How do I take a recorded disc and burn that to a blank disc

Hi
I need to take a recorded disc and burn it to a blank disc

1. Insert the DVD/CD;
2. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
3. from the DU File menu select New | Disk Image from Disk 1;
4. Choose to format the disk image as DVD/CD Master, name the disk image and click Save;
5. When the .cdr file is finished select it with mouse and press COMMAND-I to open the Get Info and check the box to lock the file;
6. Choose the .cdr file from the left side list, click Burn, and insert a new, blank DVD or CD.

Similar Messages

  • I have an iphone 4, how do I take stored voice messages and record them to a stick?

    I have an iphone 4, how do I take stored voice messages and record them to a stick?  A family member passed away and I want to keep their voice.

    Hey there!
    Sadly, there is no way to do this.
    I'm sad to hear you've lost a familymember.
    Try this: Move in a quiet-room. Play his/her voice over speaker of your iphone and record it with free recording-softwarefor windows or mac.
    Hope this will help you keeping the memory.

  • I have synced a family members iphone to my accont on itunes! how do i take it off mine and sync it to his account?

    i have synced a family members iphone to my accont on itunes! how do i take it off mine and sync it to his account?

    Try this site - they are free
    http://www.zedge.net/

  • HT3702 I would like to remove the credit card info from my account and only use iTunes prepaid cards. How do I take care of this and make sure that payment will be taken from iTunes cards? Thanks

    I would like to remove credit card info from account and only use iTunes prepaid cards. How do I take care of this and make sure payments are takin from the iTunes cards? Also, I need to change my last name and address on account.

    Hi Alexis ...
    I need to change my last name and address on account.
    Help here >  How to change the name you use for your Apple ID
    I would like to remove credit card info from account and only use iTunes prepaid cards.
    Help here >  Create an iTunes App Store account without a credit card

  • How can I take my pdf book and revert it to indesign so I can make a few changes on it?

    How can I take my pdf book and revert it to indesign so I can make a few changes on it?

    Kasyan Servetsky wrote:
    As far as I know, the best approach is to place pdf-file into a new InDesign document with “Multi Page Importer” script. Then create a new layer above the layer with PDFs and make small edits there creating new objects – text frames, etc – and hiding the original parts in the PDF below.
    That isn't an option - the obscured content will often still export and it'll completely mess up accessibility and compliance.
    The only true option would be to export a Word file from the PDF (using Acrobat Pro), import the text into a brand new INDD document using the usual style-mapping workflows, then export the images from the PDF separately and place them all back into the layout. Quicker than typing it all in again, but only just. Consider it a learning curve.

  • My iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    Sea water and electronics don't mix.  The salinity fries the internal circuitry of the phone. Your phone is toast.
    Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght?  Your photos and numbers should be safely backed up on your computer or in the cloud.
    If you didn't do this, there's no way to recover those data now.  Backups are meant to be done BEFORE disaster strikes, not after.

  • How i can take all record that start for Epi using a select?

    How i can take all record that start for Epi using a select?
    exemple
    select objnr from jest where objnr = 'Epi*'  -
    so don't go

    Is case important? Can it be "EPI"?
    I think case is important, so do it like Shakir showed you, but put it in upper case.
    Rob
    Message was edited by:
            Rob Burbank

  • How can I delete apps in iTunes and have that sync to my iPhone and iPad?

    How can I delete apps in iTunes and have that sync to my iPhone and iPad? I don't want to delete 3 separate times for each item. I just carefully chose 30-35 apps to get rid of via iTunes, hoping it would sync to my devices, only to find I have to repeat the process on my iPad, take notes, then repeat it on my iPhone. It wasn't always so tedious was it?
    Here's the "Help" I got from Apple. They even quoted my question back to me then proceeded to answer with something very different and completely missing the point.
    I understand that you would like to delete the Apps. I know how eager you are to get the required information and I will be happy to assist you.
    You can remove individual songs, audiobooks, and videos from your iPod, iPhone, or iPad. Removing an item from your device doesn't delete it from your iTunes library.
    To remove items from a device other than an iPod shuffle, first make sure that iTunes is set up to manually manage items.
    1. Connect your iPod, iPhone, or iPad to your computer.
    2. When the iPod, iPhone, or iPad icon appears in iTunes, select it.
    3. Unless your device is an iPod shuffle, click the Summary tab and make sure "Manually manage music and videos" or "Manually manage music" is selected.
    4. If the disclosure triangle to the left of your iPod, iPhone, or iPad (below Devices) is closed, click the triangle so that you can see the device's contents.
    5. Select the item you want to delete and press the Delete key.
    This was not helpful in any way and I am still unable to delete apps on my devices in a global, iTunes based way. Each device still requires its own independent process.

    Match was off.  I made all of the changes and then went through the "Turn on iTunes Match" option.  I now have deleted some tracks, edited the Metadata in CDDA, and then added it back.  This worked fine, but it is not a good solution.
    I just tried making some edits and use the "Update iTunes Match" and that seemed to work.  It looks like the real answer is that Match must be up and operational, then you can make changes and run the Update to incorporate the changes.  However, if Match has a problem then Signing Out and back in to your store account and going through the process of Turning On Match (were you get the questions, "Add this Computer to Match" will overwrite any changes. 
    Since this relies on the stability of iTunes, I won't be making a lot of changes between updates.

  • How do I share in the music and apps that my children have purchased, but maintain my own identity?

    How do I share in the music and apps that my children have purchased, but maintain my own identity?

    You don't. Everythng downloaded with one Apple ID can not be transfered to another Apple ID. So you would need to buy it a second time. This is one of the Pit Falls of the whole Download only model.
    That is why I refuse to buy things like music or movies that are tied to a specific User Name, ID.

  • How can I install all my music and movies that I bought into my computer?

    How can I install all the musics and movies that I bought from iTunes into my computer?

    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store

  • How to Check source systems in RSA1 and verify that connections are working

    How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

    Hi,
    In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
    Regards
    Vinod

  • How do I make a Disk image and burn an install Disk

    How do I make a Disk image and burn an install Disk, Ive tried it a couple of times, but will not boot up.

    Thanks for getting back to me, Yes it does, it came with the machine.
    Hi pfhannon,
    Does the original Install disk that you are copying,
    boot your computer?
    You may be successfully making a copy of a disk that
    is not suitable for your machine.
    regards roam

  • Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting beeps

    Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?

    If you can't eject a CD or DVD or open the drive tray
    How do I eject a defective DVD?: Apple Support Communities
    How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
    From:
    Mac computers: About startup tones
    3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
    1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
    3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

  • How do I take a datagrid row and put in textInput

    On a search form we have a datagrid that will be populated from a database.  My task is to take the row a user clicks on to populate forms with the data.  Essentially this is taking one row and putting each field into its own textInput control.
    Each of the controls are linked to an XML tag:
    <mx:XML id="dmSearch">
        <data>
            <SearchResults>
                <result>
                </result>
            </SearchResults>
            <SearchCriteria>
            </SearchCriteria>
            <RecProcess>
                <ADDRESS />
                <AGE />
            </RecProcess>
    So the "ADDRESS" is bound:
                        <mx:FormItem id="dtAddress"
                            label="Address"
                            y="35" x="5"
                            width="275"
                            horizontalAlign="right">
                            <mx:TextInput id="RECPROVIDERADDRESS"
                                text="{dmSearch.RecProcess.RECPROVIDERADDRESS}"
                                change="dmSearch.RecProcess.RECPROVIDERADDRESS=RECPROVIDERADDRESS.text; lcConnector.setDirty();"
                                width="140"
                                maxChars="50"/>
                        </mx:FormItem>
    I want to pull the data from this grid:
                        <mx:Form id="searchResults"
                            horizontalCenter="0">
                            <mx:FormItem id="lblSearchResults"
                                label="Search Results" indicatorGap="0">
                                <mx:DataGrid id="dgSearchResults"
                                    click="dataGridClicked()">
                                    <mx:columns>
                                        <mx:DataGridColumn id="colSODC"
                                            dataField="{dmSearch.SearchResults.SODC}"
                                            headerText="SODC"
                                            headerWordWrap="false" />
                                        <mx:DataGridColumn id="colLastName"
                                            dataField="{dmSearch.SearchResults.LASTNAME}"
                                            headerText="Last Name"
                                            headerWordWrap="false" />
                                        <mx:DataGridColumn id="colFirstName"
                                            dataField="{dmSearch.SearchResults.FIRSTNAME}"
                                            headerText="First Name"
                                            headerWordWrap="false" />
                                        <mx:DataGridColumn id="colMHDDID"
                                            dataField="{dmSearch.SearchResults.MHDDID}"
                                            headerText="MHDDID"
                                            wordWrap="false" />
                                        <mx:DataGridColumn id="colRIN"
                                            dataField="{dmSearch.SearchResults.RIN}"
                                            headerText="RIN"
                                            wordWrap="false" />
                                        <mx:DataGridColumn id="colSSN"
                                            dataField="{dmSearch.SearchResults.SSN}"
                                            headerText="SSN"
                                            wordWrap="false" />
                                    </mx:columns>
                                </mx:DataGrid>
                            </mx:FormItem>
                        </mx:Form>
    The datagrid doc at http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html doesn't seem to cover this at all.

    Hi, Greg.
    Each of the textInput items are bound to an XML item:
                        <mx:FormItem id="gWorkPhone"
                            label="Work Phone"
                            x="5"
                            width="250"
                            horizontalAlign="right">
                            <mx:TextInput id="WORKPHONE"
                                text="{dmResults.WORKPHONE}"
                                change="dmResults.WORKPHONE=WORKPHONE.text; lcConnector.setDirty();"
                                width="115"
                                maxChars="50"/>
                        </mx:FormItem>
    (I changed the name in trying to work this out.  I created two XML items (dmSearch and dmResults) which I assume is OK.)
    The item will either contain (through some magic I don't understand yet) the data from the user selected datagrid or blanks for input of new records.  The grid items are filtered based on the search function (resulting in an error):
                var psrSODC:String = dgSearchResults.selectedItem.colSODC as String;
               if (psrSODC != null && psrSODC.length > 0)
                    XMLRecord = dmResults(SODC == psrSODC);
    There are several of these statements as the user might enter 1 to n criteria.  Is this the way to filter the input grid to one record?  And how does "XMLRecord" know the layout of the file?

  • How do i take my music, apps, and photos from one ipod and put it on another ipod?

    I got a new ipod but still have my old one, how do i take everything from my old one and put it on the new one?? please help me!! thanks

    Sync them to the same computer running the same iTUnes logged into the same iTunes account and stuff should transfer over quite easily

Maybe you are looking for

  • Reading ZIP files

    Is it possible to read content of ZIP files. Iam using ORACLE forms 6i. In our company, we are creating a zip file with two folder src and lib, where SRC contains FMB files abd LIB contains PLLfiles.Now i want to know whether instead of us seeing the

  • ORA-20001: Secondary key column identified wwas not located in the select l

    Error in mru internal routine: ORA-20001: Secondary key column identified was not located in the select list of the query I am receiving this error when I try and update a record in an updatable report (SQL QUERY Updateable). Two of the values being

  • Trouble connecting ipod to computer

    When I plug my ipod nano into the computer the computer recognizes it as my ipod but a message keeps coming up on itunes saying an ipod has been detected but it cannot be identified properly and to disconnect and try again. I have done this repeatedl

  • Photoshop crushes frequently when I work with just 2 or 3 layers

    Hi! I am running Photoshop CC  on a PC with the following features: Processor: Intel Core I7-4790 3.60 GHz RAM: 8 GB OS: Windows 8.1 64 bits Motherboard: Asus Z97 I thought this would be more than enough to run Photoshop without problems, but it crus

  • Why do button highlights suddenly have jagged edges after a test burn, especially for round buttons?

    Hi, I would like to know how to make menu buttons look perfect when they are highlighted. Some tutorials I found say that I have to create menus in HD first, then from that Encore would render it to the right size or dimensions. I tried that route as