How do I tell if an HP Printer has wireless networking capability?

I posted a message on another sub-forum about a specific problem I was having (i.e. getting a HP Laserjet P3015n to wirelessly network with a new Apple Extreme Base Station) and it occured to me that, even after reading through the product page description of the actual printer, and the corresponding Troubleshooting/FAQ page, I don't even know if the 3015n even has wireless capability.
Is there a way to tell which HP printers have such capability?
On older printers, I used to see the little red/black window at the bottom that I presumed was a little thingey that was an infrared beam that presumably indicated the possibility wireless connectivity. But I'm not so sure now.
I'm specifically interested in good quality, heavy-use HP Printers for my home network and a small (10 work station and 1 server) network at work.
So is there a list of these wireless-capable printers somewhere or some lingo that's used that indicates such? It's probably obvious, but I'm missing it. Though the allure of fewer cords is certainly something I like!
Thanks for the help!

You can make it wireless for about $21.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

How do I tell if a new T40 has wireless

Sorry i have to ask such a basic and seemingly simple questions, but I cannot figure this out. I had a T40 2373-1U1 model on which the motherboard went bad. I bough a "bare bones" type system off eBay, installed my old hard drive and am running again. The new system is a 2373-7CU. I do see the little antenna symbol at the bottom of the LCD screen when it's opened. I do not see the bluetooth symbol like my last computer had. however, when I get into the device manager and check for a wireless network adapter, none are there (just the hard wire adapter). I tried the add new hardward wizard, but it found nothing to add. Any hints from those of you who know much more than me. Thanks - Ken
Solved!
Go to Solution.

you can only use Thinkpads/IBM sourced version of wireless cards, other companies' version may give you an error message.
Hardware maintenance manual can be accesed from here for T40
and more information regarding T40 can be accessed from here

How can I tell if my iPad 5 has A2DP?

How can I tell if my iPad 5 has A2DP?

http://support.apple.com/kb/HT3647
There is no "iPad 5" as an official model designation. Did you mean an iPhone 5 as you list in your profile?
Regards.

How can I tell if my mini iPad has Retina display

How can I tell if my mini iPad has retina display

This is a hardware report of the iPad 4 using SystemStatus (tap to enlarge image)

How do i tell what software my ipad2 has on it

How do i tell what software my ipad2 has on it

Are you planning to connect your iPad to your computer and using iTunes upgrade your software to iOS 5.0.1 (that's the current OS available for iPad)? I would certainly suggest you update. If you do, then the manual on your iPad will also be updated.

How can i know the exact model of my wireless network card? macbook pro 13"

how can i know the exact model of my wireless network card? macbook pro 13"

I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
charlie

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

HT4356 How can I tell if my AirPrint printer is on the same network as my router

How can I tell if my printer is on the same network as my wireless router

iMac Obsessed wrote:
I've had my MacBook Pro Retina since the 17th and am only now realising that my firewall was not on. I've already connected to a network via ethernet at my job so that I can have access to the internet. How can I tell if my personal info is safe?
As long as you are behind a router, you don't need to have your firewall turned on at all, in fact it probably slows your computer and/or internet connection down a bit. The only time you need it is to either protect yourself against intrusion from others on your local network or if you hook your computer directly to a cable / DSL modem. See Thomas Reed's Do I Need a Firewall?

How can i tell if my iphone 4 has been hacked into?

Here is the situation.....a friend of mine is in a bad marriage. She found out her husband bugged her laptop and her phone and is finding out all of her conversations. The other day, we were all at a buffet restaurant and he was sitting at the table with us, without thinking anything of it, I left my purse with my phone at the table while all but him went up to the bar. Later on that night, I was in the car with another friend and we were talking in detail about our friends situation. The next day my friend whom I was talking to in the car, checked her answering machine, and our conversation was on her machine. I checked my call log AND detailed billing from AT&T thinking I may have butt dialed her house, but there is no record of me calling her house. The same with her, she as no record of calling her house and her home phone does not have caller ID. This guy is very tech savy and is the manager of 4 AT&T stores. Is it possible for him to have hacked into my phone and put some sort of bug in it? If this is possible, is it also possible for my phone to be able to record our conversation without a call being placed? If it is possible, how can I tell if my phone has been hacked?
Thanks

It would be extremely difficult for someone to be able to grab your iPhone out of your purse and hack into it without having a laptop computer with him with which to jailbreak the iPhone and time to work on it. I can't say it would be impossible, though. I'd suggest as a precaution you perform a Restore on your iPhone; if it restores successfully that would clear any jailbreak and remove any hack.
http://support.apple.com/kb/ht1212
Regards.

How can I tell what microprocessor my computer has

How can I tell what microprocessor and operating system I have on my Mac? Also wheter it is 32 or 64 bit? How much RAM? I want to purchase software, but not if it won't work.

Apple>About This Mac>More Info

How do I tell if the RMAN Registration has worked correctly?

Am using Oracle, DataProtector and SAP with RMAN and am registering the database in RMAN using the standard DataProtector commands.
How do I tell that the database has actually registered the catalog inside the RMAN DB? I can do a "list backups" but it does not tell me whether the control file is being used for the catalog or the RMAN Database. Can anyone assist?
Share and Enjoy! Ian

I believe I have registered the database to use the
RMAN Database to store the catalog - how do I confirm
this?issue some rman commands which access the recovery catalog like 'list backup' or ask the recovery catalog:
'select * from rc_database'
regards,
-ap

How to get Mac and PC to print via wireless

I have a G4 20" iMac that is hardwired to high speed cable internet. I also have PC that I need to print from but, is not hard wired to anything. In fact, it is imperative that the PC not be hooked to the internet. I am buying a HP 1320 laser and I would like to print from both computers. How can I set up wireless printing to the HP 1320 so both my iMac and PC can print while keeping the PC totally free from the internet?

you have a few options, but you should provide more information.
1. do both your imac and pc (is it a desktop or laptop?) have wireless capability already?
2. is your imac connected through a router (wireless or wired), or directly to the cable modem?
given you have wireless capability in both imac and pc, you have a few options.
1. If you just want to use a wireless print server (wps) create ad-hoc connection between your imac and wps and between your pc and wps.
2. if you are using a wireless router, you can configure the client IP Filters to bloc internet access for the pc. Or, you can keep the wired internet connection to the imac and use the wireless router to control your wireless network.
i think your best option is #1, though. just ensure you do not have internet sharing enabled on your imac.

How do I tell if my MacBook Pro has an I7-8xx or I7-9xx processor?

I know it has an I7 4 core running at 2.8GHz. But how can I tell if its an 8xx or 9xx proc?

Check out the website everymac.com you will find specs for all machines including the processor numbers.

How can I tell if my macbook pro has been restored to factory settings?

I just bought I brand new macbook pro (15,4 inch) from an official apple store... but I'm thinking that it may be used (it was a bit dirty when I opened it, but it has no scratches).
I tried with coconut battery, but it went ok, the battery is new. However they might have changed it.
Is there a way to know if the mac was restored to factory settings?
... if not, is there any other way to know if is a used laptop?
Thanks,

cycle count says 1... wich correspond to the initial battery discharge I just did. That's why I think they may have changed the battery.
Serial number is C02FHFG0DF8V... how can you tell if this correspond to a refurbished unit?
It has all the "official" envelops of a brand new mac... the thing is that I found small dust specks all over the interior of the box and in the accesories (not on the notebook itself).
According to coconut "Age of your Mac" is 11 weeks.
That's why I thought the only way I could knew for sure if they used it before (maybe for showcasing at the store) was finding out if it was restored to factory settings. (Also I bought it in an official apple store).

How could I tell if my iPhone 4s has been jailbroken?

Hello everyone!
I'm sorry if this may sound extremely stupid, but I'm not very good with the whole Apple hardware, and what makes it tick.
I had read something about jailbroken iPhones and hacking viruses, and just before I had read that, I had encountered someone on Tumblr (through Safari, not the Tumblr application, if there is one...I don't personally have an account, but I browse the site) who had suffered some kind of hacking virus.
I panicked a little, wondering if there was a possibility the virus from their blog could effect my iPhone, and a few searches on Safari later, I then panicked about whether my iPhone could possibly be jailbroken.
I'm not looking for any websites to check whether the phone is jailbroken or not, (it probably isn't), and I'm not looking to jailbreak it, but I've recieved so much help from these communities I thought it wouldn't hurt to ask this silly question.
I've heard a lot about the whole loading screen (when you first turn the phone on and the apple logo with the little crease through the apple shows up) being different, etc, and a whole slew of others.
Everything looks normal....the loading screen is black with the apple logo and crack/crease/curved line...whatever you wish to call it, but it won't stop me from being paranoid, haha.
Could anyone help? Just how could I tell without downloading or messing with anything on my phone or computer?

If it's your iPhone and you've not jailbroken it, why would you be concerned that it might be jailbroken?
Did you purchase it from Apple or another reseller? OR from some average joe on the street, ebay, or craigslist?
The only way to jailbreak a device is to physically get your hands on it.

How do I tell if an HP Printer has wireless networking capability?

Similar Messages

Maybe you are looking for