screenshot on a MacBook Pro

    How can I take a screenshot on my macbook pro?

    Press the Shift, Command, and 3 keys to capture the whole screen.
    Press the Shift, Command, and 4 keys to capture a draggable part of the screen, or follow it with the spacebar to capture a window.
    Open the PNG on the desktop. Alternatively, combine either of the above with the Control key to put the screenshot onto the clipboard instead of the desktop.
    (109188)

  • How do I format a disk on my Macbook Pro?

    How do I format a disk for pictures using my Macbook Pro?

    I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " MacBook Pro " where it may get a more rapid response from your fellow users.
    Tell us your OS X version and what disk brand and its specifications.
    ÇÇÇ

  • Can I use Image Capture to take a picture using a Canon EOS 10D?

    Normally I use a card reader to download digital photos, but today I hooked my camera directly to my iMac. I then noticed the "Take Picture" button, so I tried to use it to take a picture with my Canon EOS 10D. Image Capture didn't refuse, it just showed the 'cogwheel' animated cursor and got stuck. What does this mean - is it that this particular camera won't work or that there is something wrong with the setup? I have other digital cameras, but I don't want to work all this out by experiment alone - how can I find out more about how this feature of IC works and what exactly is going on when I press "Take Picture"? There is absolutely no technical info in the Help files.

    The Help on Image Capture has the following:
    Many cameras let you take a picture using Image Capture when the camera is connected to your computer.
    To take a picture:
    Connect your camera and open Image Capture.
    Click Download Some.
    Click Take Picture.
    The camera snaps a picture, which then appears in the window.
    If you don’t see the Take Picture icon, choose View > Customize Toolbar, and drag the Take Picture icon to the toolbar.
    If the Take Picture icon is dimmed, your camera doesn’t support this feature.
    As the option is available to you, your camera supports +Tethered Shooting+. If it’s not working check your camera’s manual to see do you need this enabled on your camera.
    Regards
    TD

Maybe you are looking for

  • Using Icy Dock in a Mac Pro

    Just want to confirm that if I get the Icy Dock from OWC for $25 I can put in Intel's new X25-M SSD. Then take my Bay #3 sled and treat the Icy Dock like any other naked 3.5" HDD and attach the 4 sled screws, slide it in the Mac. I am going to use th

  • How to find out which object on a JPanel was clicked...

    I have a JPanel that contains about 200 other small JPanels(only 8 are visible at any one time), and a JButton(with Visible set to false). When one of the small JPanels is rightclicked i want to know which one was clicked so I can add the JButton to

  • Primary Key Migration - Hierarchical Structures

    Hi, I'm involved in looking at a migration of a hierarchical database to ORACLE. For some table types the primary keys at the top of the hierarchy are compound ones and these need to be migrated to the next level of hierarchy. At the next level of hi

  • Clearing through F.13 with spl gl indicator

    hi All, Is there any possibility to clear spl gl through F.13

  • Issue in COPY function in IP

    HI, We are facing an issue in COPY function in IP. Few Time characteristics are not copying from Actual to plan cube. We have Three Actual cubes and one plan cube. We are using COPY function and changing Info provider , currency and version Character